超宽带大功率合成器设计北大核心CSCD

在80 MHz~1 GHz频段,单个功率管输出功率能达到100 W以上,为研制输出功率400 W的功率放大器,文中设计了四路功率合成器。该合成器需要实现功率容量大、工作频带宽、体积小的设计目标。在功率容量方面,文中采用悬置带状线结构,其功率容量远远大于微带线结构;在工作频带方面,采用切比雪夫九节阻抗变换器,将工作带宽拓宽为80 MHz~1 GHz;在体积方面,文中合成器的功率合成部分采用Y型节级联实现四路功率合成,阻抗变换部分采用切比雪夫阻抗变换器进行阻抗变换,该结构相较于磁环巴伦功率合成器,不但具有损耗小、平坦度高的优点,而且通过将阻抗变换器设计成曲折的形状,进一步缩小了合成器体积。仿真与实测结果显示该合成器在80 MHz~1 GHz范围内还具有较高的平坦度,合成效率可达90%以上。     

Flash Lamps as Ignition and Initiation Sources of the VS-2 Pyrotechnic Composition

In the present work it is found that the pyrotechnic composition VS-2 can be initiated with flash lamps IFC-500 and EVIS. VS-2 pyrotechnic composition contains 90% of mercury（Ⅱ） 5-hydrazinotetrazolate perchlorate and 10% of optically transparent copolymer of 2-methyl-5-vinyltetrazole and methacrylic acid （PVMT）. We have found that the flash lamps make it possible to initiate combustion of VS-2 composition with its transition to detonation both in cylindrical charges placed in brass caps of 5 mm diameter and 2 mm high， and film charges with 10 mm×80 mm in size and surface weights of 60 mg·cm^-2 and 90 mg·cm^-2， showing ignition delay times 10 μs and 3 μs， respectively. We also measured detonation velocities for VS-2 composition film charges， which were 4375-4505 m·s^-1 （of the charge being surface mass 60 mg·cm^-2） and 4221-4281 m·s^-1 （of the charge being surface mass 90 mg·cm^-2） and their blasting action on the aluminum plate. The depths of the normal shock wave imprints at the charge-barrier interface were 0.6-0.7 mm （for surface mass of the film charges 60 mg·cm^-2） and 1.2-1.3 mm （for surface mass of the film charges 90 mg·cm^-2）.     

BOWEN水力式外割刀性能影响因素研究

水力式外割刀在作业过程中易发生崩刃、磨损等失效,对施工安全构成威胁。为优选工艺参数,针对BOWEN公司水力式外割刀切削过程,建立了相应的有限元模型并选择合适的本构模型。使用有限元软件Deform-3D对水力式外割刀切割套管的过程进行了仿真。从后处理器中提取了割刀切削力、割刀刀尖磨损情况以及割刀刀片应力分布情况,并分析了刀尖圆角、切削转速对刀具应力的影响。并针对这些关键技术参数提出相关建议。     

分布式光伏发电站在汽车4S店项目运用的初探

汽车4S店的运营模式,决定4S店对电力能源需求的特点,满足此能源需求的不同特点,是建设方需要考虑、节约投资的一个环节。分布式光伏发电契合了这样的一个特点需求。     

Reduced texaphyrin: A ratiometric optical sensor for heavy metals in aqueous solution

We report here a water-soluble metal cation sensor system based on the as-prepared or reduced form of an expanded porphyrin, texaphyrin. Upon metal complexation, a change in the redox state of the ligand occurs that is accompanied by a color change from red to green. Although long employed for synthesis in organic media, we have now found that this complexation-driven redox behavior may be used to achieve the naked eye detectable colorimetric sensing of several number of less-common metal ions in aqueous media. Exposure to In(III), Hg(II), Cd(II), Mn(II), Bi(III), Co(II), and Pb(II) cations leads to a colorimetric response within 10 min. This process is selective for Hg(II) under conditions of competitive analysis. Furthermore, among the subset of response-producing cations, In(III) proved unique in giving rise to a ratiometric change in the ligand-based fluorescence features, including an overall increase in intensity. The cation selectivity observed in aqueous media stands in contrast to what is seen in organic solvents, where a wide range of texaphyrin metal complexes may be prepared. The formation of metal cation complexes under the present aqueous conditions was confirmed by reversed phase high-performance liquid chromatography, ultra-violet-visible absorption and fluorescence spectroscopies, and high-resolution mass spectrometry.     

A boronic acid-based fluorescent hydrogel for monosaccharide detection

A boronic acid-based anthracene fluorescent probe was functionalised with an acrylamide unit to incorporate into a hydrogel system for monosaccharide detection. In solution, the fluorescent probe displayed a strong fluorescence turn-on response upon exposure to fructose, and an expected trend in apparent binding constants, as judged by a fluorescence response where D-fructose>D-galactose>D-mannose>D-glucose. The hydrogel incorporating the boronic acid monomer demonstrated the ability to detect monosaccharides by fluorescence with the same overall trend as the monomer in solution with the addition of D-fructose resulting in a 10-fold enhancement (≤0.25 mol/L).     

AA7075高强铝合金热冲压流变行为本构模型对比研究

在热冲压过程中,AA7075高强铝合金板料经充分固溶后移入室温模具进行冲压成形并淬火。为表征AA7075铝合金在热冲压工艺中的变形行为,在温度200~480℃、应变速率0.01~10s-1范围内进行了高温拉伸试验。基于Arrhenius类型本构模型、Johnson-Cook模型以及Zerilli-Armstrong模型提出了多种修正本构模型,并应用实验所获流变曲线进行了拟合。提出的修正模型通过将模型参数表示为应变、应变速率及温度相关的多项式函数耦合了应变、应变速率及温度对流变应力的影响,并通过均方误差(MSE)以及相关系数R值对模型流变应力预测准确性进行了评价。结果表明,修正的Johnson-Cook模型能够更加准确的预测AA7075高温流变行为。     

滴施腐植酸肥和化肥对辣椒生产率的影响

正采用随机区组设计,在不添加腐植酸(单独施肥)和添加腐植酸(联合施肥)的条件下,以NPK推荐施肥量100%、80%和60%的3个施肥水平,研究了NPK滴灌对辣椒养分分配和生产率的影响。在较深的土层中,联合施肥能降低土壤速效N和K含量,提高土壤速效P含量。单独施肥的基础上联合施肥,辣椒产量提高了17%~27%。联合施肥的肥