Effects of a titanate coupling agent on the mechanical and thermo‐physical properties of talc‐reinforced polyethylene compounds

An experimental study was carried out to investigate the effects of a titanate coupling agent on the mechanical properties, moisture absorption, and thermal conductivity of talc‐filled high‐density polyethylene (HDPE). Talc (0–35 wt %) was used as reinforcement particulate filler in an HDPE matrix and samples were prepared in a micro‐compounder and an injection molding machine. Isopropyl tri(dioctyl)phosphate titanate (0.5 wt %) was used as coupling agent. Composites with and without coupling agent were evaluated for changes in mechanical and thermo‐physical properties, morphology, and void content. Addition of the titanate coupling agent most often resulted in an increase in stiffness and tensile strength. Furthermore, both the void content and the elongation at break of composites were reduced. Results also showed that the coupling agent had no effects on the thermal conductivity, thermal diffusivity, and specific heat capacity of the composites. In addition, it was observed that the coupling agent was more effective at low concentrations of filler. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40449.     

Mechanical and thermal characterization of compression moulded polylactic acid natural fiber composites reinforced with hemp and lyocell fibers

This research evaluates the effects of PLA/PP blend ratio and Lyocell/hemp mixture ratio on the morphology, water absorption, mechanical and thermal properties of PLA‐based composites. The composites were fabricated with 30 mass % hemp using compression moulding. As a reference composites made from PP were also studied. Combining of hemp and Lyocell in PLA composite leads to the reduction of moisture absorption and can improve the impact, tensile, flexural properties when compared with PLA/hemp. Composite based on the PLA/PP blend‐matrix could not improve the tensile and flexural properties compared with PLA/hemp, however; the lighter composite with better impact properties was obtained. The crystallization temperature of the PLA‐PP/hemp increased compared with pure PLA. This result was also confirmed by the SEM micrographs. The moisture absorption of PLA‐PP/hemp was higher than PLA/hemp. Based on theoretical analysis of DMTA data, there was favorable adhesion in all composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40534.     

Polyaniline–polypropylene melt‐spun fiber filaments: The collaborative effects of blending conditions and fiber draw ratios on the electrical properties of fiber filaments

A melt‐processable polyaniline complex was blended with polypropylene under different mixing conditions and melt‐spun into fiber filaments under different draw ratios. The conductivity, electrical resistance at different voltages, and morphological characteristics of the prepared fibers were investigated. The morphology of this two‐phase blend was demonstrated to have a large effect on the conductivity level and the linearity of the resistance–voltage relationship of the blend fibers. Two factors had substantial effects on the morphology and electrical properties of the fibers. They were the size of the initial dispersed conductive phase, which depended on the melt blending conditions, and the stress applied to orient this phase to a fibril‐like morphology, which was controlled by the draw ratio of the fiber. The two factors were shown to be associated with each other to maintain an appropriate balance of fibril formation and breakage and to create continuous conductive pathways. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Melt blending of carbon nanotubes/polyaniline/polypropylene compounds and their melt spinning to conductive fibres

Blends of polypropylene with polyaniline and multi-walled carbon nanotubes have been prepared and melt spun to fibre filaments. The resulted filaments have been characterised regarding conductivity, morphology, thermal and mechanical properties. DSC suggests that carbon nanotubes act as nucleating sites for PP/polyaniline blend. Electrical conductivity has been measured for blends with extruded rod shape, as-spun fibre filaments and fibres made under draw ratio of four. Polypropylene containing 20 wt% polyaniline polymer modified with 7.5 wt% carbon nanotubes shows the maximum conductivity among all the samples, about 0.16 S/cm.     

Biobased composites prepared by compression molding with a novel thermoset resin from soybean oil and a natural‐fiber reinforcement

Biobased composites were manufactured with a compression‐molding technique. Novel thermoset resins from soybean oil were used as a matrix, and flax fibers were used as reinforcements. The air‐laid fibers were stacked randomly, the woven fabrics were stacked crosswise (0/90°), and impregnation was performed manually. The fiber/resin ratio was 60 : 40. The prepared biobased composites were characterized by impact and flexural testing. Scanning electron microscopy of knife‐cut cross sections of the specimens was also done to investigate the fiber–matrix interface. Thermogravimetric analysis of the composites was carried out to provide indications of thermal stability. Three resins from soybean oil [methacrylated soybean oil, methacrylic anhydride modified soybean oil (MMSO), and acetic anhydride modified soybean oil] were used as matrices. The impact strength of the composites with MMSO resin reinforced with air‐laid flax fibers was 24 kJ/m², whereas that of the MMSO resin reinforced with woven flax fabric was between 24 and 29 kJ/m². The flexural strength of the MMSO resin reinforced with air‐laid flax fibers was between 83 and 118 MPa, and the flexural modulus was between 4 and 6 GPa, whereas the flexural strength of the MMSO resin reinforced with woven fabric was between 90 and 110 MPa, and the flexural modulus was between 4.87 and 6.1 GPa. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermoset lactic acid‐based resin as a matrix for flax fibers

