Reconstituted yogurt from yogurt cultured milk powder mix has better overall characteristics than reconstituted yogurt from commercial yogurt powder

For manufacture of commercial yogurt powder, yogurt has to go through a drying process, which substantially lowers the yogurt culture counts, so the potential health benefits of the yogurt culture bacteria are reduced. Also, upon reconstitution, commercial yogurt powder does not taste like yogurt and has an off-flavor. The objective was to study the microbial, physicochemical, and sensory characteristics of reconstituted yogurt from yogurt cultured milk powder (YCMP) mix and reconstituted yogurt from commercial yogurt powder (CYP). The CYP reconstituted yogurt was the control and YCMP mix reconstituted yogurt was the treatment. Microbial and physicochemical characteristics of the CYP reconstituted yogurt and YCMP mix reconstituted yogurt were analyzed daily for the first week and then weekly for a period of 8 wk. Sensory consumer testing of CYP reconstituted yogurt and YCMP mix reconstituted yogurt was conducted with 100 consumers. At 56 d, YCMP mix reconstituted yogurt had 5 log cfu/mL higher counts of Streptococcus thermophilus than the control (CYP reconstituted yogurt). Also, Lactobacillus bulgaricus counts of YCMP mix reconstituted yogurt were 6.55 log cfu/mL at 28 d and were 5.35 log cfu/mL at 56 d, whereas the CYP reconstituted yogurt from 28 d onwards had a count of <10 cfu/mL. The YCMP mix reconstituted yogurt also had significantly higher apparent viscosity and sensory scores for appearance, color, aroma, taste, thickness, overall liking, consumer acceptability, and purchase intent than CYP reconstituted yogurt. Overall, YCMP mix reconstituted yogurt had more desirable characteristics than CYP reconstituted yogurt.     

Short communication: Salt tolerance of Lactococcus lactis R-604 as influenced by mild stresses from ethanol,heat, hydrogen peroxide,and UV light

Lactococcus lactis is a culture widely used in salt-containing dairy products. Salt hinders bacterial growth, but exposure to environmental stress may protect cells against subsequent stress, including salt. The objective of this study was to evaluate the salt tolerance of L. lactis R-604 after exposure to various stresses. The culture was subjected to 10% (vol/vol) ethanol for 30 min, mild heat at 52°C for 30 min, 15 mM hydrogen peroxide for 30 min, or UV light (254 nm) for 5 min and compared with a control. Starting with 5 log cfu/mL for all treatments, growth was determined in M17 broth with 5 NaCl concentrations (0, 1, 3, 5, and 7% wt/vol). Plating was conducted daily for 5 d. Salt tolerance was enhanced with mild heat exposure before growth in M17 broth with 5% (wt/vol) NaCl on d 3, 4, and 5, and with exposure to hydrogen peroxide and ethanol stresses before growth in M17 broth with 5% (wt/vol) NaCl on d 4 and 5. Exposure of this culture to mild heat, hydrogen peroxide, or ethanol before growth in M17 broth containing 5% (wt/vol) salt can enhance its survival, which could be beneficial when using it in salt-containing dairy products.     

Some low homogenization pressures improve certain probiotic characteristics of yogurt culture bacteria and Lactobacillus acidophilus LA-K

Lactobacillus delbrueckii ssp. bulgaricus, Streptococcus salivarius ssp. thermophilus, and Lactobacillus acidophilus are dairy cultures widely used in the manufacture of cultured dairy products. Commonly used homogenization pressures in the dairy industry are 13.80 MPa or less. It is not known whether low homogenization pressures can stimulate bacteria to improve their probiotic characteristics. Objectives were to determine the effect of homogenization at 0, 3.45, 6.90, 10.34, and 13.80 MPa on acid tolerance, bile tolerance, protease activity, and growth of L. delbrueckii ssp. bulgaricus LB-12, S. salivarius ssp. thermophilus ST-M5, and L. acidophilus LA-K. The cultures were individually inoculated in cool autoclaved skim milk (4°C) and homogenized for 5 continuous passes. Growth and bile tolerance of samples were determined hourly for 10 h of incubation. Acid tolerance was determined every 20 min for 120 min of incubation. Protease activity was determined at 0, 12, and 24 h of incubation. All homogenization pressures studied improved acid tolerance of L. delbrueckii ssp. bulgaricus LB-12 but had no beneficial effect on protease activity and had negative effects on growth and bile tolerance. A pressure of 6.90 MPa improved acid tolerance, bile tolerance, and protease activity of S. salivarius ssp. thermophilus ST-M5, but none of the homogenization pressures studied had an effect on its growth. Homogenization pressures of 13.80 and 6.90 MPa improved acid tolerance and bile tolerance, respectively, of L. acidophilus LA-K but had no effect on protease activity and its growth. Some low homogenization pressures positively influenced some characteristics of yogurt culture bacteria and L. acidophilus LA-K. Culture pretreatment with some low homogenization pressures can be recommended for improvement of certain probiotic characteristics.     

