Anonymous location sharing in urban area mobility

Knowledge and Information Systems - This work studies the location-privacy preserving location update in the context of data-centric people mobility applications. The mobility model involves an...     

Dyeing of poly(lactic acid) fibres with synthesised novel heterocyclic disazo disperse dyes

Poly(lactic acid) (PLA) is the first melt‐processable, renewable, sustainable and biodegradable natural‐based synthetic fibre. It has a broad range of uses and combines ecological advantages with outstanding performance in textiles. PLA fibre, as an aliphatic polyester, can be dyed with disperse dyes. Apart from the limited number of commercial disperse dyes, disperse dye exhaustion on PLA is generally lower than that on  poly(ethylene terephthalate) (PET). In this study, new heterocyclic disazo disperse dyes, substituted with methyl, nitro and chloro groups at their ortho‐, meta‐ and para‐ positions, synthesised in our previous study, were applied to PLA and PET fibres to examine their dyeing performance, and colour fastness and dye exhaustion properties. Different shades of yellow, orange, reddish brown and brown were obtained. Most of the synthesised novel heterocyclic disazo disperse dyes exhibited good build‐up properties with high K/S levels on both fibres. Para‐ bonding substituent provided higher K/S values than meta‐ and ortho‐ positions for –NO₂ and –Cl substituents for both fibres. Overall, the most synthesised novel heterocyclic disazo disperse dyes in this study exhibited good build‐up properties with high K/S, exhaustion and wet fastness levels on both PLA and PET fibres.      

Usage of bioactivated PCL nanofiber as a fluoxetine capturing matrix in milk

ABSTRACT

In this study, for the first time, polycaprolactone (PCL) nanofiber matrix was bioactivated for the removal of fluoxetine from milk. Bioactivated nanofiber was prepared by immobilizing fluoxetine antibody on PCL nanofiber matrix. The fluoxetine removal efficiency of bioactivated nanofiber in milk was found to be approximately 93.6%. This removal did not significantly change the biochemical composition of milk. In conclusion, as a novel product, bioactivated nanofibrous PCL matrix can be used for the removal of drugs or unwanted chemicals from breast milk or from other fluids.     

Reordering for improving global Arnoldi–Tikhonov method in image restoration problems

This paper discusses the solution of large-scale linear discrete ill-posed problems arising from image restoration problems. Since the scale of the problem is usually very large, the computations with the blurring matrix can be very expensive. In this regard, we consider problems in which the coefficient matrix is the sum of Kronecker products of matrices to benefit the computation. Here, we present an alternative approach based on reordering of the image approximations obtained with the global Arnoldi–Tikhonov method. The ordering of the intensities is such that it makes the image approximation monotonic and thus minimizes the finite differences norm. We present theoretical properties of the method and numerical experiments on image restoration.     

Glycation of soy protein isolate with two ketoses: d-Allulose and fructose

Modification of food proteins to have improved functional properties is of great importance. In this study, modification of soy protein isolate (SPI) was achieved through glycation. SPI was glycated in a spray dryer (SD) and an incubator followed by freeze drying (FD). d -Allulose, an important rare sugar, was used in SPI glycation as the carbohydrate source, and results were compared with fructose. In addition to the sugar type, two different SPI powder: sugar ratios (1:1 and 5:1) were investigated. For the glycated samples, emulsification activity, free amino groups, protein solubility, Fourier-transform infrared spectroscopy analysis, antioxidant activity experiments and time-domain NMR relaxometry measurements for hydration were conducted. According to the results, the solubility of SPI that is limited in native form has shown a significant improvement after glycation through both FD and SD methods. Besides, glycation through the FD method was found to be more favourable due to its milder conditions than the SD method. Considering the physicochemical properties, the best combination for the highest glycation degree was found to be the samples prepared at the 1:1 ratio with d -Allulose in the FD method. Overall, it was concluded that glycation of SPI enhanced its functional properties such as antioxidant and emulsification activities.     

Characterization of Fenugreek (<Emphasis Type="Italic">Trigonella foenum-graecum</Emphasis>) Seed Lipids

