Fabrication of ceramic particles from preceramic polymers using stop flow lithography

Stop flow lithography (SFL) combines aspects of microfluidic and photolithography to continuously fabricate particles with uniform planar shapes as dictated by a mask. In this work we aim to expand the palette of materials suitable for SFL processing by investigating the use of UV-crosslinkable preceramic polymers to make ceramic particles. A commercially available methacrylated-polysiloxane was used as the preceramic polymer and was mixed with 2.5 wt% Irgacure 651 photoinitiator. A simple SFL system was assembled to continuously fabricate UV-crosslinked preceramic polymer particles in the shape of hexagons, triangles, and gears with diameters ranging from 100 to 200 μm and thicknesses of 74 μm +/- 4 μm. Particles were harvested from the excess preceramic solution, cleaned and then pyrolyzed at 1000 °C to transform them into silicon oxycarbide ceramic particles. Particle shape was maintained during pyrolysis despite a ～80 % linear shrinkage due to the removal of acryl and methyl side groups, as confirmed via FTIR. After pyrolysis the outer diameters of the SiOC particles ranged from 20 to 40 μm with thicknesses of 10 μm–12 μm. Pyrolyzed particles were successfully recovered and dispersed in water. This work demonstrates a robust path for the fabrication of ceramic particles with specific shapes from preceramic polymers via SFL.     

Catalytic Activity of Ceramic Honeycombs in the Exhaust Gas Oxidation of a Waste Treatment Plant

The activity of ceramic honeycombs with varying material composition and degree of utilization is compared on a suitable model gas in a test plant. The tested honeycombs are standard products that have not been surface‐treated in any way. A propane‐air mixture was fed to the test plant and then oxidized in a high‐temperature furnace. The analysis of the conversion rate over the reaction temperature showed remarkable differences in activity. The honeycomb with the most promising results was further investigated with the exhaust gas from the drying process of a waste treatment plant. Finally, the activity of this honeycomb was assessed in a large‐scale trial in an existing running regenerative thermal oxidizer.     

Impact of spinel forming systems (Fe-/Mg-/Mn-Al-O) as functional coating materials for carbon-bonded alumina filters on steel melt filtration

Since solid, non-metallic inclusions influence considerably the quality of casted steel products, carbon-bonded alumina foam filters are used in secondary metallurgical treatments to remove these particles from steel melts. In order to attain a significant improvement of the filtration process, five different carbonaceous spinel compounds from the Fe-/Mg-/Mn-Al-O systems are applied on carbon-bonded alumina filters in this study and investigated with regard of their filtration efficiency. However, these spinel compounds decompose partially during sintering at 1400?°C under reducing atmosphere, wherefore the resulting coatings contain not only spinel compounds, but also oxidic and metallic components. The subsequent interaction with molten steel leads to the development of multicrystal structures on the filter surface, which stem from interfacial reactions between coating materials, molten steel, and inclusions. As a result of this procedure, a reduction of almost 60% alumina inclusions is measured with the aid of an automatic SEM, whereby spinel compounds from the Fe-Mn-Al-O system achieve highest filtration efficiencies.     

Mineral Oil Hydrocarbons (MOSH/MOAH) in Edible Oils and Possible Minimization by Deodorization Through the Example of Cocoa Butter

Mineral oil hydrocarbons (MOH) are present in many fats and oils as well as foods prepared thereof. A survey of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) in different types of vegetable fats and oils is reported. Contents of MOSH/MOAH were quantified using liquid chromatography online‐coupled to gas chromatography with flame‐ionization detection (LC‐GC‐FID). Cocoa butter (n = 142) showed levels from <LOQ (2.5 mg kg^?1) to 162 mg kg^?1 ΣMOSH (sum of C10–C50) and <LOQ to 55 mg kg^?1 ΣMOAH, in palm oil (n = 21) ΣMOSH were quantified from <LOQ to 124 mg kg^?1 and ΣMOAH from <LOQ to 39 mg kg^?1. Sunflower oil showed lower levels: ΣMOSH were determined in the range of <LOQ to 17 mg kg^?1 and MOAH were not observed at all. A possible influence of deodorization and a subsequent minimization of MOSH/MOAH was investigated. Systematic model‐experiments were performed on laboratory scale using spiked cocoa butter. Significant minimization of volatile MOH subfractions ≤C24 were observed at a deodorization temperature of 210 °C. Deodorization can be considered as an important processing step to reduce or even remove volatile MOSH/MOAH ≤C24. Practical Applications: Regardless of their possible entry routes into the food chain, volatile fractions of MOSH/MOAH can be removed by deodorizing vegetable fats and oils. This model‐study identifies the temperatures of deodorization that provide a significant improvement toward minimization of undesired MOSH/MOAH.     

