Biomimetic crystallization of calcium carbonate in the presence of water‐soluble zwitterionic block copolymer

Crystallization of calcium carbonate (CC) in aqueous solutions by gas‐liquid diffusion procedure was investigated systematically in the presence of poly(4‐sulfonic acid diphenylamine)‐block‐poly(ethylene glycol) (PSDA‐b‐PEG), wherein the PSDA block is a polymeric zwitterion. PSDA‐b‐PEG was synthesized with the reaction of tosylated PEG and amine‐functionalized PSDA and was characterized by nuclear magnetic resonance. The parameters such as, block copolymer concentration, crystallization time and initial pH were considered as indicators of block copolymer's capability in controlling the morphology of CC particles_. The particles were characterized by Fourier transform infrared, scanning electron microscopy, and X‐ray diffraction. The results suggest that PSDA‐b‐PEG is a suitable template to control the growth mechanism of CC to produce meso‐sized particles with different morphologies. POLYM. ENG. SCI., 59:96–102, 2019. © 2018 Society of Plastics Engineers     

Graphite intercalated polymer coatings on stainless steel

The use of graphite modified polymer films has been investigated, on stainless steel. Polythiophene and polypyrrole films have been synthesized electrochemically on stainless steel, and then very thin graphite layers were realized on polymer films. Since the graphite layer is not applicable as a top coat, polymeric top films were also electrosynthesized on graphite layers. Following this procedure, polypyrrole-graphite-polypyrrole and polythiophene-graphite-polythiophene coatings have been obtained on stainless steel. The corrosion behaviours of coated samples have been investigated in 0.1 M H₂SO₄ solution, by means of electrochemical impedance spectroscopy (EIS) and anodic polarization curves. The intercalation of graphite layer altered the performance and properties of coatings significantly. Especially, polypyrrole coating system was found to exhibit almost an excellent coating behaviour that hindered the attack of corrosive environment within 96 h exposure time. The EIS results of polypyrrole coating system were indicating to almost a perfect capacitive behaviour that the response was reflecting capacitive behaviour in a wide frequency region. This property was also examined with successive cyclic voltammograms in a potential range between 0.10 and 0.40 V (vs. Ag/AgCl). The charge densities involved in oxidation and reduction regions were determined for successive cycles and it was shown that coated sample was able to exhibit charge-discharge (i.e. oxidation and reduction) behaviour successfully, without any degradation.     

Effect of brewing process and sugar content on 5-hydroxymethylfurfural and related substances from Turkish coffee

The effect of brewing process on 5-hydroxymethylfurfural, 2-furylmethylketone, and 2-furoic acid levels of traditionally prepared and instant Turkish coffee samples containing different amounts of table sugar (0, 2, 4, or 8 g in 20 mL of coffee) were analyzed by high pressure liquid chromatography with diode array detector. The highest change at the levels of furfurals was observed in sample of traditional and instant Turkish coffee named T4 and S4 both of containing 8 g of sugar, respectively. The results showed that 5-hydroxymethylfurfural, 2-furylmethylketone, and 2-furoic acid concentrations in both traditionally prepared and instant Turkish coffee samples increased with increasing sugar concentration. The brewing method and sugar concentration had a significant effect on furfural contents of Turkish coffee (p < 0.05). Daily intakes of furfurals for Turkish population were calculated as 8.14–13.54 and 9.36–10.25 µg kg^?1 body weight for traditionally prepared and instant Turkish coffee samples, respectively, and daily intakes of furfurals were lower than the acceptable daily intake value of 0.5 mg kg^?1 body weight.     

Synthesis,characterization and polymerization of novel sugars based on methacrylate

The present study describes the synthesis and characterizations of polymerizable vinyl sugars. Glucose, mannose, galactose and fructose are abundant and sustainable natural compounds. As it is not possible to make many derivatives of sugars without using protective groups, first of all, diacetone derivatives [diacetone-d-glucose (1), diacetone-d-mannose (2), diacetone-d-galactose (3) and diacetone-d-fructose (4)] were synthesized according to the literature as starting compounds. The remaining free hydroxyl groups on C-3 (diacetone glucose), C-6 (diacetone galactose), C-1 (diacetone fructose) and C-1 (diacetone mannose), were reacted with epichlorohydrin (1-chloro-2,3-epoxypropane) to produce then “-O-(2′,3′-epoxypropane-1′-yl)” ether derivatives (5, 6, 7, and 8) which are epoxy sugars in the basic medium. Next, the epoxy rings of the ethers (5, 6, 7, and 8) were opened with methacrylic acid in DMF to produce new sugar based methacrylates (9, 10, 11, and 12). Finally, free radical polymerization of these sugar based methacrylate monomers was performed, producing related polymers (13, 14, 15 and 16). The polymerizations were carried out using AIBN as an initiator at 70 °C in DMF. All the products were characterized by FTIR, ¹HNMR and ¹³CNMR techniques. Thermal properties of all polymers were investigated by TG, DTG and DSC. The data obtained has suggested that thermal stability of the synthesized polymers has changed with the structure of the sugar and increase in molecular weight.     