Thermoset composites were produced from flax fibers and a novel lactic acid (LA)‐based thermoset resin. This resin is based on methacrylated, star‐shaped oligomers of LA. The main purpose of this work was to evaluate whether this resin can be used to produce structural composites from flax fibers. Composites were prepared by spray impregnation followed by compression molding at elevated temperature. The tests showed that composites can be produced with as much as 70 wt% fiber. The composites were evaluated by tensile testing, flexural testing, charpy impact test, dynamic mechanical thermal analysis (DMTA), and low‐vacuum scanning electron microscopy. The ageing properties in high humid conditions were evaluated, the Young's modulus ranged from 3 GPa to 9 GPa in the best case. This work shows that structural composites can be produced from renewable material. It is clear from the results that these composites have properties that make them suitable for furniture, panels, or automotive parts. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Unsaturated para-linked aromatic LC polyesters: Thermotropic and lyotropic systems

Liquid-crystalline thermosets (LCT) are a new class of materials which combine typical properties of LC polymers with those of conventional thermosets. This article reports on the development of a lyotropic LC thermoset (LLCT) in which the solvent is a vinyl monomer. Such an LLCT is expected to have several advantages compared to conventional unsaturated polyester resins. The synthesis and characterization of a variety of novel substituted para-linked aromatic polyesters and copolyesters containing unsaturated fumaroyl units is presented. The thermal and liquid crystal properties were investigated. It is demonstrated that it is possible to prepare a lyotropic LC solution in styrene. These lyotropic solutions are capable of thermal crosslinking by the addition of a free-radical initiator. © 1995 John Wiley & Sons, Inc.     

Thermo-mechanical properties of polyethylene composites filled with soapstone waste

In this study, soapstone waste originated from craftsmanship activities was used as an alternative filler (0–30 wt%) for a high-density polyethylene (PE) matrix. The aim of this paper is to understand the effect of the filler particles on crystallinity, thermal stability and thermo-mechanical properties of this newly developed composite material. Physico-chemical characterization was performed by x-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy. Thermogravimetric analysis (TGA), oxidation induction time (OIT) and dynamic mechanical thermal analysis (DMA) were performed to assess the effect of the filler on the themo-mechanical properties of PE. Thermal stability, measured by TGA, was enhanced, while OIT values reduced with filler content. A significant increase on the storage modulus of the composites (up to 148% in comparison with unfilled PE) was observed and this reinforcing effect was even more prominent at higher temperatures. XRD analysis revealed that the degree of crystallinity improved significantly with soapstone loading, which explains the substantial increase in stiffness observed. Increased crystallinity is also associated with higher strength, reduced residual stress, and better dimensional stability of end products, which can be particularly attractive for pressure pipe applications.     

Preparation of thermoset composites from natural fibres and acrylate modified soybean oil resins

Structural composites with a high content of renewable material were produced from natural fibres and an acrylated epoxidized soybean oil resin. Composites were prepared by spray impregnation followed by compression moulding at elevated temperature. The resulting composites had good mechanical properties in terms of tensile strength and flexural strength. Tensile testing as well as dynamical mechanical thermal analysis showed that increasing the fibre content, increased the mechanical properties. The resin can be reinforced with up to 70 wt % fibre without sacrifice in processability. The tensile modulus ranged between 5.8 and 9.7 GPa depending on the type of fibre mat. The study of the adhesion by low vacuum scanning electron microscopy shows that the fibres are well impregnated in the matrix. The aging properties were finally evaluated. This study shows that composites with a very high content of renewable constituents can be produced from soy bean oil resins and natural fibres. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Ash-forming elements in four Scandinavian wood species. Part 1: Summer harvest

Woody biomass in Finland and Sweden comprises mainly four wood species: spruce, pine, birch and aspen. To study the ash, which may cause problems for the combustion device, one tree of each species were cut down and prepared for comparisons with fuel samples. Well-defined samples of wood, bark and foliage were analyzed on 11 ash-forming elements: Si, Al, Fe, Ca, Mg, Mn, Na, K, P, S and Cl. The ash content in the wood tissues (0.2–0.7%) was low compared to the ash content in the bark tissues (1.9–6.4%) and the foliage (2.4–7.7%). The woods’ content of ash-forming elements was consequently low; the highest contents were of Ca (410–1340 ppm) and K (200–1310), followed by Mg (70–290), Mn (15–240) and P (0–350). Present in the wood was also Si (50–190), S (50–200) and Cl (30–110). The bark tissues showed much higher element contents; Ca (4800–19,100 ppm) and K (1600–6400) were the dominating elements, followed by Mg (210–2400), P (210–1200), Mn (110–1100) and S (310–750), but the Cl contents (40–330) were only moderately higher in the bark than in the wood. The young foliage (shoots and deciduous leaves) had the highest K (7100–25,000 ppm), P (1600–5300) and S (1100–2600) contents of all tissues, while the shoots of spruce had the highest Cl contents (820–1360) and its needles the highest Si content (5000–11,300). This paper presented a new approach in fuel characterization: the method excludes the presence of impurities, and focus on different categories of plant tissues. This made it possible to discuss the contents of ash element in a wide spectrum of fuel-types, which are of large importance for the energy production in Finland and Sweden.