Effects of red-wine grape pomace on the quality and sensory attributes of beef hamburger patty

This study was conducted to evaluate the effect of red-wine grape pomaces on the quality and sensory attributes of beef hamburger patties. Both phenolic content and antioxidant activity were assessed using Syrah, Merlot and Cabernet Sauvignon pomaces. Following the assessment, hamburger patties were prepared with Merlot pomace at 0%, 2% and 4% for the patty quality and sensory attributes. Grape seeds possessed significantly higher phenolics and antioxidant activities over the seedless pomace (P < 0.05), whereas no significant difference was found for phenolics and antioxidant activities within the seeds and seedless pomaces. The patty pH decreased as the pomace was added for 2% and 4%. Colour values (L*, a* and b*) of patties lowered as the pomace was added. Allo-Kramer shear force and hardness values increased while cooking yield decreased (P < 0.05) with the addition of pomace. No significant difference between control and Merlot patties was found for flavour, juiciness and colour, whereas lower sensory attributes were observed for texture, taste and overall acceptability. It is observed that the addition of fermented red-wine grape pomace provides hamburger patties with health promoting factors such as antioxidant and other functional components, but it also provided darker, sourer and lower cooking yield.     

Prediction models for multiphase-flow-induced corrosion of API X80 steel in CO2/H2S environment

In the offshore oil and gas industry, mainly focusing on the use of rigid or flexible pipes of subsea infrastructure applied to risers or flowlines, one of the greatest difficulties is the interpretation of the combined effects of the various correlated phenomena (hydrodynamic effects of intermittent flow, the effects of corrosivity of the environment in addition to variations in pressure, temperature, and dynamic loading). On the basis of this scenario, defining the degree of severity of each of the correlated system variables becomes of fundamental importance for establishing reliable criteria for selecting materials for subsea application. The established flow pattern directly affects the corrosion rate (or the pipe material mass loss), but the balance of other variables including possible changes in the physical and transported fluid chemical properties may increase the damage up to an order of magnitude, which is a piece of information normally not foreseen in design criteria. Therefore, to improve the understanding of the corrosion study influenced by multiphase flow, a testing loop was designed and assembled at the Corrosion and Protection Laboratory of the Institute for Technological Research, in which API X80 steel coupons were positioned in locations with a 0° and 45° inclinations. Tests were conducted by varying the partial pressure of the gaseous phase containing blends of CO₂ and H₂S with N₂ balance, mixed with the liquid phase containing light oil and heavy oil in water with salinity (NaCl)-simulating oil well conditions with 80% water cut. The main objective of this study is to establish models that can predict the corrosion intensity in conditions close to those obtained experimentally. To achieve results, the multiple regression and Box–Cox transformation methods were applied. These models will make possible damage prediction and optimization of matrix parameters for the multiphase-loop test.     

An approach to torque and temperature thread by thread on tapping

During internal threading, small alterations in cutting parameters, tool geometry, or process characteristics produce considerable effects on torque and te     

Low-cost and high-performance 3D printed YBCO superconductors

High-performance YBCO 123 (YBa₂Cu₃O_7-x) bulk superconductor samples were produced using the 3D printing paste-extrusion technique. The YBCO powder obtained after sintering a pre-mixture of Y₂O₃, BaCO₃ and CuO powders at 950 °C was used in the formulation of pastes for extrusion in a 3D freeform printer. The 3D samples printed from pastes containing the pre-mixture powders were sintered, while those produced using the YBCO powder were not. X-ray diffraction (XRD), energy dispersive spectroscopy (EDS) and Raman analysis all confirmed the YBCO phase after sintering, both in the powder and in the samples made with the pre-mixture. Scanning electron microscopy (SEM) images revealed powder grains of heterogeneous size and geometry, as well as grain aggregation, in the sintered samples. Superconducting quantum interference device (SQUID) measurements taken within a fixed magnetic range revealed that the printed pieces have a typical magnetization temperature of 92 K, reaching ?1.43 emu/g and ?1.59 emu/g respectively a zero-field-cooled magnetization (ZFC) for sintered and non-sintered printed samples.     

Touch sensor and photovoltaic characteristics of CuSbS2 thin films

Spin-coated chalcostibite CuSbS₂ thin films (≈500 nm thick) were fabricated and the influence of the drying temperature on the structural, morphological, optical and thermoelectric properties of the films was investigated. Crystalline phase-pure chalcostibite has been obtained for the films dried at 180 °C and 210 °C, while below 180 °C these films are partially amorphous. Surprisingly, at drying temperature of 240 °C, a Cu_xS secondary phase appeared. The increase of the drying temperature leads to the increase of the particle size and the decrease of the optical band gap, which is interesting for optoelectronic applications. The highest power factor value was achieved for the film dried at 210 °C, due to the inexistence of secondary phases, which allowed realizing a stable thermoelectric touch sensor with a V_signal/_noise of 5. In addition, this film was tested as a photovoltaic (PV) device and a power conversion efficiency (PCE) of 0.030% with an open-circuit voltage (V_OC) of 0.36 V, a short-circuit current density (J_SC) of 0.278 mAcm^?2 and a fill factor (FF) of 0.27 were obtained. Therefore, this work evidences a pathway toward developing bi-functional devices with simultaneously thermoelectric touch sensor and photovoltaic functions.     

A computational literature review of football performance analysis through probabilistic topic modeling

This research aims to illustrate the potential use of concepts, techniques, and mining process tools to improve the systematic review process. Thus, a review was performed on two online databases (Scopus and ISI Web of Science) from 2012 to 2019. A total of 9649 studies were identified, which were analyzed using probabilistic topic modeling procedures within a machine learning approach. The Latent Dirichlet Allocation method, chosen for modeling, required the following stages: 1) data cleansing, and 2) data modeling into topics for coherence and perplexity analysis. All research was conducted according to the standards of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses in a fully computerized way. The computational literature review is an integral part of a broader literature review process. The results presented met three criteria: (1) literature review for a research area, (2) analysis and classification of journals, and (3) analysis and classification of academic and individual research teams. The contribution of the article is to demonstrate how the publication network is formed in this particular field of research, and how the content of abstracts can be automatically analyzed to provide a set of research topics for quick understanding and application in future projects.