Micro-computerized tomographic observation of the spinning apparatus in Bombyx mori silkworms

Silkworms and spiders have evolved complex spinning apparatus thought to use highly controlled conditions to optimize protein folding and crystallization to provide a tough fiber. Accordingly, the structure and function of the natural spinning apparatus has been studied with great attention as an interesting piece of biological engineering with potential for mimicry in an industrial process. However it is still not well understood. Here we used Micro-Computerized Tomographic equipment (mCT) to visualize the three-dimensional structure of the spinning apparatus in Bombyx mori silkworms. Multidirectional tomograms obtained by X-ray radioscopy provided valuable information on the detailed arrangement of each muscle of the silk press. It is suggested that the duct in the silk press part plays a part as an extrusion die whose cross-sectional area can be controlled by muscles to optimize applied stresses in the partially gelled silk within its lumen.     

A polar coordinate integration scheme with a hierachical correction procedure to improve numerical accuracy on the boundary element method

In order to calculate accurate physical values of interior region by the boundary element method, a new approach is proposed to singular kernel integration which is applicable to general isoparametric elements and never fails, no matter where the internal point under consideration may be located. The integration scheme consists of two parts.First, the singular kernel functions are assumed to be reciprocal of the distance types. Then the present scheme describes on the quadrate boundary element. The element is subdivided into four triangular regions for which Gauss-Legendre numerical quadrature is applied.Secondly, a method is proposed to reduce residual errors in the application of the above mentioned numerical scheme. The boundary integrals to calculate interior physical values are expressed formally with exact and numerical error terms, and boundary values in error terms are expanded by a Taylor series around the interior point. To evaluate the coefficient of each derivative in the series, a boundary integral form of an identity with respect to a vector from the interior point to the boundary surface is derived. Error resulting from numerical integration of the identity is found to coincide with the coefficient of the derivative in the Taylor series. Thus, the correction factor for numerical errors is obtained.The present scheme was verified to be quite effective such that both the numerical error and CPU time became 1/100 less than those by the double exponential quadrature. Moreover, the present numerical scheme is applicable to general curved elements.     

高质量密度储氢材料-氨基化合物的合成

采用真空蒸发法制备了氨基化锂LiNH2(+2·LiH)薄膜,即首先将Li真空镀膜到金属基板上,然后经氮化、氢化处理合成LiNH2薄膜.此外,真空蒸发法也用于Mg部分置换Li后薄膜的制备.实验结果证明,与传统的粉末状试样相比,薄膜状试样能够在更低的温度下释放出氢气.研究表明采用包括真空蒸发法等非传统方法合成金属络合物储氢材料对进一步提高其储放氢特性具有良好的效果.     

Synthesis of New Pb-Based 1222 Cuprates Containing Phosphorus, (Pb0.75P0.25)Sr2(RE2–x–y Ce x Sr y )Cu2O z (RE = Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Y)

New Pb-based 1222 cuprates containing phosphorus have been synthesized in the (Pb_0.75P_0.25)Sr₂- (RE_2–x–y Ce _x Sr _y )Cu₂O _z (RE = Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Y) systems. The almost-single phase samples are obtained for 0.5≤x≤1.0 and y=0.1 in the cases of RE = Nd, Dy, Ho, Er, Tm, Yb and Y, while for 0.3≤x≤1.0 and y=0.1 in the cases of RE = Sm, Eu and Gd. The samples crystallize in a tetragonal lattice, the lattice parameters a and c are decreasing with the decrease of the ionic radius of the RE element. Even after annealing under 143 atm O₂ atmosphere at 400 °C, almost all the samples with the common values x=0.5 and y=0.1 are semiconductors with a transport process followed by three-dimensional variable range hopping. However, the samples of RE = Sm, Eu and Gd, which are of almost single 1222 phase, even for x=0.3 and y=0.1, show superconductivity with the onsets at about 25 K, 20 K and 22 K, respectively. Through this study, we find very important procedure for discovery of new superconducting 1222 compound.     

Generation of disk-like domains with nanometer scale thickness in merocyanine dye LB film induced by hydrothermal treatment

We have characterized the binary LB films of merocyanine dye (MS) and arachidic acid (C₂₀) before and after hydrothermal treatment (HTT), which is defined as a heat treatment under relative humidity of 100%, focusing on the morphology studied by bright field (BF) microscopy and fluorescence (FL) microscopy. BF microscopy observation has revealed that the as-deposited MS-C₂₀ binary LB film is found to emit intense red fluorescence over the whole film area by 540-nm excitation. Since the surface image is almost featureless, it is considered that the crystallite sizes of J-aggregate are less than 10 μm. Interestingly, after HTT, round-shaped domains are observed in the LB systems, and the sizes are reaching 100 μm in diameter. Crystallites of J-aggregate, which are bluish in color and emit intense red fluorescence, tend to be in the round domains. We have observed two different types of domains, i.e., blue-rimmed domains and white-rimmed domains, which are postulated to be confined in the inner layers and located at the outermost layer, respectively. The thickness of the domains is equal to or less than that of the double layer of the MS-C₂₀ mixed LB film, which is ca. 5.52 nm. The molecular order of MS in the J-aggregate is improved by the HTT process leading to the significant sharpening of the band shape together with the further red shift of the band (from 590 to 594 nm up to 597 to 599 nm). The reorganized J-band is considered to be ‘apparently’ isotropic owing to the random growth of the J-aggregate in the film plane. We consider that the lubrication effect by the presence of water molecules predominates in the HTT process.     

