A thermal perspective of flash sintering: The effect of AC current ramp rate on microstructure evolution

In flash sintering experiments, the thermal history of the sample is key to understanding the mechanisms underlying densification rate and final properties. By combining robust temperature measurements with current-ramp-rate control, this study examined the effects of the thermal profile on the flash sintering of yttria-stabilized zirconia, with experiments ranging from a few seconds to several hours. The final density was maximized at slower heating rates, although processes slower than a certain threshold led to grain growth. The amount of grain growth observed was comparable to a similar conventional thermal process. The bulk electrical conductivity correlated with the maximum temperature and cooling rate. The only property that exhibited behavior that could not be attributed to solely the thermal profile was the grain boundary conductivity, which was consistently higher than conventional in flash sintered samples. These results suggest that, during flash sintering, athermal electric field effects are relegated to the grain boundary.     

The Interplay of Modulus,Strength, and Ductility in Adhesive Design Using Biomimetic Polymer Chemistry

High‐performance adhesives require mechanical properties tuned to demands of the surroundings. A mismatch in stiffness between substrate and adhesive leads to stress concentrations and fracture when the bonding is subjected to mechanical load. Balancing material strength versus ductility, as well as considering the relationship between adhesive modulus and substrate modulus, creates stronger joints. However, a detailed understanding of how these properties interplay is lacking. Here, a biomimetic terpolymer is altered systematically to identify regions of optimal bonding. Mechanical properties of these terpolymers are tailored by controlling the amount of a methyl methacrylate stiff monomer versus a similar monomer containing flexible poly(ethylene glycol) chains. Dopamine methacrylamide, the cross‐linking monomer, is a catechol moiety analogous to 3,4‐dihydroxyphenylalanine, a key component in the adhesive proteins of marine mussels. Bulk adhesion of this family of terpolymers is tested on metal and plastic substrates. Incorporating higher amounts of poly(ethylene glycol) into the terpolymer introduces flexibility and ductility. By taking a systematic approach to polymer design, the region in which material strength and ductility are balanced in relation to the substrate modulus is found, thereby yielding the most robust joints.     

An expert aid to fault diagnosis and trouble-shooting in satellitecommunications

Presents the Satellite Communications Network Expert (SaNE), a knowledge-based aid designed to provide engineering support for fault diagnosis. The SaNE is composed of two elements: a satcom network model, which simulates the structure and functionality of a system based loosely upon a large military satcom network, and a diagnostic component, which uses knowledge- and model-based reasoning techniques to analyse system anomalies and diagnose possible causes for the alarms such networks generate. The development cycle is described, emphasising lessons learnt during development and testing and the advantages and disadvantages of the techniques applied. The goal of the SaNE project is primarily commercial acceptance rather than innovation. The authors illustrate how novel concepts can be implemented in a practical system without compromising this goal     

Influence of interfacial microcracks on the elastic properties of composites

A model is established to quantify the influence of interfacial microcracks on the elastic properties of a particulate composite using a combination of theoretical and finite element analysis. A unique way to construct physical models which could accommodate both crack size and crack density is proposed. Based on energy principles, the influence of a dilute concentration of interfacial microcracks is first studied. The case of a finite concentration of microcracks is solved subsequently by combining the dilute concentration solutions and the differential scheme. Both cases agreed well with existing composite theories for the limiting condition of complete decohesion. The final model predicts the effective elastic properties as functions of both crack size and microcrack density.     

On upgrading the numerics in combustion chemistry codes

A method of updating and reusing legacy FORTRAN codes for combustion simulations is presented using the DAEPACK software package. The procedure is demonstrated on two codes that come with the CHEMKIN-II package, CONP and SENKIN, for the constant-pressure batch reactor simulation. Using DAEPACK generated code, analytical derivative calculations, sparsity pattern information, and hidden discontinuity information can be obtained for the models of interest. This information can be easily integrated with different solvers giving the modeler great flexibility in selecting the best solution procedure. Using the generated code, the CONP code was connected to three different solvers, and the SENKIN code was connected to two different solvers. The effect of model formulation, analytical derivatives, sparsity, and sensitivity equation solution method were analyzed for three large kinetic mechanisms for methane, acetylene, and n-heptane. For the n-heptane model, with 544 species and 2446 reactions, a factor of 10-speed improvement over the original solution procedure was found using analytical derivatives and sparse linear algebra. For sensitivity calculations, for a small number of parameters, a factor of 55 improvement over the original solution procedure was found for the n-heptane problem. Upon closer examination of results, no one method is found to always be superior to other methods, and selection of the appropriate solution procedure requires an examination of the specific kinetic mechanism, which is easily conducted using DAEPACK generated code.     

Analysis of polar compound classes in SRC-II liquids: Comparison of non-aqueous titrametric,i.r. spectrometric and h.p.l.c. methods

Results for various types of polar compounds in SRC-11 coal-derived liquids and other fuels were obtained by one or more of the three analytical methods: non-aqueous titration, i.r. spectroscopy and h.p.l.c. Practical aspects as well as precision, accuracy and assumptions necessary for effective application of each of the methods are discussed. H.p.l.c. is applicable to the widest variety of compound types, is the most rapid, most sensitive and shows the best promise for increased development and improvement. Application and development of these techniques is a logical step toward improving process monitoring, catalyst development, toxicological screening and general fuel analysis.     

ELECTRICALLY CONDUCTING GLASSES*

Glasses containing lead, bismuth, or antimony oxides or combinations of these become conducting after several hours’ reduction in hydrogen. The electronic surface conductivity is both stable and reproducible. The magnitude of the conductivity depends on the nature and amounts of the reducible oxides, the temperatures at which reduction is carried out, and the electrical influence of the nonreduced portions of the glasses.     

Second-order accurate constraint formulation for subdivision finite element simulation of thin shells

We present a new method for enforcing boundary conditions within subdivision finite element simulations of thin shells. The proposed framework is demonstrated to be second-order accurate with respect to increasing refinement in the displacement and energy norm for simply supported, clamped, free and symmetric boundary conditions. Second-order accuracy on the boundary is consistent with the accuracy of subdivision-based approaches for the interior of a body. Our proposed framework is applicable to both triangular and quadrilateral refinement schemes, and does not impose any topological requirements upon the underlying subdivision control mesh. Several examples from an obstacle course of benchmark problems are used to demonstrate the convergence of the scheme. Copyright © 2004 John Wiley & Sons, Ltd.     

Getting a handle on MATLAB graphics

Among engineers and scientists, MATLAB is one of the most popular computational packages. Part of MATLAB's popularity stems from its simple, yet sophisticated, graphics capabilities. While basic plots are relatively easy to obtain, specialized plots require a little more effort to produce. This article introduces MATLAB's Handle Graphics, which provides a mechanism to fully control and customize graphics objects in MATLAB. With a basic understanding of Handle Graphics, users can produce plots that meet the unique needs and quality standards commonly required by the profession, several examples are presented to illustrate the concepts.