Generalized differential quadrature analysis of MHD mixed convective motion of Casson fluids past an isothermal irregular slender geometry via Cattaneo–Christov's approach

Classical Fourier's theory is well-known in continuum physics and thermal sciences. However, the primary drawback of this law is that it contradicts the principle of causality. To explore the thermal relaxation time characteristic, Cattaneo–Christov's theory is adopted thermally. In this regard, the features of magnetohydrodynamic (MHD) mixed convective flows of Casson fluids over an impermeable irregular sheet are revealed numerically. In addition, the resulting system of partial differential equations is altered via practical transformations into nonlinear ordinary differential equations. An advanced numerical algorithm is developed in this respect to get higher approximations for temperature and velocity fields, as well as their corresponding wall gradients. For validating our numerical code, the current outcomes are compared with the available literature results. Moreover, it is revealed that the velocity field is more prominent in the suction flow situation as compared with the injection flow case. It is also found that the Casson fluid is hastened in the case of lower yield stress. Larger values of thermal relaxation parameters create a lessening trend in the temperature distribution and its related boundary layer breadth.     

Biodiversity and technological properties of yeasts from Turkish sourdough

Food Science and Biotechnology - In this study, yeasts were isolated and characterized from twelve traditional sourdough samples which belongs to Black Sea and Aegean regions of Turkey. Twenty six...     

Advanced Friction–Wear Behavior of Organic Brake Pads Using a Newly Developed System

The objective of this study was to investigate the influence of an advanced performance system on the tribological behavior of brake pad material using a specially designed brake pad tester system following standard SAE J-661. The tribological behavior and friction and wear characteristics of the organic brake pad samples were evaluated. During braking tests, the samples, in contact with a cast iron disk, were studied at different disc speeds, temperatures, and braking cycles under a constant pressure. In order to understand the friction and wear behavior, the unworn surfaces, worn surfaces, and wear debris were characterized by means of scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). Furthermore, the surface characteristics and differences in the wear modes of the brake pad samples were examined. Wear debris was permitted to deform the brake pad surfaces, leading to friction layers and enabling the estimation of the friction behavior of the brake pads. The results showed that the best friction–wear behavior was obtained with lower braking cycles at low speeds and temperature. Thus, the newly developed brake pad tester system proved very effective in evaluating the performance of the brake pad samples.     

Destructive and non-destructive evaluation of concrete for optimum sand to aggregate volume ratio

Aggregates are the biggest contributor to concrete volume and are a crucial parameter in dictating its mechanical properties. As such, a detailed experimental investigation was carried out to evaluate the effect of sand-to-aggregate volume ratio (s/a) on the mechanical properties of concrete utilizing both destructive and non-destructive testing (employing UPV (ultrasonic pulse velocity) measurements). For investigation, standard cylindrical concrete samples were made with different s/a (0.36, 0.40, 0.44, 0.48, 0.52, and 0.56), cement content (340 and 450 kg/m³), water-to-cement ratio (0.45 and 0.50), and maximum aggregate size (12 and 19 mm). The effect of these design parameters on the 7, 14, and 28 d compressive strength, tensile strength, elastic modulus, and UPV of concrete were assessed. The careful analysis demonstrates that aggregate proportions and size need to be optimized for formulating mix designs; optimum ratios of s/a were found to be 0.40 and 0.44 for the maximum aggregate size of 12 and 19 mm, respectively, irrespective of the W/C (water-to-cement) and cement content.     