Nusselt number correlations for a microchannel heat exchanger hot water supplier with S-shaped fins

Using 3D-CFD code, Nusselt number correlations for a microchannel heat exchanger (MCHE) with S-shaped fins used for hot water suppliers are obtained through numerical experiments and then validated. The supercritical carbon dioxide working fluid is assumed to operate around the pseudo-critical point, where fluid properties change radically. Calculations with 20 different temperatures are executed to produce Nusselt number correlations for each side. The fluid inlet temperature in each calculation is defined as 2 °C lower or higher than the constant wall temperature, respectively, for cold and hot side simulations. The small temperature difference of 2 °C is sufficiently small to regard thermal–hydraulic properties as constant. A new integrating method using the correlations to calculate the heat-transfer-performance is proposed. The resultant heat-transfer-performance is compared with that of another numerical result, which is reduced from large geometry and integration. The results agree within 3% error; the calculation accuracy of the method is confirmed. Experimental results with MCHE verify the correlations. The difference is approximately 5%. Using few computer resources, these Nusselt number correlations and the heat-transfer-performance calculation methods using correlation information are sufficiently accurate to evaluate heat exchangers.     

Trading variance reduction with unbiasedness: the regularized subspace information criterion for robust model selection in kernel regression

A well-known result by Stein (1956) shows that in particular situations, biased estimators can yield better parameter estimates than their generally preferred unbiased counterparts. This letter follows the same spirit, as we will stabilize the unbiased generalization error estimates by regularization and finally obtain more robust model selection criteria for learning. We trade a small bias against a larger variance reduction, which has the beneficial effect of being more precise on a single training set. We focus on the subspace information criterion (SIC), which is an unbiased estimator of the expected generalization error measured by the reproducing kernel Hilbert space norm. SIC can be applied to the kernel regression, and it was shown in earlier experiments that a small regularization of SIC has a stabilization effect. However, it remained open how to appropriately determine the degree of regularization in SIC. In this article, we derive an unbiased estimator of the expected squared error, between SIC and the expected generalization error and propose determining the degree of regularization of SIC such that the estimator of the expected squared error is minimized. Computer simulations with artificial and real data sets illustrate that the proposed method works effectively for improving the precision of SIC, especially in the high-noise-level cases. We furthermore compare the proposed method to the original SIC, the cross-validation, and an empirical Bayesian method in ridge parameter selection, with good results.     

Effects of rice cleaning and cooking process on the residues of flutolanil,fenobucarb, silafluofen and buprofezin in rice

We studied the effect of cleaning and cooking on the residues of flutolanil, fenobucarb, silafluofen and buprofezin in rice. The rice had been sprayed in a paddy field in Wakayama city, with 3 kinds of pesticide application protocols: spraying once at the usual concentration of pesticides, repeated spraying (3 times) with the usual concentration of pesticides and spraying once with 3 times the usual concentration of pesticides. The residue levels of pesticide decreased during the rice cleaning process. Silafluofen, which has a higher log Pow value, remained in the hull of the rice. Fenobucarb, which has a lower log Pow value, penetrated inside the rice. The residue concentration of pesticide in polished rice was higher than that in pre-washed rice processed ready for cooking. During the cooking procedure, the reduction of pesticides in polished rice was higher than that in brown rice.     

Chemiluminescence detection for a microchip capillary electrophoresis system fabricated in poly(dimethylsiloxane)

Chemiluminescence (CL) detection integrated with a microchip capillary electrophoresis (MCE) system that was fabricated in poly(dimethylsiloxane) was demonstrated for chemical and biochemical analyses. Two model CL systems were involved here: metal ion-catalyzed luminol-peroxide reaction and dansyl species conjugated peroxalate-peroxide reaction. Different strategies based on three chip patterns (cross, cross combining with Y, and cross combining with V) to perform on-line CL detection for MCE were evaluated and compared in terms of sensitivity, reproducibility, and peak symmetry. The chip pattern of cross combining with Y proved to be promising for the luminol-peroxide CL system, while the chip pattern of cross combining with V was preferred for the peroxalate-peroxide system where CL reagent could not be effectively transported by electroosmotic flow. A detection limit down to submicromolar concentrations (midattomole) was achieved with good reproducibility and symmetric peak shape. Successful separation of three metal cations such as Cr(III), Co(II), and Cu(II) and chiral recognition of dansyl phenylalanine enantiomers within 1 min revealed distinct advantages of combining MCE with CL detection for rapid and sensitive analyses.     

Synthesis of the Bi-2222 Compounds of Bi–Sr–Ln(Zr)–Cu–O (Ln = Sm,Eu, Gd,and Dy)

Bi-based superconducting compounds with the 2222 structure has been already synthesized in the Bi₂Sr₂- (Ln_1−x Ce _x )₂Cu₂O_10+y (Ln = Sm, Eu, and Gd) systems. One of the characteristics of these compounds is the existence of the fluorite-like (Ln_1−x Ce _x )₂O₂ block between two CuO₅ pyramids in the crystal structure. The tetravalent ions of Ce⁴⁺ are reported to be necessary to stabilize the 2222 structure. Recently, we have discovered that the Bi-2222 phase could be composed in the Bi₂Sr₂(Ln_2−x Zr _x )Cu₂O _z (Ln = Sm, Eu, Gd, and Dy) systems, where Zr⁴⁺ is used as a new tetravalent ion stabilizing the 2222 structure in stead of Ce⁴⁺. In the new system, nearly single 2222 phase samples have been obtained at the nominal composition of x=0.5 (Ln = Sm, Eu, and Gd) and in the range of 0.1≤x≤0.3 (Ln = Dy). Among them, the sample with Ln = Gd has the smallest resistivity at 273 K. But it is a semiconductor, and the conduction process at low temperatures is assumed to be followed by a two-dimensional VRH. The experimental results for the Gd samples with a partial substitution of Pb for Bi in the Bi₂Sr₂(Gd_2−x Zr _x )Cu₂O _z system are also reported.