Effect of high valency cations on the (BiPb)2Sr2Ca3Cu4O12+δ compounds

We have produced the (BiPb)₂V _x Sr₂Ca₃Cu_4−y Ti _y O_12+δ compounds by a melt-quenching method. For two different sintering times (185 and 192 hours), the effects of vanadium adding and Ti doping on the structure have been investigated by electrical resistance, scanning electron micrographs (SEM), XRD patterns and magnetic hysteresis loop measurements. It has been found that the high-T _c superconducting phase, (2223), is formed in the samples annealed at 845 ^○C for 185 and 192 h, with concentration x=0.2 and y=0.05. However, with increasing Ti doping the (2223) phase gradually transforms into the (2212) phase. The hysteresis loop areas decrease with increasing Ti concentration and sintering time. Our data have indicated that the critical current, J _c , decreases with increasing magnetic field.     

Mining-induced stress change and consequences of stress path on excavation stability — a case study

For stability assessments as well as for support design, it is important to understand the factors leading to detrimental stress changes. Stress changes not only influence the demand on the rock support, they also change the support capacity of frictional support components such as plain cablebolts. Stress and stress changes are commonly predicted by numerical models but it is rarely possible to verify these predictions. This study presents a practical example illustrating the usefulness of stress change measurements in providing an accurate picture of the mining-induced stress changes and their value for numerical model calibration. Stress changes, associated with mining of the 565#6 stope at Winston Lake Mine, were measured by four CSIRO HI stress cells, two in the hangingwall and two in the back of a sill drift. In order to obtain the full stress history of the hangingwall, stresses at the installation time were calculated by use of a three-dimensional boundary element program — MAP3D. Two types of rockmass failure were observed at this mine: hangingwall delamination and collapse leading to ore dilution, and wedge-like failures in the backs of sill drifts. All stress cells were located such that they were affected by these failure mechanisms. Using measured and predicted stress paths, this study explains the nature of these two failure modes, as experienced at Winston Lake Mine. Excellent correspondence between measured and predicted stresses is achieved for both the hangingwall and the back of the sill drifts. Modelled stress rotations in the hangingwall follow closely the stress rotations determined in the field, except at the end of the monitoring campaign when the stress cells were affected by inelastic straining of the host rock. These measurements assist in understanding the failure processes and in defining the limitations of the adopted numerical models.     

The effect of soy protein concentrate addition on the physical, chemical, and sensory properties of strawberry flavored ice cream

The effect of soy protein concentrate (0, 1.5, 3, and 4.5%) on the physical, chemical, and sensory properties of strawberry flavored (0, 0.01 and 0.02%) ice cream samples was examined. All samples were analyzed for pH, titratable acidity, total solids, nitrogen, fat, ash, overrun, viscosity, meltdown, Hunter L-, a-, b- values, flavor, body and texture, and appearance. Substituting soy protein concentrate (SPC) in ice cream formula for non-fat dry milk (NFDM) positively influenced the nitrogen content, viscosity values, and melting and appearance properties of the ice cream samples while overrun values and flavor scores were negatively affected. SPC could be incorporated into the ice cream formula in the range of 1.5–3% devoid of significantly diminishing the physical, chemical, and sensory properties.     

Effects of flow induced orientation of ferromagnetic particles on relative magnetic permeability of injection molded composites

Composite samples consisting of ferromagnetic asymmetric particles incorporated into a polyolefin binder were injection molded using custom designed molds which produced preferential fiber orientations. The relative magnetic permeability values of the composites were measured as a function of the filler volume fraction, injection rate, gate diameter, temperature, aspect ratio of the fibers, and fiber orientation. Fiber orientation was affected by the molding conditions and controlled the relative magnetic permeability of the composites. The degree of fiber orientation was significantly affected by the size of the opening (gate) to the mold, or by the mold geometry going from an edge-gated cylindrical to a center-gated disk cavity. Relative permeability values of the composites were observed to increase when the fiber orientation and the applied field were parallel to one another. For instance, highly aligned composite samples exhibited up to 30% greater relative permeability values compared to those samples which exhibit fiber orientation distributions approaching a random distribution. To our knowledge this is the first study that provides data linking the fiber orientation distribution functions of ferromagnetic asymmetric particles to the relative magnetic permeability values of injection molded composites.