Advanced controller design based on gain and phase margin for microgrid containing PV/WTG/Fuel cell/Electrolyzer/BESS

Nowadays, with the increase in the amount of power generation related to renewable energy resources, the need for energy storage and management is raised. In this regard, the hydrogen energy plays a critical role in the development of renewable technologies. In view of the above, advanced controller design is presented in this paper to effectively perform load frequency control of islanded fuel cell microgrid based on the wind turbine, photovoltaic, fuel cell, electrolyzer, battery energy storage systems, and residential and commercial loads. The controller design is based on the determination of the controller parameters that the fuel cell microgrid system will provide the desired dynamic properties. In the proposed controller design, virtual gain and phase margin testers are added to provide the desired dynamic properties. The controller's stable parameter plane is determined with the help of the stability boundary locus method, taking into account time delay, gain, and phase margin. First, the accuracy of the stable parameter plane determined for the proposed controller design is demonstrated by means of time domain and eigenvalue analyzes. Finally, in order to show the performance of the advanced controller design and the success of the fuel cell as a backup generator, analysis studies have been carried out using actual data of solar and wind, and appropriate changes of load in studied microgrid.     

Magnetic field enhancement of electrochemical hydrogen evolution reaction probed by magneto-optics

External magnetic fields affect various electrochemical processes and can be used to enhance the efficiency of the electrochemical water splitting reaction. However, the driving forces behind this effect are poorly understood due to the analytical challenges of the available interface-sensitive techniques. Here, we present a set-up based on magneto- and electro-optical probing, which allows to juxtapose the magnetic properties of the electrode with the electrochemical current densities in situ at various applied potentials and magnetic fields. On the example of an archetypal hydrogen evolution catalyst, Pt (in a form of Co/Pt superlattice), we provide evidence that a magnetic field acts on the electrochemical double layer affecting the local concentration gradient of hydroxide ions, which simultaneously affects the magneto-optical and magnetocurrent response.     

Incremental gravitational search algorithm for high-dimensional benchmark functions

Neural Computing and Applications - In this study, gravitational search algorithm (GSA), which is a powerful optimization algorithm developed in recent years and based on physics, is improved by...     

The design of multiple feedback topology Chebyshev low-pass active filter with average differential evolution algorithm

Neural Computing and Applications - This study presents the design of a tenth-order multiple feedback Chebyshev low-pass filter (MF-C-LPF). Component selection and gain calculation of filters are...     

Multi carrier energy systems and energy hubs: Comprehensive review,survey and recommendations

In this paper, the multi carrier energy (MCE) systems are reviewed from different point of views including mathematical models, integrated components and technologies, uncertainty management, planning objectives, environmental pollution, resilience, and robustness. The basic of MCE systems is formed by combination of cooling, heating and power (CCHP). The natural gas and electricity are the main inputs to MCE systems and the cooling, heating, and electricity are the common outputs. The regular energy converters in the MCE systems are combined heat and power (CHP), gas boiler, absorption-electrical chillers, power to gas (P2G) and fuel-cell. The generic energy storages are electrical, heating, cooling, hydrogen, carbon dioxide (CO₂) and hydro systems.     

Enhancing stability region of time‐delayed smart power grids by non‐integer controllers

In this study, the impacts of non‐integer order controller on the stable parameter space of the microgrid (MG) frequency control system with fixed communication time delay are investigated and discussed with the help of the stability boundary locus (SBL) method. This study proposes a non‐integer order controller for the load frequency control (LFC) of the MG systems. To that end, the load frequency model of the MG is formulated and then the characteristic equations of this model are obtained. Then, with the help of this characteristic equation, the stable parameter space of the non‐integer controller is determined with regard to different time delay (τ ) and fractional integral order values (α ) using the SBL method. In order to show the accuracy of the obtained stable parameter space, time domain and generalized modified Mikhailov (GMM) criterion studies are carried out for different values of (τ ) and (α ). According to the results obtained, the areas of stable parameter space according to different α values and τ = 1.6 are calculated as 444.8860 for α = 0.4 , 342.9728 for α = 0.7 , 259.3578 for α = 1 , 216.2541 for α = 1.3 and 159.6826 for α = 1.6 . In addition, the areas of stable parameter space according to different τ values and α = 1.4 are calculated as 784.5222 for τ = 1 , 106.3219 for τ = 2 , 29.6959 for τ = 3 and 11.5946 for τ = 4 . Despite the extreme variability arising from nature of resources that make up the MG, the designed non integer order controller with the values selected within the stable parameter space stably carries out LFC control of the MG.