An embedded FPGA-SoC framework and its usage in moving object tracking application

Design Automation for Embedded Systems - Moving object tracking is a computation-intensive operation that requires accelerating hardware solution. In this work, a high-performance design for mean...     

Detecting DDoS Attacks in Cloud Computing Using Extreme Learning Machine and Adaptive Differential Evolution

Wireless Personal Communications - Distributed denial of service (DDoS) attacks disrupt the availability of cloud services. The detection of these attacks is a major challenge in the cloud...     

Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.     

Modulated gravity effects on nonlinear convection in viscoelastic ferromagnetic fluids between two horizontal parallel plates

In this study, the analysis of nonlinear stability with viscoelastic ferromagnetic fluids as working media is performed by finite-amplitude perturbations. The solution of the resulting nonautonomous system of the Lorenz model (generalized Khayat–Lorenz model of four modes) is obtained numerically to measure the amount of heat transport. The effects of elastic parameters, Prandtl number, modulation parameters, buoyancy magnetic parameter, and nonbuoyancy magnetic parameter on heat transport are studied. Heat transport is quantified through the average Nusselt number, which is determined by solving the scaled Lorenz model. As limiting cases of the study, the results of Newtonian, Maxwell, Rivlin–Ericksen fluids are determined. The results obtained have been presented graphically.     

Ionic liquid-based deep eutectic solvents as novel solvent-cum-catalyst media for thermal dehydrogenation of chemical hydrides

The current work explores the usage of novel synthesized Deep Eutectic Solvent (DES) as a catalyst cum solvent media for the thermal dehydrogenation of chemical hydrides, namely Ammonia Borane (AB) and Ethylene diamine bisborane (EDAB). In the first instance, the quantum chemistry based COSMO-SAC (COnductor like Screening MOdel Segment Activity Coefficient) model was used for the selection of the pertinent solvent. 1-Butyl-3-methylimidazolium methanesulfonate: Imidazole ([BMIM][MeSO₃]:[Im]) turned out to be an ideal eutectic mixture with the highest predicted solubility with amine boranes. The DES was synthesized by combining the Hydrogen Bond Acceptor (HBA), namely 1-Butyl-3-methylimidazolium methanesulfonate and Imidazole as Hydrogen Bond Donor (HBD) at a molar ratio of 1:2 and T = 70 °C. The formation of DES was confirmed by recording the NMR spectra. Further, the thermal dehydrogenation study was performed at a vacuum of 4 × 10^?2 mbar (gauge pressure) of AB/DES and EDAB/DES systems at 105 °C, where a hydrogen equivalent of 1.40 and 2.55 was produced, respectively. The residual samples were further analyzed through ¹H NMR analysis for the reaction mechanism and to confirm the role of Ionic Liquid-based DES as catalyst cum solvent media.     

Mannopyranoside Glycolipids Inhibit Mycobacterial and Biofilm Growth and Potentiate Isoniazid Inhibition Activities in M. smegmatis

Lipomannan and lipoarabinomannan are integral components of the mycobacterial cell wall. Earlier studies demonstrated that synthetic arabinan and arabinomannan glycolipids acted as inhibitors of mycobacterial growth, in addition to exhibiting inhibitory activities of mycobacterial biofilm. Herein, it is demonstrated that synthetic mannan glycolipids are better inhibitors of mycobacterial growth, whereas lipoarabinomannan has a higher inhibition efficiency to biofilm. Syntheses of mannan glycolipids with a graded number of mannan moieties and an arabinomannan glycolipid are conducted by chemical methods and subsequent mycobacterial growth and biofilm inhibition studies are conducted on Mycobacterium smegmatis. Growth inhibition of (73±3) % is observed with a mannose trisaccharide containing a glycolipid, whereas this glycolipid did not promote biofilm inhibition activity better than that of arabinomannan glycolipid. The antibiotic supplementation activities of glycolipids on growth and biofilm inhibitions are evaluated. Increases in growth and biofilm inhibitions are observed if the antibiotic is supplemented with glycolipids, which leads to a significant reduction of inhibition concentrations of the antibiotic.     

Comparison of the dynamic responses of monopiles and gravity base foundations for offshore wind turbines in sand using centrifuge modelling

Monopiles and gravity base foundations (GBF) are two of the most commonly used foundations for offshore wind turbines. As resonance can cause damage and even failure of wind turbines, understanding the difference between the dynamic responses of monopiles and GBFs under free vibration is important. However there is little experimental data regarding their natural frequency, especially from model tests carried out at correct stress levels. This paper presents the results of novel monopile and GBF tests using a centrifuge to directly determine the natural frequency (f_n) of the foundation-soil system. The natural frequencies of wind turbine monopiles and GBFs in centrifuge models were measured during harmonic loading using a piezo-actuator, with the results confirming that soil-structure interaction must be considered to obtain the system’s natural frequency as this frequency reduces substantially from fixed-base values. These results will contribute in preventing resonance induced damage in wind-turbines.     

TiO2 nano-flakes with high activity obtained from phosphorus doped TiO2 nanoparticles by hydrothermal method

TiO₂ nano-wires (Ti-NWs) and nano-flakes (Ti-NFs) were obtained from phosphorus doped TiO₂ nanoparticles (Ti-P) by hydrothermal method and by subsequent heat treatment respectively. FE-SEM micrograph of the as prepared sample depicts well formed, entangled and randomly oriented nano-wires morphology, which changes to nano-flakes morphology after heat treatment. Structural characterization of the samples by X-ray diffraction shows anatase phase for both the samples. Absorption edge of the Ti-NWs sample shows blueshift where as the Ti-NFs sample exhibit redshift compared to precursor sample as evidenced by UV–Visible absorption spectra, which is due to change in morphology and crystallinity of the samples. XPS studies indicate the presence of titanium and oxygen species only. From the EPR measurements with in-situ visible light irradiation, the number of photogenerated charge carriers is found to be very high for nano-flakes sample. Methyleneblue degradation profiles depict very high activity of Ti-NFs sample compared to Ti-NWs and the precursor samples, which is due to the observed redshift in the absorption edge, change in morphology and high crystallinity of the sample which in turn increases the optical response and separation of photogenerated charge carriers as evidenced by the optical and EPR measurements respectively.