Colloidal silica removal in coagulation processes for wastewater reuse in a high-tech industrial park.

Four experiments of coagulation and flocculation were conducted to investigate the characteristics of colloidal silica removal in a high-tech industrial wastewater treatment plant for reclamation and reuse of the effluent. Experimental results illustrated that poly-aluminium chloride (PACl) showed higher performances on colloidal silica removal than alum. Interestingly, the two coagulants demonstrated the same capacity on silica removal. The specific silica removal capacity was approximately 0.135 mg SiO2/mg Al2O3 when the dosage of coagulants was in the range 30-150 mg/L Al2O3. In addition, the silica was reduced significantly at the condition of pH above 8. Experimental data implied that precipitation of aluminium flocs was the major mechanism for colloid silica removal in PACl and alum coagulation, besides, charge adsorption was also important for improving removal efficiency. Moreover, the addition of polyacrylic acid (PAA) as a flocculant could slightly advance silica removal in the PACl coagulation. The combined PACl/PAA/flocs coagulation was effective for the removal of colloidal silica, soluble COD, and turbidity and also suitable as a pretreatment unit in wastewater reclamation and reuse processes.     

Non-contact flood discharge measurements using an X-band pulse radar (I) theory

This article describes a non-contact method for measuring surface velocity and discharge in a natural channel. The X-band pulse (9.36 GHz) radar, developed by the Applied Physics Laboratory of the University of Washington, was used to scan instantaneously the lateral distribution of surface velocity across a river section, according to Bragg scattering from short waves produced by turbulent boils on the surface of the river. Based on the assumption that the vertical velocity distribution follows a universal power or logarithmic law, the discharges were estimated.     

Silicon Valley Policy

Silicon Valley is hom e to the m ostdynam ic industries in the C aliforniaeconom y .These industries —— thehigh-tech sector—— are driven by in-novation,and each new wave of inno-vation is usually led by cre ativeentrepreneurs starting new firm s.D uri…     

Two new characteristic parameters for runoff computation

A method capable of estimating the hydrograph from a prescribed storm for a practical mild slope upstream catchment is proposed. This method makes use of two new characteristic parameters, andS, in conjunction with the kinematic wave equation to compute lateral inflows of the main stream of the catchment. The depth profile of overland flow at any instant within the catchment and hydrograph at any location can be easily found. Lag times for individual lateral inflows are then considered and are linearly combined to obtain the hydrograph at the outlet of the catchment or depth profile of the main stream at any instant. The validity of the excess rainfall-surface runoff linear relationship in this study has also been verified with Tatsunokuchiyama catchment, and it shows good results for this computed runoff.     

In Vitro Characterization of Neutralizing Hen Antibodies to Coxsackievirus A16

Coxsackievirus A16 (CA16) is one of the major causative agents of hand, foot, and mouth disease (HFMD). Children aged <5 years are the most affected by CA16 HFMD globally. Although clinical symptoms of CA16 infections are usually mild, severe complications, such as aseptic meningitis or even death, have been recorded. Currently, no vaccine or antiviral therapy for CA16 infection exists. Single-chain variable fragment (scFv) antibodies significantly inhibit viral infection and could be a potential treatment for controlling the infection. In this study, scFv phage display libraries were constructed from splenocytes of a laying hen immunized with CA16-infected lysate. The pComb3X vector containing the scFv genes was introduced into ER2738 Escherichia coli and rescued by helper phages to express scFv molecules. After screening with five cycles of bio-panning, an effective scFv antibody showing favorable binding activity to proteins in CA16-infected lysate on ELISA plates was selected. Importantly, the selected scFv clone showed a neutralizing capability against the CA16 virus and cross-reacted with viral proteins in EV71-infected lysate. Intriguingly, polyclonal IgY antibody not only showed binding specificity against proteins in CA16-infected lysate but also showed significant neutralization activities. Nevertheless, IgY-binding protein did not cross-react with proteins in EV71-infected lysate. These results suggest that the IgY- and scFv-binding protein antibodies provide protection against CA16 viral infection in in vitro assays and may be potential candidates for treating CA16 infection in vulnerable young children.     

Effect of Particle-Size Distribution on the Microstructural Evolution in the Intermediate Stage of Sintering

The effect of particle-size distribution on microstructural evolution in the intermediate stage of sintering of powder compacts was investigated. The evolution of pore channels was dominated by particle-size distribution but independent of sintering temperature. Moreover, a powder compact with a fine particle and uniform size distribution could prolong the intermediate stage of sintering, which in turn effectively inhibited grain growth. The mechanisms of evolution and pinch off of the pore channels of the powder compact with different particle-size distributions were discussed.     

