Ytterbium (III) oxide reinforced novel TeO2–B2O3–V2O5 glass system: Synthesis and optical,structural, physical and thermal properties

Different samples of xTeO₂.(25-y)B₂O₃.zV₂O₅.yYb₂O₃ (or TBVY) new glass material were synthesized by the classical melt-quenching method. Structural, optical, physical, and thermal analyses of the synthesized glasses were performed in addition to Monte Carlo simulation to test radiation shielding properties. The results showed that increasing ratios of Yb₂O₃ (y = 0.0, 0.5, 1.0, and 1.5 mol%) produced monotonic density values of the synthesized glasses ranging from 4.70058 g cm^?3 to 5.01038 g cm^?3. XRD and FTIR analyses were used to confirm the glass structure of all samples. Optical transmittance and absorption parameters varied almost monotonically with increasing ratios of Yb₂O₃ indicating the ability to predict and control these properties using Yb₂O₃ additive. Furthermore, simulated radiation interaction parameters, such as attenuation coefficients and half-value layer, exhibited well-behaved dependence on the concentration ratio of the Yb₂O₃ additive. This approach to glass material synthesis demonstrate the useful synergetic effect of combining structural, optical, and radiation characteristics.     

Optimized capacitive active ripple compensation topology for a 3.7 kW single-phase high power density on-board charger of electric vehicles

Electrical Engineering - In this paper, a comprehensive investigation of the capacitive active ripple compensation (ARC) techniques is made to conclude which one is optimal to be used in on-board...     

Birthweight and Lipids in Adult Life: Population-Based Cross Sectional Study

The purpose of this study was to examine the association of birthweight with lipid profile in the general adult population. Participants in the second-wave of a nationally representative cross sectional AusDiab-study were asked to complete a birthweight questionnaire. Fasting total cholesterol (TC), LDL-C, HDL-C, and triacylglycerol levels were modeled against birthweight. Four thousand five hundred and two people reported their birthweights, mean (SD) of 3.4(0.7) kg. Females with low birthweight-LBW had higher levels of TC, LDL-C, and triacylglycerols, but no difference in HDL-C, than those with normal-birthweight-NBW;≥2.5 kg. People with LBW showed a trend toward increased risk for high TC (≥5.5 mmol/L) compared to NBW. Among females with LBW, the risk for high LDL-C (≥3.5 mmol/L) was increased compared to those of NBW. The risk for low HDL-C (<0.9 mmol/L) was increased among males with LBW compared to those with NBW. Examination of the relationship on the continuum showed no differences except for high triacylglycerol levels among females with the lowest birthweight quintile compared to the higher birthweight quintile. However, the risk for various abnormalities by birthweight quintiles was similar to that when we used the traditional definition of LBW vs. NBW. Females and males with low birthweight differ in their risk for lipids abnormalities. Females had higher risk for high LDL-C, whereas males had high risk for low HDL-C (<0.9 mmol/L). In addition, females with low birthweight had the highest triacylglycerol levels. High LDL-C, low HDL-C, and high triacylglycerols are well-recognized risk factors for cardiovascular disease.     

Studies on mechanical and biodegradability properties of PVA/lignin blend films

The mechanical and biodegradation properties of polyvinyl alcohol/lignin blended films have been studied. The biodegradable composite films were developed by mechanical mixing followed by film casting method using poly (vinyl alcohol) (PVA), with lignin in different compositions. The progress of biodegradation was evidenced by means of the soil burial test. There was also an evaluation of the weight loss of the samples at the end of the biodegradation process. Blending the PVA with lignin improves tensile strength and the modulus of elasticity and causes a slight decrease in the elongation at break. The best tensile mechanical properties of a PVA/lignin blend were at ratio 2:30 where the tensile strength was 38 MPa, elastic modulus 83.22 MPa and elongation at break 213.9%. Blends of various PVA/lignin ratios have shown transparency, flexibility and good mechanical properties. Film composites also showed good biodegradability. The addition of lignin to the PVA matrix increases the degradation rate of the blends. The weight loss is affected by the composition of the blend, and by the nature of the microorganisms in the soil. PVA/lignin film may be potentially suitable as eco-friendly packaging materials.     

