A comparison of emulsifiers for the formation of oil-in-water emulsions: stability of the emulsions within 9 h after production and MR signal properties

Objective

To provide a basis for the selection of suitable emulsifiers in oil-in-water emulsions used as tissue analogs for MRI experiments. Three different emulsifiers were investigated with regard to their ability to stabilize tissue-like oil-in-water emulsions. Furthermore, MR signal properties of the emulsifiers themselves and influences on relaxation times and ADC values of the aqueous phase were investigated.

Materials and methods

Polysorbate 60, sodium dodecyl sulfate (SDS) and soy lecithin were used as emulsifiers. MR characteristics of emulsifiers were assessed in aqueous solutions and their function as a stabilizer was examined in oil-in-water emulsions of varying fat content (10, 20, 30, 40, 50%). Stability and homogeneity of the oil-in-water emulsions were evaluated with a delay of 3 h and 9 h after preparation using T₁ mapping and visual control. Signal properties of the emulsifiers were investigated by ¹H-MRS in aqueous emulsifier solutions. Relaxometry and diffusion weighted MRI (DWI) were performed to investigate the effect of various emulsifier concentrations on relaxation times (T₁ and T₂) and ADC values of aqueous solutions.

Results

Emulsions stabilized by polysorbate 60 or soy lecithin were stable and homogeneous across all tested fat fractions. In contrast, emulsions with SDS showed a significantly lower stability and homogeneity. Recorded T₁ maps revealed marked creaming of oil droplets in almost all of the emulsions with SDS. The spectral analysis showed several additional signals for polysorbate and SDS. However, lecithin remained invisible in ¹H-MRS. Relaxometry and DWI revealed different influences of the emulsifiers on water: Polysorbate and SDS showed only minor effects on relaxation times and ADC values of aqueous solutions, whereas lecithin showed a strong decrease in both relaxation times (r_1,lecithin = 0.11 wt.%⁻¹ s⁻¹, r_2,lecithin = 0.57 wt.%⁻¹ s⁻¹) and ADC value (Δ(ADC)_lecithin =  − 0.18 × 10^–3 mm²/s⋅wt.%) with increasing concentration.

Conclusion

Lecithin is suggested as the preferred emulsifier of oil-in-water emulsions in MRI as it shows a high stabilizing ability and remains invisible in MRI experiments. In addition, lecithin is suitable as an alternative means of adjusting relaxation times and ADC values of water.

     

Investigations on the Corrosion Properties of Sn–1Cu–1Ni–xAg Lead Free Solders in 3.5% NaCl Solution

Protection of Metals and Physical Chemistry of Surfaces - Due to the directions and environmental legislations from RoHS (Restrictions of Hazardous Substances), WEEE (World Electrical and...     

Priority Aware and Spectrum Efficient Scheduling of Co-existing Wireless Body Area Networks

Real-time continuous and remote health monitoring has become widespread due to the developments in Wireless body area networks (WBANs). Based on the criticality of health data to be transmitted, regular healthcare data and critical emergency health data must be provided differential service. In this paper, we consider the beyond WBAN communication in a system comprising multiple WBANs with different quality of service (QoS) requirements and multiple access points (APs), and propose two hybrid approaches for resource allocation. In the first approach, the AP association to the WBANs and channel allocation to the APs are done jointly and is modelled as an optimization problem, which is computationally complex and it also requires global network information. In order to reduce the involvement of APs in making decisions for resource allocations of WBANs, the problem is reformulated as a Stackelberg game with price update, which guarantees QoS of the critical users. A learning based algorithm, namely distributed learning for Pareto optimality, is used by the normal users, in this second approach. The performance of both the proposed approaches are evaluated and compared, in terms of the throughput of the critical and normal users as well as the QoS guarantee of the critical users.

     

Correction to: Matrix spectral factorization for SA4 multiwavelet

Multidimensional Systems and Signal Processing - After a careful review of the published version of our paper, we discovered that some references to the number of multiwavelet decomposition and...     

A cathode support structure for use in a magnetron oscillator experiment

A low temperature co-fired ceramic (LTCC) material system has been used to develop a protype field emission cathode structure for use in an experimental magnetron oscillator. The structure is designed for used with 30 gated field emission array (GFEA) die electrically connected through silver metal traces and electrical vias. To approximate a cylinder, the cathode structure (48 mm long and 13.7 mm in diameter) is comprised of 10 faceted plates which cover the GFEA dies. Slits in the facet plates allow electron injection. The GFEA die (3 mm × 8 mm) are placed in axial columns of 3 and spaced azimuthally around a cylindrical support structure in a staggered configuration resulting in 10 azimuthal locations. LTCC manufacturing techniques were developed in order to fabricate the newly designed cathode with seven layers wrapped to form the cylinder with electrical traces and vias. Two different cathode wrapping techniques and two different via filling techniques were studied and compared. Two different facet plate manufacturing techniques were studied. Finally, four different support stand configurations for firing the cylindrical structure were also compared with a square post stand having the best circularity and linearity measurements of the fired structure.     

Design of a thermal management system for a battery pack in an electric vehicle using Dymola

As the world moves toward more green and efficient means of modes of transport, electric vehicles are the most suitable and ideal choice to fulfill this requirement. Rapid developments in the field of battery technology are the main reason for their progress, but thermal management in such systems has been an area of concern for a long time. The work undertaken is to design and develop a battery management system (BMS) with a specific focus on the thermal behavior of the battery pack with varying vehicle loads as well as environmental conditions. To design an efficient BMS, one needs to model the battery behavior covering the thermal as well as electrical aspects of the battery. Apart from the battery model, a mathematical model of the electrical vehicle to mimic the various road load conditions for battery also needs to be modeled. Depending on the need for cooling based on battery behavior, the cooling circuit is modeled for the battery pack used. The entire study has been carried out using Dymola, a mathematical modeling software.     

Development and validation of a new friction model for cutting processes

The International Journal of Advanced Manufacturing Technology - The friction model in the tool-chip interface has significant influences on predicting chip forms, cutting forces, and cutting tool...     

Investigations on the Effect of Tungsten Carbide and Graphite Reinforcements during Spark Erosion Machining of Aluminium Alloy (AA 5052) Hybrid Composite

Silicon - Reinforcements introduced to metal matrix composites are known for their inherent properties like corrosion resistance, wear resistance and machinability. This study deals with the...     

A new approach to characterizing asphalt concrete in the linear/nonlinear small strain domain

Mechanics of Time-Dependent Materials - Asphalt concrete (AC) material characterization is usually performed on laboratory prepared specimens, a procedure that does not ensure that the material...     

Ultrastrong Medium‐Entropy Single‐Phase Alloys Designed via Severe Lattice Distortion

Severe lattice distortion is a core effect in the design of multiprincipal element alloys with the aim to enhance yield strength, a key indicator in structural engineering. Yet, the yield strength values of medium‐ and high‐entropy alloys investigated so far do not substantially exceed those of conventional alloys owing to the insufficient utilization of lattice distortion. Here it is shown that a simple VCoNi equiatomic medium‐entropy alloy exhibits a near 1 GPa yield strength and good ductility, outperforming conventional solid‐solution alloys. It is demonstrated that a wide fluctuation of the atomic bond distances in such alloys, i.e., severe lattice distortion, improves both yield stress and its sensitivity to grain size. In addition, the dislocation‐mediated plasticity effectively enhances the strength–ductility relationship by generating nanosized dislocation substructures due to massive pinning. The results demonstrate that severe lattice distortion is a key property for identifying extra‐strong materials for structural engineering applications.