The composition and content of lipids, fatty acids, triacylglycerols, tocopherols and sterols in nine fenugreek genotypes were analyzed. Lipid content in fenugreek seeds ranged from 5.8 to 15.2%. Major fatty acids were: linoleic acid (45.1–47.5%), α-linolenic (18.3–22.8%), oleic (12.4–17.0%), palmitic (9.8–11.2%) and stearic (3.8–4.2%) acids. The ratios of n-6 to n-3 fatty acids were between 2.1 and 2.7. Similar fatty acid distribution was observed in all analyzed samples with some deviations. α-Tocopherol was the predominant component found in the fenugreek lipid antioxidants, and it constituted over 84% of the total amounts of tocopherols. It amounts ranged from 620 to 910 mg/kg lipids. β-Sitosterol was the major sterol in all samples, varying from 14,203 to 18,833 mg/kg of lipids. Campesterol and cycloartenol were other major sterols, and these compounds including β-sitosterol constituted 56–72% of all sterols. Fenugreek seed lipids consisted predominantly triunsaturated (56.9–66.5%) and diunsaturated (32.2–41.6%) triacylglycerides. Among these components trilinolein (LLL; 12.9–20.5%) dominated followed by PLL (14.0–20.4%), LnLnO (7.8–17.7%), PLO (5.7–11.6%), OLL (6.9–10.6%), LLLn (3.2–9.6%), and LnLnL (3.5–7.6%). Results of the study show that fenugreek seed lipids may be a source of a nutraceutical ingredient for food applications.     

Casting properties of ASTM A128 Gr. E1 steel modified with Mn-alloying and titanium ladle treatment

This work aims to produce a high manganese steel with more refined austenite grains and better wear resistance without sacrificing the toughness and tensile properties by Mn alloying and Ti ladle treatment in comparision to ASTM A128 Gr. E1 steel (1.0C-13Mn) that is mostly used in the mining industry. The 1.0C-17Mn-xTi alloys (x=0, 0.05 and 0.1, in wt.%) were prepared. A relationship was established between the microstructures and mechanical properties of the as-cast and solution annealed alloys. Increasing Ti content increases the stable Ti(CN) phase on and beside the grain boundaries and decreases up to 37% the austenite grain size of the as-cast alloy with 0.10wt.% Ti. Correspondingly, after solution annealed, optimized titanium content (0.05wt.%) results in significant improvements in wear resistance, hardness, elongation, yield and tensile strengths by 44%, 31%, 30%, 8% and 12%, respectively, except 9% decrease in impact toughness compared to ASTM A 128 Gr. E1 steel without modification. These results show that 1.0C-17Mn-0.05Ti alloy can be used for parts exposed to high load wear and applied in conditions where relatively high tensile properties with sufficent ductility is needed.

     

On linear logic planning and concurrency

We present an approach to linear logic planning where an explicit correspondence between partial order plans and multiplicative exponential linear logic proofs is established. This is performed by extracting partial order plans from sound and complete encodings of planning problems in multiplicative exponential linear logic. These partial order plans exhibit a non-interleaving behavioural concurrency semantics, i.e., labelled event structures. Relying on this fact, we argue that this work is a crucial step for establishing a common language for concurrency and planning that will allow to carry techniques and methods between these two fields.     

Measuring the Impact of an Individual Course on Students' Success

Background At the University of Michigan, qualified first‐year students who place out of the first‐semester calculus course may enroll in either the regular second‐semester calculus course or Applied Honors Calculus II. Students who enroll in Applied Honors Calculus II show higher academic performance than students enrolling in the Regular Calculus II. Purpose (Hypothesis ) The study addressed the question: does enrollment in Applied Honors Calculus II have a positive causal impact on subsequent academic performance for engineering students at the University of Michigan? Design /Method We acquired seven years of institutional data for engineering students who entered the University of Michigan from 1996 through 2003 and who qualified to enroll in Applied Honors Calculus II. Using regression analyses, we tested a causal model of impact of Applied Honors Calculus II on four measures of subsequent academic performance: grade in Physics II and average grade in all subsequent physics, mathematics, and engineering courses. Results After controlling for students' personal characteristics and prior academic achievement, the impact of Applied Honors Calculus II on students' academic performance was not statistically significant. In particular Advanced Placement scores accounted for the higher performance observed in Applied Honors Calculus II students. Conclusions We recommend including Advanced Placement scores in models that predict academic performance. Future research should also include measures of socioeconomic status (SES) and explore interactions between SES and academic background. Finally, in evaluations of specific curricula, the treatment effect—measured as treatment group mean minus control group mean, after controlling for covariates—is unlikely to be large if the control group receives high quality instruction.     

A Modular Superconducting Generator for Offshore Wind Turbines

In this study, a new claw-pole type transverse flux superconducting generator topology is presented. The machine has a stationary superconducting field winding, which eliminates electrical brushes and cryocouplers. The machine is specifically designed for low-speed high torque applications such as large offshore wind turbines. The proposed machine is robust and has a modular structure. A 30 kW, 100 rpm prototype is planned to be manufactured to prove the concept. MgB2, YBCO, and BSSCO wires are compared in terms of wire length, operating temperature, and critical temperature. The magnetic flux penetrating into superconducting wire has been simulated using 3D FEA software. Moreover, mechanical loads are estimated and the deflections in the structure are analysed.