高比重钨合金研究的新进展

分别从原材料、烧结工艺及其后处理、强韧化和杂质影响等方面较系统地介绍了国内外近十年来在高比重钨合金领域所取得的进展，并从这些方面详细讨论了影响高比重钨合金性能的具体因素。在此基础上对钨合金今后的发展方向提出了意见。     

粉末冶金温压工艺的研究进展及其展望

综述了粉末冶金温压工艺的研究进展,概述了温压工艺的粉末原料、聚合物、温度、压力、烧结环节对温压工艺的影响和温压工艺的致密化机理。详细介绍了温压工艺的新进展—流动温压、高压温压等,并对其应用前景进行了展望。     

第一炼钢厂3号大方坯连铸机特点及试生产

介绍由西门子-奥钢联技术总负责的武钢第一炼钢厂3号大方坯连铸机的主要技术特点,如结晶器液位自动控制LevCon和DynaFlex振动技术、铸坯导向系统、Dynacs二次冷却技术、DynaGap动态轻压下技术、全自动开浇技术、VAI-Q方坯质量控制系统等,并简要介绍投产2个月以来新技术的应用情况和生产情况.     

具有正温度系数的2:17型Sm(Co,Fe,Cu,Zr)z永磁体的研究现状

总结了矫顽力具有正温度系数的2:17型Sm(Co,Fe,Cu,Zr)z永磁体的研究现状;分析了成分与胞状显微组织对矫顽力正温度系数的影响,概括了目前解释矫顽力正温度系数的几种矫顽力机制模型,提出了对矫顽力正温度系数的研究是高温永磁体Sm(Co,Fe,Cu,Zr)z今后一个很有前景的新研究方向.     

Warm Compaction Process of P/M Steels by Orthogonal Testing Method

In order to achieve higher density of P/M steels using the die wall lubrication compacting method or powder lubricant in warm compaction process, the influence of different process parameters on the green density of warm compacted samples was studied. According to the orthogonal test method, the authors systematically study the influence of the different compaction pressure, condition of lubrication and compaction temperature on the green density of the sample in the warm compaction process, and put forward the optimal process parameter of warm compaction experiment. It is found that, a high compaction pressure （≥700 MPa）, die wall lubrication combined with a small amount of internal lubricants, and fitting compaction temperature by different condition of lubrication, are the optimal parameters in warm compaction process.     

Effects of warm compaction on mechanical properties of sintered P/M steels

The green and sintered densities,and tensile strength of sintered P/M steels produced by cold compaction,warm compaction,warm compaction combined with die wall lubrication(DWL)were measured under various compaction pressures using polytetrafluoroethylene(PTFE)emulsion as the die wall lubricant.The effects of warm compaction on the mechanical properties were studied.The tensile fracture behaviors of cold compaction and warm compaction were studied using scanning electron microscope(SEM).The results show that the density of sintered P/M steel prepared by warm compaction or warm compaction with DWL is higher than that by cold compaction under all compaction pressures.Meanwhile,the highest tensile strength is obtained by combination of warm compaction and die wall lubrication under all compaction pressures.The SEM results show that the fracture modes of the sintered samples prepared by cold compaction and warm compaction at 700 MPa are the mixed mode of ductile fracture and brittle fracture,and obvious dimples can be found in some regions.The fracture of sample prepared by cold compaction is uneven and has irregular and big pores,but that by warm compaction is relatively even and the pores are round mostly,and the samples have many obvious dimples on the whole fracture surface.     

2Mo81Ni17Fe磁粉芯磁导率的工艺影响因素

本文以氮气雾化2Mo81Ni17Fe合金粉末为原料,采用粉末冶金方法制备了2Mo81Ni17Fe磁粉芯,测试了磁粉芯的磁导率.主要讨论了磁粉芯磁导率的影响因素.结果表明,磁粉芯的磁导率随着绝缘剂添加量的增加而减少,随着压制压力以及热处理温度的提高而上升.     

纳米晶高密度钨合金的研究进展

介绍了近几年来纳米晶钨基高密度合金的研究状况,讨论了粉末制备的机械合金化法、喷雾干燥法和反应喷射工艺法,同时详细讨论了粉末的注射成形以及包括固相烧结、二步烧结在内的烧结工艺.最后,从这些方面分析了影响纳米晶钨合金性能的具体因素,以及对高密度钨合金今后的发展方向提出了建议.     

超导体MgB2超导电性及制备技术的研究进展

介绍了新型超导体MgB2的基本超导电性,综述了MgB2材(多晶)、线材和带材的主要制备技术,并对MgB2超导材料的应用前景进行了展望.