A PROCEDURE FOR EVALUATION OF COMMERCIAL FCC CATALYSTS

Based on the correlations between laboratory units and commercial plants, a procedure has been developed to guide commercial FCC (Fluid Catalytic Cracking) catalysts selection. Examining the operability of catalyst mixtures during catalyst transition period is emphasized. The testing procedure is simple and reliable. A commercially available catalyst and the catalyst currently in use have been compared to demonstrate the applicability of this procedure. The commercial testing has confirmed the reliability of laboratory results. The use of the catalyst evaluated led to a 30% saving in catalyst cost.     

Łukasiewicz logic and Riesz spaces

We initiate a deep study of Riesz MV-algebras which are MV-algebras endowed with a scalar multiplication with scalars from \([0,1]\) . Extending Mundici’s equivalence between MV-algebras and \(\ell \) -groups, we prove that Riesz MV-algebras are categorically equivalent to unit intervals in Riesz spaces with strong unit. Moreover, the subclass of norm-complete Riesz MV-algebras is equivalent to the class of commutative unital C \(^*\) -algebras. The propositional calculus \({\mathbb R}{\mathcal L}\) that has Riesz MV-algebras as models is a conservative extension of ?ukasiewicz \(\infty \) -valued propositional calculus and is complete with respect to evaluations in the standard model \([0,1]\) . We prove a normal form theorem for this logic, extending McNaughton theorem for ? ukasiewicz logic. We define the notions of quasi-linear combination and quasi-linear span for formulas in \({\mathbb R}{\mathcal L},\) and relate them with the analogue of de Finetti’s coherence criterion for \({\mathbb R}{\mathcal L}\) .     

面向图像场景转换的改进型生成对抗网络

设计了新的生成器网络、判决器网络以及新的损失函数,用于图像场景转换.首先,生成器网络采用了带跨层连接结构的深度卷积神经网络,其中,多个跨层连接以实现图像结构信息的共享;而判决器网络采用了多尺度全域卷积网络,多尺度判决器可以区分不同尺寸下的真实和生成图像.同时,对于损失函数,该算法借鉴其他算法提出了4种损失函数的组合,并通过实验对比证明了新损失函数的有效性,包括GAN损失、L₁损失、VGG损失、FM损失.从实验结果显示,该算法能够实现多种转换,且转换后图像的细节保留较为完整,生成图像较为真实,明显消除了块效应.     

Toughening of epoxy thermosets with nano-sized or micron-sized domains of poly(ethylene oxide)-b-poly(butadiene-co-acrylonitrile)-b-poly(ethylene oxide) triblock copolymers synthesized using room temperature ester coupling reaction

Poly(ethylene oxide)-b-poly(butadiene-co-acrylonitrile)-b-poly(ethylene oxide) (PEO-b-PBN-b–PEO) triblock copolymers with three different compositions were synthesized from poly(ethylene glycol) methyl ethers and carboxylic acid-terminated poly(butadiene-co-acrylonitrile) (CTBN) by ester coupling reaction at room temperature. The PEO-b-PBN-b-PEO was incorporated into anhydride cured epoxy thermosets to improve the fracture toughness by the formation of either nano-sized spherical micelles or micron-sized vesicles. The polymer chemical structure was confirmed by Fourier transform infrared spectroscopy, nuclear magnetic resonance, and gel permeation chromatography. The morphology of PEO-b-PBN-b–PEO within the epoxy thermosets was investigated using a transmission electron microscope, an atomic force microscope, and a scanning electron microscope. Also, we conducted impact testing and plane-strain fracture toughness testing to evaluate the fracture toughness in terms of the impact strength and the critical stress intensity factors (K_IC) for the modified epoxy thermosets. The results revealed that all the PEO-b-PBN-b-PEO triblock copolymers are more effective in the toughening of epoxy thermoset compare to CTBN. We found that the 5 wt% PEO-b-PBN-b-PEO modified epoxy thermoset containing micron-sized vesicles exhibited the highest K_IC, which was 3.23 times as high as the K_IC of pristine epoxy thermoset. Besides, the glass transition temperature remained and the tensile modulus did not reduce remarkably when the amount of PEO-b-PBN-b-PEO added into epoxy was 5 wt%.