The impact of geological uncertainty on primary production from a fluvial reservoir

Deposition of fluvial sandbodies is controlled mainly by characteristics of the system, such as the rate of avulsion and aggradation of the fluvial channels and their geometry. The impact and the interaction of these parameters have not received adequate attention. In this paper, the impact of geological uncertainty resulting from the interpretation of the fluvial geometry, maximum depth of channels, and their avulsion rates on primary production is studied for fluvial reservoirs. Several meandering reservoirs were generated using a process-mimicking package by varying several controlling factors. Simulation results indicate that geometrical parameters of the fluvial channels impact cumulative production during primary production more significantly than their avulsion rate. The most significant factor appears to be the maximum depth of fluvial channels. The overall net-to-gross ratio is closely correlated with the cumulative oil production of the field, but cumulative production values for individual wells do not appear to be correlated with the local net-to-gross ratio calculated in the vicinity of each well. Connectedness of the sandbodies to each well, defined based on the minimum time-of-flight from each block to the well, appears to be a more reliable indicator of well-scale production.     

Structural Stabilization and Piezoelectric Enhancement in Epitaxial (Ti1−xMgx)0.25Al0.75N(0001) Layers

Epitaxial (Ti_1?xMg_x)_0.25Al_0.75N(0001)/Al₂O₃(0001) layers are used as a model system to explore how Fermi‐level engineering facilitates structural stabilization of a host matrix despite the intentional introduction of local bonding instabilities that enhance the piezoelectric response. The destabilizing octahedral bonding preference of Ti dopants and the preferred 0.67 nitrogen‐to‐Mg ratio for Mg dopants deteriorate the wurtzite AlN matrix for both Ti‐rich (x < 0.2) and Mg‐rich (x ≥ 0.9) alloys. Conversely, x = 0.5 leads to a stability peak with a minimum in the lattice constant ratio c/a, which is caused by a Fermi‐level shift into the bandgap and a trend toward nondirectional ionic bonding, leading to a maximum in the expected piezoelectric stress constant e₃₃. The refractive index and the subgap absorption decrease with x, the optical bandgap increases, and the elastic constant along the hexagonal axis C₃₃ = 270 ± 14 GPa remains composition independent, leading to an expected piezoelectric constant d₃₃ = 6.4 pC N^?1 at x = 0.5, which is 50% larger than for the pure AlN matrix. Thus, contrary to the typical anticorrelation between stability and electromechanical coupling, the (Ti_1?xMg_x)_0.25Al_0.75N system exhibits simultaneous maxima in the structural stability and the piezoelectric response at x = 0.5.     

Functionality of Palm Oil as a Stabilizer in Peanut Butter

ABSTRACT: Studies have shown that palm oil is an effective stabilizer in peanut butter. The objective of our investigation was to better define the role of palm oil as a stabilizer. Peanut butters without and with palm oil added at concentrations of 1.5, 2.0, and 2.5% (w/w of peanuts), and Fix-X™ (hydrogenated rapeseed and cottonseed oils as commercial control) were stored at 0, 21, 30, and 45 °C for 23 wk. Palm oil improved the oil holding capacity (OHC) of peanut butters, but had no effect on their adhesiveness and hardness characteristics. The unstabilized and palm oil-stabilized peanut butters were not as good as the Fix-X™ stabilized peanut butters with regard to their OHC, hardness, and adhesiveness characteristics.     

Lutein Is Stable in Strawberry Yogurt and Does Not Affect its Characteristics

ABSTRACT:  The impact of various levels of lutein on the physicochemical, microbiological, and sensory characteristics of yogurt over its shelf life was determined. Nonfat strawberry yogurts were prepared with 0, 0.5, 1.5, and 3.0 mg lutein per 170 g serving (20% overages were included to account for processing losses). The lutein was incorporated prior to homogenization of the yogurt mix. Stability of lutein, viscosity, pH, syneresis, standard plate counts, coliform counts, color (L*, a*, b*), and sensory evaluation (flavor, body and texture, and appearance and color) were measured at weeks 0, 1, 3, and 5 after product manufacture. The interaction effect between levels of lutein and storage time was significant for a* (redness-greenness) values. Lutein levels remained above target throughout the 5-wk storage study. Lutein did not affect viscosity, pH, syneresis, L* (lightness) and b* (yellowness-blueness) values, standard plate counts, coliform counts, flavor, body, texture, appearance, and color scores. These results suggested that lutein was suitable for inclusion in functional yogurts. The skin and eye health benefits provided by lutein can easily be incorporated into yogurt to complement inherent nutritional properties.     

A 100-Year Review: Yogurt and other cultured dairy products

The history of the last 100 years of the science and technology of yogurt, sour cream, cultured butter, cultured buttermilk, kefir, and acidophilus milk has been one of continuous development and improvement. Yogurt leads the cultured dairy product category in terms of volume of production in the United States and recent research activity. Legal definitions of yogurt, sour cream and acidified sour cream, and cultured milk, including cultured buttermilk, are presented in the United States Code of Federal Regulations and summarized here. A tremendous amount of research has been done on traditional and novel ingredients, starter cultures and probiotics, mix processing, packaging, chemical aspects, physical and sensory properties, microstructure, specialized products, composition, quality and safety of yogurt and various manufacturing methods, addition of flavorings, viscosity measurements, and probiotic use for sour cream. Over time, there have arisen alternative manufacturing methods, flavor problems, addition of flavorings, and use of probiotics for cultured buttermilk. Many health benefits are provided by yogurt and other cultured dairy products. One hundred years of testing and development have led to wider uses of cultured dairy products and new processing methods for enhanced shelf life and safety. Future research directions will likely include investigating the effects of probiotic dairy products on gut microbiota and overall health.