Physical modeling of behaviors of cast-in-place concrete piled raft compared to free-standing pile group in sand

Similar to free-standing pile groups, piled raft foundations are conventionally designed in which the piles carry the total load of structure and the raft bearing capacity is not taken into account. Numerous studies indicated that this method is too conservative. Only when the pile cap is elevated from the ground level, the raft bearing contribution can be neglected. In a piled raft foundation, pile–soil–raft interaction is complicated. Although several numerical studies have been carried out to analyze the behaviors of piled raft foundations, very few experimental studies are reported in the literature. The available laboratory studies mainly focused on steel piles. The present study aims to compare the behaviors of piled raft foundations with free-standing pile groups in sand, using laboratory physical models. Cast-in-place concrete piles and concrete raft are used for the tests. The tests are conducted on single pile, single pile in pile group, unpiled raft, free-standing pile group and piled raft foundation. We examine the effects of the number of piles, the pile installation method and the interaction between different components of foundation. The results indicate that the ultimate bearing capacity of the piled raft foundation is considerably higher than that of the free-standing pile group with the same number of piles. With installation of the single pile in the group, the pile bearing capacity and stiffness increase. Installation of the piles beneath the raft decreases the bearing capacity of the raft. When the raft bearing capacity is not included in the design process, the allowable bearing capacity of the piled raft is underestimated by more than 200%. This deviation intensifies with increasing spacing of the piles.     

Trajectory Analysis of Forest Cover Change in the Tropical Dry Forest of Burkina Faso,West Africa

Forest cover decline is one of the most important environmental issues in the tropics. The present study was carried out in Burkina Faso, West Africa, and aimed at assessing the trajectories of forest cover change and measuring landscape metrics of the trajectory classes in order to better understand the processes of change. Landsat and ASTER images acquired over a period of 30 years were used for cover change detection and the Fragstats package was used to compute landscape metrics with five unifying change classes. Results showed a substantial increase in cropland with concurrent decline in forest cover. Deforestation represented 63% of the Percentage of Landscape (PLAND) in 2006, while reforestation accounted for only 28%. Both of these classes had high Normalized Landscape Shape Index (NLSI) values, indicating that they were present as scattered small patches. The old cultivation (30-year permanent cropland) was aggregated (IJI ≈ 0) while deforestation exhibited highly interspersed patches. The old forest and old cultivation presented lower Area Weighted Fractal Dimension Index (FRAC_AM), but deforestation and reforestation had the higher FRAC_AM. These results confirmed that there was a high level of deforestation and fragmentation in southern Burkina Faso and justify the need for a proper management plan to ensure the sustainable use of forest resources.     

Synthesis of imidazo[2,1-b]thiazoles through the reaction of thiohydantoins and α-bromoketones

Imidazo-fused heterocycles are used as anticancer agents. In this study, some novel imidazo[2,1-b]thiazoles were synthesized from thiohydantoins and α-bromoketones in good yields. This method has the advantages of simple operation, high yields, and mild reaction conditions and uses less toxic and low-cost chemical reagents.     

LAS Detector with Soft-Output MMSE Initialization Under Imperfect Channel Estimation and Channel Correlation

Wireless Personal Communications - This paper proposes a modified likelihood ascent search (LAS) algorithm for multiple-input multiple-output (MIMO) systems under correlated channel and imperfect...     

Nano-structured zinc oxide–cotton fibers: synthesis, characterization and applications

Zinc oxide nanoparticles were prepared and subsequently deposited onto the surface of the cotton fiber by ultrasonic irradiation. The optical, structure and morphology of the coated and un-coated cotton were examined by UV, fourier transform infrared spectroscopy, X-ray diffraction analysis (XRD) and scanning electron microscope (SEM)/Energy Dispersive X-ray analysis. XRD analysis revealed the presence of the crystalline metal oxide of hexagonal phase with an average crystallite size of 12 nm. These nanoparticles are probably physically adsorbed onto the cotton fiber surface. SEM analysis showed a distribution of ZnO nanorod assemblies of various diameters and lengths physically adsorbed onto the cotton fiber surface may take place. The ZnO-cotton fiber nano-composite were tested against Escherichia coli (gram negative) and Staphylococcus aureus (gram positive) cultures, and showed a significant antimicrobial activity.     

Mechanisms of strength loss in underwater concrete

In-situ hardened properties of underwater concrete (UWC) are affected by washout loss and water infiltration occurring during the casting and post-casting stages. This paper evaluates the suitability of the falling-head method determined using a permeameter cell to assess water infiltration or, permeability (k), in freshly mixed UWC. Correlations between k and washout loss determined using the CRD C61 test method are established. The paper also seeks to quantify the coupled effect of washout loss and water infiltration on the drop in UWC compressive strength. Test results showed that Darcy’s law is valid to evaluate water permeability in UWC. The k and washout loss values are found to be well correlated within each other. UWC mixtures subjected to washout or water infiltration exhibited lower compressive strengths, as compared to reference concrete sampled in dry conditions. The drop in UWC strength was attributed to a combination of factors including washout loss of cementitious phase together with relative increases in aggregate concentration and specified water-to-cement ratio.