风情西班牙 马德里AXEL酒店

正Axel酒店坐落于马德里文学街区中心的一栋19世纪的大楼内,在西班牙"黄金世纪"时期,这一地区曾是一个重要的文化中心。经过岁月的洗礼,大楼至今仍保留着橙色的外墙和典雅的阳台。接手此次酒店设计的是西班牙室内设计工作室EL EQUIPO CREATIVO,设计师以西班牙著名导演佩德罗·阿莫多瓦(Pedro Almodóvar)的电影为灵感,在酒店内融入了马德里非常传统并广受欢迎的特色元素和一些著名的视觉元素。     

Structure−Activity Relationships of Cinnamate Ester Analogues as Potent Antiprotozoal Agents

Protozoal infections are still a global health problem, threatening the lives of millions of people around the world, mainly in impoverished tropical and sub-tropical regions. Thus, in view of the lack of efficient therapies and increasing resistances against existing drugs, this study describes the antiprotozoal potential of synthetic cinnamate ester analogues and their structure-activity relationships. In general, Leishmania donovani and Trypanosoma brucei were quite susceptible to the compounds in a structure-dependent manner. Detailed analysis revealed a key role of the substitution pattern on the aromatic ring and a marked effect of the side chain on the activity against these two parasites. The high antileishmanial potency and remarkable selectivity of the nitro-aromatic derivatives suggested them as promising candidates for further studies. On the other hand, the high in vitro potency of catechol-type compounds against T. brucei could not be extrapolated to an in vivo mouse model.     

Contribution of the Internal and External Oxygen to the Oxidation of Microencapsulated Fish Oil

Microencapsulation aims to protect polyunsaturated fatty acids against oxidation by embedding oil droplets in a solid matrix. In such a system the internal (dissolved and entrapped) and external (in the environment) oxygen can be differentiated. The study aims to quantify the impact of both oxygen sources on the oxidation of microencapsulated fish oil. The impact of the solubilized oxygen in bulk fish oil is investigated by saturating the oil with nitrogen, synthetic air, and pure oxygen. Even though more dissolved oxygen results in more oxidation products, the difference between the oxidation of the nitrogen and air saturated oil is significant but low. For encapsulated fish oil powders, the internal oxygen is modified by preparing oil‐in‐water emulsions under atmospheric and inert conditions. The feed is atomized and spray dried with either nitrogen or air. Powders are stored under vacuum and in vials and the hydroperoxides and anisidine value are determined in the total‐ and encapsulated oil. The internal oxygen has a minor impact, whereas the external oxygen is the main determinant for autoxidation. Apart from oxidizing the non‐encapsulated oil, the external O₂ penetrates into the particle and reacts with the encapsulated oil. Practical Applications: Comparing the contribution of the internal and external oxygen to the oxidative stability shows that the internal O₂ plays a minor role and can be neglected. This means that the emulsion preparation as well as the spray drying process can be conducted under ambient conditions. An inert production is not extending the shelf life significantly as long as the external O₂ determines oxidation. The focus should be on optimizing the diffusion barrier properties of the wall matrix to reduce the penetration of the external oxygen into the particle system. Alternatively, packaging solution reducing the external O₂ will extend the shelf life of the microencapsulated oil.     

CMC jackets for metallic pipes – A novel approach to prevent the creep deformation of thermo-mechanically loaded metals

Steel materials suffer extensive creep by the application at temperatures of about 700?°C and pressures about 350?bar in a power plant environment. The presented concept overwraps a steel pipe with a ceramic matrix composite (CMC) jacket in order to support the steel pipe and provide high temperature strength. Finite Element simulations show the influence of the wall thickness of CMC jacket and the coefficient of thermal expansion (CTE) on circumferential stresses within the hybrid metal ceramic pipe. Suitable fiber and matrix materials were studied, composites fabricated and mechanical properties determined. Finally, a prototype was designed in order to confirm the feasibility of the concept. The lifetime of a pure steel pipe was increased by more than four-fold by the additional CMC jacket.