Tunable passively Q-switched thulium doped fluoride fibre (TDFF) laser using reduced graphene oxide-silver (rGO-Ag) as saturable absorber

A tunable, passively Q-switched thulium doped fluoride fibre (TDFF) laser using a reduced-graphene oxide-silver (rGO-Ag) thin film as a saturable absorber (SA) for S band operation is proposed and its efficacy demonstrated. Over a pump power range of 91.4?mW up to 158.6?mW, passively generated Q-switched pulses are observed with repetition rates from 20 to 34.5?kHz and pulse widths from 3.1 to 7.1?µs. The highest pulse energy observed is 101.2?nJ with a signal to noise ratio of ～42?dB. The proposed laser has a tuning range ～52?nm from 1458 to 1510?nm with a tunable bandpass filter (TBPF) introduced into the cavity.     

Targeted Delivery of Anesthetic Agents to Bone Tissues using Conductive Microneedles Enhanced Iontophoresis for Painless Dental Anesthesia

Pain management during dental procedures is a cornerstone for successful daily practice. In current practice, the traditional needle and syringe injection is used to administer local anesthesia. However, the appearance of long needles and the pain associated with it often leads to dental anxiety deterring timely interventions. Microneedles (MNs) have emerged as a minimally invasive alternative to hypodermic needles and shown to be effective in transdermal drug delivery applications. In this article, the potential use of MNs for local anesthesia delivery in dentistry is explored. The development of a novel conductive MN array that can be used in combination with iontophoresis technique to achieve drug penetration through the oral mucosa and the underlying bone tissue is presented. The conductive MN array plays a dual-role, creating micro-conduits and lowering the resistance of the oral mucosa. The reduced tissue resistance further enhances the application of a low-voltage current that is able to direct and accelerate the drug molecules to target the sensory nerves supplying teeth. The successful delivery of lidocaine using this new strategy in a clinically relevant rabbit incisor model is shown to be as effective as the current gold standard.     

Siamese convolutional neural network and fusion of the best overlapping blocks for kinship verification

Multimedia Tools and Applications - Analysis of facial images decoding familial features has been attracting the attention of researchers to develop a computerized system interested in determining...     

Physical,microstructure and leaching assessments for pavement road base containing mixed steel slag and cathode ray tube glass

Clean Technologies and Environmental Policy - Use of by-product materials, such as steel slag and cathode ray tube glass, as alternative recycled materials in the construction of roads, could...     

Raft crystals of poly(isoprene)-block-poly(ferrocenyldimethylsilane) and their surface wetting behavior during melting as observed by AFM and NanoTA

We report on the morphology evolution during heating and melting of lamellar poly(isoprene)-block-poly(ferrocenyldimethylsilane) (PI₇₆-b-PFDMS₇₆) raft crystals deposited at the native oxide surface of silicon (SiO₂) or at a highly ordered pyrolytic graphite (HOPG) surface, studied by in situ temperature controlled atomic force microscopy. Crystals deposited on hydrophilic SiO₂ surfaces revealed an irreversible decrease in length at temperatures of up to tens of degrees above their expected melting temperature, while maintaining their platelet-like structure. Crystals deposited on hydrophobic HOPG surfaces initially decreased in length below their expected melting temperature, while at 120 °C and above a typical molten morphology was observed. In addition, the irreversible formation of a PI₇₆-b-PFDMS₇₆ wetting layer around the crystals was observed upon increasing the temperature. These observations in the morphological behavior upon heating emphasize the role of interfacial energy between a surface deposited block copolymer based macromolecular nanostructure and its supporting substrate.     

Synthesis of polyamidoxime chelating ligand from polymer‐grafted corn‐cob cellulose for metal extraction

A conventional free‐radical initiating process was used to prepare graft copolymers from acrylonitrile (AN) with corn‐cob cellulose with ceric ammonium nitrate (CAN) as an initiator. The optimum grafting was achieved with corn‐cob cellulose (anhydroglucose unit, AGU), mineral acid (H₂SO₄), CAN, and AN at concentrations of 0.133, 0.081, 0.0145, and 1.056 mol/L, respectively. Furthermore, the nitrile functional groups of the grafted copolymers were converted to amidoxime ligands with hydroxylamine under basic conditions of pH 11 with 4 h of stirring at 70°C. The purified acrylic polymer‐grafted cellulose and polyamidoxime ligand were characterized by Fourier transform infrared spectroscopy and field emission scanning electron microscopy analysis. The ligand showed an excellent copper binding capacity (4.14 mmol/g) with a faster rate of adsorption (average exchange rate = 7 min), and it showed a good adsorption capacity for other metal ions as well. The metal‐ion adsorption capacities of the ligand were pH‐dependent in the following order: Cu²⁺ > Co²⁺ > Mn²⁺ > Cr³⁺ > Fe³⁺ > Zn²⁺ > Ni²⁺. The metal‐ion removal efficiency was very high; up to 99% was removed from the aqueous media at a low concentration. These new polymeric chelating ligands could be used to remove aforementioned toxic metal ions from industrial wastewater. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40833.     

Adapting technology: effect of high-involvement HRM and organisational trust

This study is designed to empirically test a model of high-involvement human resource management (HIHRM), organisational trust, and technology adaptation grounded on social exchange theory in the context of the private banking sector. The proposed model intends to add to the understanding of the effect of HIHRM on technology adaptation via the mediating influence of organisational trust. Frontline employees were surveyed using a self-administered questionnaire. Results from partial least square-structural equation modelling suggest that there is a significant influence of HIHRM on technology adaptation. Organisational trust further mediates the relationship. Thus, this paper finds an answer to the ‘black box’ of human resource management (HRM) practices, explaining how HIHRM influences employees’ attitudes towards technology adaptation. The study can help management have a better understanding of the importance of employee involvement-oriented HRM in introducing and implementing a new technology through the integration of trust processes in the organisation.     

Physicochemical properties of liquid natural rubber bearing fluoro groups for hydrophobic surfaces

The modification of liquid natural rubber (LNR) has attracted interests among chemists as it brings improvements to several of its properties and widens its application to various fields. LNR can be modified into fluorinated LNR (F-LNR) which is of interest to industries due to its remarkable properties, including low surface energies, high thermal stabilities, together with its significant hydrophobic characters. In this work, a new route to prepare fluorinated rubber was presented. Hydroxylated LNR (OH-LNR) was initially synthesized in good yield via oxidation in the presence of tungsten complex catalyst and acetic acid with hydrogen peroxide as an oxidant. The optimum hydroxyl content of 57.0% was obtained within 6 h reaction time at 90 °C. In the second step, the esterification of OH-LNR using pentadecafluorooctanoyl chloride (PDFOC) under mild conditions was conducted, leading to LNR bearing fluoro groups in the side chain of LNR (F-LNR). ATR-FTIR spectroscopy was used to elucidate the structure and determine any changes in the functional groups that may have been induced during the reaction. ¹H NMR spectroscopy was employed to reveal that a high fluorine content of 48.6% was obtained using 3:1 molar ratio of OH-LNR:PDFOC for 8 h at 50 °C. The microstructure of F-LNR was further analyzed using ¹⁹F NMR and ¹³C NMR spectroscopies, and the results confirmed the presence of fluorine in LNR. Thermogravimetric analyses also indicated that the modification improved thermal stability of the LNR. Contact angle measurements were also conducted to verify the hydrophobicity of the fluorinated rubber and the results obtained showed that F-LNR exhibited higher hydrophobicity than LNR.