Eco-friendly electronics,based on nanocomposites of biopolyester reinforced with carbon nanotubes: a review

ABSTRACT

Fabrication of electronic materials from nanocomposite of biopolyesters reinforced with carbon nanotubes can be regarded as the effective alternative for conventional nanocomposites consisting of non-biodegradable polymers. Commercial availability of biopolyester-based nanocomposites is limited because of their high cost compared to other polymers, but the factor of their compostable nature is worthless for environmental protection. Such nanocomposites have potential applications in biodegradable sensors, EMI materials, etc. In this review, the current progress of biopolyester/CNTs nanocomposites in the field of biodegradable electronics is reviewed and also the impact of CNTs dispersion on electrical, thermal and mechanical properties of eco composites is stipulated.     

Working conditions in ferrite production and ways of improving them

Conclusions It has been established that, in connection with the production of nickel-zinc, manganese-zinc, and barium ferrites, conditions develop which are unfavorable from the standpoint of the health of the workers. This applies particularly to the preparation of mixtures from sulfates for the production of ferrites of the first two types mentioned.In connection with the selection of the technological process for the production of ferrites, a preference between the two available variants should be given from the hygienic standpoint to the one in which metal oxides are used as raw material. The investigation which has been conducted made it possible to formulate the basic requirements to which the production of ferrites should conform.     

Accuracy of digital measurement of dynamic magnetic characteristics of soft-magnetic materials

The errors of measurements of dynamic magnetic characteristics of soft-magnetic materials due to sampling in time and signal-level quantization during analog-digital conversion are analyzed considering the effect of the computing algorithm for sinusoidal signals.Translated from Izmeritel'naya Tekhnika No. 7, pp. 40–43, July, 1993.     

Anemia prevalence and risk factors in pregnant women in an urban area of Pakistan

BACKGROUND: Anemia affects almost two-thirds of pregnant women in developing countries and contributes to maternal morbidity and mortality and to low birthweight. OBJECTIVE: To determine the prevalence of anemia and the dietary and socioeconomic factors associated with anemia in pregnant women living in an urban community setting in Hyderabad, Pakistan. METHODS: This was a prospective, observational study of 1,369 pregnant women enrolled at 20 to 26 weeks of gestation and followed to 6 weeks postpartum. A blood sample was obtained at enrollment to determine hemoglobin levels. Information on nutritional knowledge, attitudes, and practice and dietary history regarding usual food intake before and during pregnancy were obtained by trained interviewers within 1 week of enrollment. RESULTS: The prevalence of anemia (defined by the World Health Organization as hemoglobin < 11.0 g/dL) in these subjects was 90.5%; of these, 75.0% had mild anemia (hemoglobin from 9.0 to 10.9 g/dL) and 14.8% had moderate anemia (hemoglobin from 7.0 to 8.9 g/dL). Only 0.7% were severely anemic (hemoglobin < 7.0 g/ dL). Nonanemic women were significantly taller, weighed more, and had a higher body mass index. Multivariate analysis after adjustment for education, pregnancy history, iron supplementation, and height showed that drinking more than three cups of tea per day before pregnancy (adjusted prevalence odds ratio [aPOR], 3.2; 95% confidence interval [CI], 1.3 to 8.0), consumption of clay or dirt during pregnancy (aPOR, 3.7; 95% CI, 1.1 to 12.3), and never consuming eggs or consuming eggs less than twice a week during pregnancy (aPOR, 1.7; 95% CI, 1.1 to 2.5) were significantly associated with anemia. Consumption of red meat less than twice a week prior to pregnancy was marginally associated with anemia (aPOR, 1.2; 95% CI, 0.8 to 1.8) but was significantly associated with lower mean hemoglobin concentrations (9.9 vs. 10.0 g/dL, p = .05) during the study period. A subanalysis excluding women with mild anemia found similar associations to those of the main model, albeit even stronger. CONCLUSIONS: A high percentage of women at 20 to 26 weeks of pregnancy had mild to moderate anemia. Pica, tea consumption, and low intake of eggs and red meat were associated with anemia. Women of childbearing age should be provided nutritional education regarding food sources of iron, especially prior to becoming pregnant, and taught how food choices can either enhance or interfere with iron absorption.     

Scanning electron microscopy as a tool for authentication of biodiesel synthesis from Linum usitatissimum seed oil

Utilization of renewable and alternative energy feedstocks such as nonedible seeds oil to deal with the increasing energy crises and related ecological concerns have gained the attention of researchers. Biodiesel is an efficient and renewable substitute for diesel engine. This work investigates the potential of inexpensive nonedible seed oil of Linum usitatissimum to synthesize biodiesel using iron sulfate green nanocatalyst through the process of transesterification. Flax seed contains about 37.5% oil content estimated through Soxhlet apparatus. Light microscopy revealed that seed size varies from 3.0 to 6.0 cm in length, 2.0 to 3.3 cm in width, and 0.7 to 1.0 mm in diameter. Color of seed varied from yellow to brown. Characterization of biodiesel is performed through GC–MS and FTIR. Scanning electron microscopy was carried out to study the morphological features of seed coat. Catalyst was characterized by scanning electron microscopy, energy diffraction X-ray, and X-ray diffraction. The diffraction peaks of Fe₃O₄ green nanoparticles were found to be in 2θ values, 30.24°, 35.62°, 38.26°, 49.56°, 57.12°, and 62.78°. Fuel properties of biodiesel are also determined and compared with ASTM standards. Linum usitatissimum biodiesel has density 0.8722 (15°C kg/L), kinetic viscosity 5.45 (40°C cSt), flash point (90°C), pour point (−13°C), cloud point (−9°C), sulfur (0.0432% wt), and total acid number (0.245 mg KOH/g). It is concluded that L. usitatissimum seed oil is a highly potential source for biodiesel production to cope with the challenge of present energy demand.     

Noninvasive evaluation of Bjork-Shiley convexo-concave prosthetic heart valves

Prosthetic heart valves of the Bjork-Shiley convexo-concave (BSCC) type have been used extensively in implants; however, there have been reports of cases where one component of the valves failed, leading to the demise of the patient. This paper presents a new method for noninvasive electromagnetic evaluation for this type of valve, using an eddy current transducer with orthogonal coils. In vitro experiments on BSCC prosthetic heart valve replicas have shown that discontinuities of outlet strut with depths equal or larger than 0.4 mm can be detected with a probability of detection (POD) of 86.4%, and in the case of discontinuities with depth equal or larger than 0.6 mm with POD of 97%. Blind tests effectuated on 32 BSCC prosthetic heart valves have shown that, using the proposed method, the tested valves have been correctly classified.     

2D Eddy current sensor array

This paper presents the design and development of a two-dimensional eddy current sensor array and the improved response of the array using a super-resolution algorithm. A computational model of the array is derived using dyadic Green's function and volume integral method. This application was realized for detecting fatigue cracks, introduced in AISI 304 samples by subjecting them to cyclical loading.