Investigation of Nanometer- and Submicron-Size Dispersed Phases in Titanium Pseudo- β -Alloys using Scattering and Diffraction of Neutrons,Electrons, and X-Ray Radiation

Metal Science and Heat Treatment - The size and volume fraction of fine particles of secondary β -phase formed during hardening heat treatment of pseudo-β-titanium alloy VT22 are...     

Organizing the production of heat-insulating inserts for ingot-mold hot tops

The Zlatoust Metallurgical Plant has developed a technology that employs semi-dry pressing to make two-layer (composite) heat-insulating inserts for ingot-mold hot tops. The working layer is made of a mixture of materials based on quartz sand, while the insulating layer is based on foamed vermiculate. The binders are sodium silicate solution and commercial lignosulfonate with a density of 1.12–1.20 g/cm³.     

Development and adoption of measures for increasing the safety of power-generating units of nuclear power plants with RBMK reactors in 1986–2005

The basic stages and directions of upgrading and reconstruction of the power-generating units of nuclear power plants with RBMK reactors over a period of 20 yr since the Chernobyl accident are reflected in this paper. The greatest amount of work was done in 1986–1990 on all units with RBMK-1000 and-1500 reactors which were operating at that time in the USSR. The purpose of the upgrade was to improve the neutron-physical characteristics of the reactor cores, increase the response speed of the safety and control system and decrease the positive effect of water outflow from the cooling loop of this system, increase the flow capacity of the systems performing emergency discharge of the steam-gas mixture from the reactor, and improve the basic operating documentation. The subsequent stages of the upgrading and reconstruction concerned mainly the first-generation power-generating units (Nos. 1 and 2 units of the Leningrad and Kursk nuclear power plants). These works were performed to make the power-generating units conform to the requirements of the modern normative documents on safety and allow for the possibility of these units to remain in operation after the nominal 30-yr service life has been exhausted. __________ Translated from Atomnaya énergiya, Vol. 100, No. 4, pp. 312–320, April, 2006.     

Improved Prediction of Ozone Levels in Urban and Rural Atmospheres

Based on data obtained in terms of the first International cooperative program on the effects of acidic precipitations on materials (ICP Materials) of the United Nations European Commission on Economics (UN ECE), the relations between the ozone O₃ and nitrogen dioxide NO₂ concentrations in combination with the sunshine effect (taken into account either as the solar radiation (Rad) or the sunshine duration (Sun)) are considered. Analysis based on monthly and annual averages led to a new equation recommended for predicting ozone levels over rural, urban, and industrial areas of Europe as a function of NO₂ concentration and Sun parameter. Using Rad instead of Sun provides similar results, but, for practical usage, the equation involving a more easily available parameter Sun was recommended. The new equation corrects and improves the earlier proposed one, in which the concentration of ozone was given as a function of NO₂ concentration solely, and is included in the UN ECE Manual on mapping critical loads / levels and geographical areas where they are exceeded.     

Design of the experimental air curtain for the dam of the Krivoporozhsk hydroelectric station

Translated from Gidrotekhnicheskoe Stroitel'stvo, No. 10, pp. 11–13, October, 1992.     

Use of signals from space vehicles for determining the metrological characteristics of frequency and time standards

In this paper methods are considered for checking frequency and time standards used at control points. The most effective of the checking methods proposed is based on the use of spaceborne time-scale signals transmitted by space vehicles. The checking devices, the main computing relationships, and the test results are described.Translated from Izmeritel'naya Tekhnika, No. 7, pp. 31–32, July, 1993.     

General solution of one-dimensional,time dependent coupled heat flow systems

A new, powerful method of analysis, involving the combined use of finite integral transform and finite element techniques, is presented for the solution of time dependent heat flow systems composed of many one-dimensional elements connected through the nodes. This method leads to an eigenvalue problem which is not of the conventional Sturm-Liouville type. A procedure for the determination of the eigenvalues is described. The solution obtained is in the form of an infinite series and contains quasi-steady and transient terms. The general solution obtained can be applied in the mathematical modelling of many engineering applications such as the determination of the penetration of the daily temperature cycle into buildings, the analysis of heat transfer in array of extended surfaces in compact heat exchangers, and many others.