Feasibility study of large-scale mass customization 3D printing framework system with a case study on Nanjing Happy Valley East Gate

At present, the development and implementation of digital transformation are the keys to promoting high-quality industry development. The new digital fabrication method of robotic 3D printing is a research area being studied by many to tackle the issue of the declining productivity of traditional construction methods. Although many studies have been done, most of the current 3D printing projects are facing limitations in terms of scale. In order to bridge the gap, this article proposed a mass customization 3D printing framework system for large-scale projects. This article discusses how mass customization is made possible through the joint operation of the FUROBOT software and 3D printing hardware. By taking the east gate of Nanjing Happy Valley Plaza as a case study, the article demonstrates and studies the feasibility of the large-scale mass customization 3D printing framework system.     

Nickel phosphonate MOF as efficient water splitting photocatalyst

A novel microporous two-dimensional(2D)Ni-based phosphonate metal-organic framework(MOF;denoted as IEF-13)has been successfully synthesized by a simple and green hydrothermal method and fully characterized using a combination of experimental and computational techniques.Structure resolution by single-crystal X-ray diffraction reveals that IEF-13 crystallizes in the triclinic space group Pi having bi-octahedra nickel nodes and a photo/electroactive tritopic phosphonate ligand.Remarkably,this material exhibits coordinatively unsaturated nickel(II)sites,free-P0₃H₂and-P0₃H acidic groups,a C0₂accessible microporosity,and an exceptional thermal and chemical stability.Further,its in-deep optoelectronic characterization evidences a photoresponse suitable for photocatalysis.In this sense,the photocatalytic activity for challenging H₂generation and overall water splitting in absence of any co-catalyst using UV-Vis irradiation and simulated sunlight has been evaluated,constituting the first report for a phosphonate-MOF photocatalyst.IEF-13 is able to produce up to 2,200 fimol of H₂per gram using methanol as sacrificial agent,exhibiting stability,maintaining its crystal structure and allowing its recycling.Even more,170μmol of H₂per gram were produced using IEF-13 as photocatalyst in the absence of any co-catalyst for the overall water splitting,being this reaction limited by the 0₂reduction.The present work opens new avenues for further optimization of the photocatalytic activity in this type of multifunctional materials.     

Strain rate dependency and fragmentation pattern of expanding warheads

For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.     

不同矿区天然隐晶质石墨对天然橡胶性能的影响

选用两种不同矿区的天然隐晶质石墨材料,经过超细粉体制备研磨后用于天然橡胶,探究了不同矿区隐晶质石墨在天然橡胶中的溶解度和对性能的影响并研究了粒径和混合工艺对天然橡胶性能的影响规律。研究表明,不同矿区隐晶质石墨因集合体构成不同,在橡胶中的溶解度差异较大；粒径大小是影响橡胶性能的关键参数；混合工艺对橡胶性能的影响更为明显。     

马来酸酐对聚酰胺6短纤维/天然橡胶复合材料的增容作用

将马来酸酐直接与天然橡胶混炼，得到的马来酸酐-天然橡胶接枝物既能与聚酰胺6短纤维也能与天然橡胶形成良好的结合，有助于提高短纤维增强橡胶复合材料的物理机械性能。     

实时GPS定位中的自适应故障检测

给出了一种GPS卡尔曼滤波的自适应方案,该方案能根据GPS导航中变化的动态来估计协方差.当增强卡尔曼滤波器时,方案可得到更精确的定位修正.此外,也可将此估计方法用于完整监测,以增强故障检测的阈值选择.采用模拟数据验证了提出方法的正确性.     

葡萄花油田开发技术经济界限研究

采用经济评价、预测分析、综合统计评价、等方法和手段,结合油田开发经验和历史数据资料,考虑采油时率、含水率、商品率、递减率、开发年限、投资贷款利率、还款期、成本上升率等一系列影响经济界限的开发和经济因素,建立了产量界限、成本界限、价格界限、投资界限模型及单井无效产量经济界限模型。对葡萄花油田开发过程中的各种经济界限进行评价,优化了成本结构、投资结构,为生产、决策提供依据。     

高线性模拟光耦HCNR201原理及其在检测电路中的应用

HCNR201是HP公司生产的高线性度模拟光电耦合器 ,它具有很高的线性度和灵敏度 ,可在检测系统中精确地传送电压信号。文中介绍了高线性度模拟光耦HCNR201的内部结构和工作原理 ,给出了用HCNR201和运算放大器实现检测电压的隔离传输电路。     

高性能纺织品整理方法及其应用

1　加工方法1 1　涂层纺织品的涂层可在多种设备上完成 ,其中最常用的是使用刮刀、辊筒、凹辊、粘辊和背辊。用于生产给定的最终产品时 ,每一种设备都有其优缺点 ,所以在选择时 ,我们应该对以下几点进行认真考虑 :纺织品的性质 ;涂层剂的流变性及其他性质 ;涂层剂是泡沫型的还是浆料型的 ;涂层剂在常温下还是在热熔条件下使用。另外 ,非常值得我们考虑的还有涂层剂的用量 ,以及涂层剂是用在织物的表面 ,还是尽量充满到织物结构内。所有这些都要由最终产品的性质及所要求具有的特种功能来确定。当前 ,除了涂层剂及织物的普通性能外 ,人们还…