Separation of Indium from Acid Sulfate-Containing Solutions by Ion Exchange with Impregnated Resins

Indium separation using ion exchange resins from acidic polymetallic and very diluted solutions are investigated. Since the selectivity of commercial ion exchange resins have proven to be too low for an effective separation from solutions with high content of other metals, Lewatit® TP 208 was impregnated with common extractants to enhance its properties. By resin impregnation with D2EHPA and Cyanex 272, not only the selective indium recovery was reached but also the resin capacity was increased approx. two times. The best loading and elution performance were shown by Cyanex 272-impregnated Lewatit® TP 208, increasing the indium purity in the eluate from 0.75 % to 85 %.     

Profiles of daily secretion of ACTH, beta-endorphins and cortisol in patients after minor craniocerebral trauma

In 12 men aged 20-25 men who had minor craniocerebral trauma the profiles of daily secretion of ACTH, beta-endorphin and cortisol were studied. The studies were carried out on the second day after the trauma. Plasma concentrations of the hormones were determined on 8.00, 12.00, 17.00 and 22.00 hours. Statistically significantly increased, in relation to healthy persons, (p < 0.01) values of plasma hormone concentration were found at all time points. In 50% of the patients (six cases) a disturbance was found of the profile of daily secretion of ACTH and beta-endorphin. The disturbance of the profile of cortisol secretion was found only in one patient.     

Optimization of ceramics bonding in the area of pressure sensor manufacturing

Ceramics joints are applied for producing products that should be made in a general shapes and dimensions for more advantageous usage. The article presents the research work related to ceramic joint quality evaluation, the thermal-structural analysis of ceramic joining and ceramic bond design and implementation. The role of ceramic material in the electronics industry and motivation for joining ceramics is described in the introduction. The requirements and methods for improving the quality of joints are summarized. Also, the results of simulations of pressure sensor cooling after removal from the oven during joining are discussed. The experimental results are evaluated by using a t-test before and after process cooling modification. Important directions for future research are summarized, with emphasis on the statistical determination of poor connection, and how the interface of modification of joint technology and process setting affects results and parameters that have been achieved.     

Characterisation of cut and chip behaviour for NR,SBR and BR compounds with an instrumented laboratory device

ABSTRACT

Understanding the cut and chip (CC) effect in rubber is important for successful product development for tires used in off-road or poor road conditions and for other demanding applications of rubber. This research describes a laboratory testing method for characterising the CC fracture behaviour of rubber using a device that controls and records multiple applied loads and displacements during cyclic impact to the surface of a solid rubber specimen to mimic and quantify the CC damage experienced by tire tread compounds. To study the capabilities of the instrument, three model compounds were studied that are based on carbon black reinforced compounds of common elastomers used in tire treads: natural rubber (NR), styrene-butadiene rubber (SBR), and butadiene rubber (BR). These polymers have well-established CC tendencies in field performance of tire treads, with NR exhibiting the best CC resistance followed by SBR and finally BR. The same trend was found with the rubber impact testing approach that allowed the CC behaviour to be quantified using a new physical parameter which is the CC propensity (P). The relative ranking for CC resistance for the three compounds followed the fatigue crack growth resistances of the materials but was exactly opposite to the ranking of DIN abrasion resistance. This provides evidence that CC damage from impact by mm-scale asperities and abrasion of rubber against μm-scale asperities exhibit distinct characteristics in rubber.     

Higher‐order extensions of a discontinuous Galerkin method for mid‐frequency Helmholtz problems

Recently, a discontinuous Galerkin method with plane wave basis functions and Lagrange multiplier degrees of freedom was proposed for the efficient solution of Helmholtz problems in the mid‐frequency regime. In this paper, this method is extended to higher‐order elements. Performance results obtained for various two‐dimensional problems highlight the advantages of these elements over classical higher‐order Galerkin elements such as Q₂ and Q₄ for the discretization of interior and exterior Helmholtz problems. Copyright © 2004 John Wiley & Sons, Ltd.     

The details matter: methodological nuances in the evaluation of student models

The core of student modeling research is about capturing the complex learning processes into an abstract mathematical model. The student modeling research, however, also involves important methodological aspects. Some of these aspects may seem like technical details not worth significant attention. However, the details matter. We discuss three important methodological issues in student modeling: the impact of data collection, the splitting of data into a training set and a test set, and the details concerning averaging in the computation of predictive accuracy metrics. We explicitly identify decisions involved in these steps, illustrate how these decisions can influence results of experiments, and discuss consequences for future research in student modeling.     

The two-regime method for optimizing stochastic reaction–diffusion simulations

Spatial organization and noise play an important role in molecular systems biology. In recent years, a number of software packages have been developed for stochastic spatio-temporal simulation, ranging from detailed molecular-based approaches to less detailed compartment-based simulations. Compartment-based approaches yield quick and accurate mesoscopic results, but lack the level of detail that is characteristic of the computationally intensive molecular-based models. Often microscopic detail is only required in a small region (e.g. close to the cell membrane). Currently, the best way to achieve microscopic detail is to use a resource-intensive simulation over the whole domain. We develop the two-regime method (TRM) in which a molecular-based algorithm is used where desired and a compartment-based approach is used elsewhere. We present easy-to-implement coupling conditions which ensure that the TRM results have the same accuracy as a detailed molecular-based model in the whole simulation domain. Therefore, the TRM combines strengths of previously developed stochastic reaction–diffusion software to efficiently explore the behaviour of biological models. Illustrative examples and the mathematical justification of the TRM are also presented.     

Comparison of Isolated Indentation and Grid Indentation Methods for HVOF Sprayed Cermets

This paper compares the results of two approaches of instrumented indentation for characterization of mechanical properties of HVOF coatings. Three types of HVOF sprayed coatings (Cr₃C₂-NiCr, WC-Co, (Ti, Mo)(C,N)-NiCo) were investigated by the means of isolated nanoindentation and grid indentation methods. The results of the isolated indentation revealed hardness and elastic modulus of the individual phases in very good agreement with the corresponding bulk material. The grid indentation method, based on statistical evaluation of a large number of indentations, was influenced by the carbide-matrix interface, which gave rise to a third peak apart from the two peaks corresponding to the carbides and metallic matrix. As a consequence, the bimodal Gaussian fit was insufficient and a trimodal fit had to be used. The results extracted from low load grid nanoindentations were quite close to the results of isolated indentations whereas higher load grid nanoindentation revealed overall properties of the coating.