Biogenic amines assessment during different stages of the canning process of skipjack tuna (Katsuwonus pelamis)

The present research focused on the biogenic amines (BAs) formation in skipjack tuna (Katsuwonus pelamis) throughout the whole canning process. In agreement with its wide employment on this species, on‐board brine immersion freezing (BIF) was tested as post‐mortem processing. The study included fish samples corresponding to different stages of the canning process such as frozen, thawed, cooked and canned; after cooking, two kinds of tuna muscles were considered, that is, whole fillets (main product) and grated muscle (off‐product arising from small pieces). For the BAs (tryptamine, putrescine, cadaverine, histamine, spermidine and spermine) assessment, an HPLC‐DAD method was developed and validated in skipjack tuna samples, in agreement with different parameters such as suitability, linearity, limits of detection and quantification, precision, accuracy and robustness. Tuna submitted on‐board to BIF procedure provided low levels of spermine and spermidine (up to 27.6 mg kg^?1), while contents on the remaining BAs maintained below the limit of detection. Throughout the different stages of the canning process, skipjack tuna showed a low formation of most BAs; interestingly, histamine content was found below 10.6 mg kg^?1 level. The highest values were obtained for spermidine, these related to cooked grated tuna (from 22.6 to 66.7 mg kg^?1) and canned grated tuna (from 70.6 to 104.4 mg kg^?1). Values for pH assessment in all kinds of tuna samples corroborated the results obtained for BAs determination. BIF procedure proved to be an amenable post‐mortem processing to guarantee the quality of canned skipjack tuna.     

Peracetic acid as a single endodontic irrigant: effects on microhardness,roughness and erosion of root canal dentin

The aim was to assess the effects of 1% peracetic acid (PAA) as a single endodontic irrigant on microhardness, roughness, and erosion of root canal dentin, compared with 2.5% sodium hypochlorite (NaOCl) and with 2.5% NaOCl combined with 17% EDTA. Forty human, single‐rooted tooth hemisections were submitted to Knoop microhardness test, before and after the following irrigation protocols: PAA = 1% PAA; NaOCl = 2.5% NaOCl; NaOCl‐EDTA‐NaOCl = 2.5% NaOCl +17% EDTA +2.5% NaOCl; and SS = saline. Another 40 roots were instrumented, irrigated with the same protocols, and sectioned longitudinally. The roughness analysis was performed on the mesial section using a confocal laser scanning microscope, whereas erosion was analyzed on each third of the distal section, using a scanning electron microscope. The data were analyzed using ANOVA and Tukey post‐tests, and Kruskal‐Wallis and Dunn post‐tests (α = .05). The PAA and NaOCl‐EDTA‐NaOCl groups showed no significant differences (p > .05); both promoted reduction in microhardness and increase in roughness, compared with the NaOCl and SS groups (p < .05). NaOCl‐EDTA‐NaOCl promoted higher erosion in the cervical and middle thirds than the other groups (p < .05); there was no difference among PAA, NaOCl, and SS (p > .05). There was also no difference among the groups regarding the apical third (p > .05). PAA used as a single endodontic irrigant caused reduction in root canal dentin microhardness and increase in roughness in a similar way to NaOCl‐EDTA‐NaOCl; however, PAA caused less erosion than NaOCl‐EDTA‐NaOCl.     

Cleaning capacity of octenidine as root canal irrigant: A scanning electron microscopy study

The aim of this study was to assess the cleaning capacity of the octenidine hydrochloride (OCT) used as root canal irrigant by scanning electron microscopy (SEM) analysis. Sixty human unirradicular extracted teeth were randomly distributed in 6 groups (n = 10) according to irrigant solutions which were used during root canal preparation: G1, 0.1% OCT; G2, 2% chlorhexidine (CHX); G3, 2.5% sodium hypochlorite (NaOCl); G4, OCT + 17% ethylenediaminetetraacetic acid (EDTA); G5, 2.5% NaOCl + 17% EDTA and G6, distilled water. All specimens were instrumented with ProTaper system up to F4. Teeth were sectioned and prepared for SEM. The smear layer was evaluated using a 5‐score system and the data were analyzed by Kruskal–Wallis and Dunn (α = 0.05). In all root canal thirds there was no significant difference between OCT, CHX, NaOCl, and water groups (p > .05), and these groups showed higher smear layer values than NaOCl + EDTA and OCT + EDTA groups (p < .05). There was no significant difference between NaOCl + EDTA and OCT + EDTA groups (p > .05). It was concluded that OCT used as a single root canal irrigant presented poor cleaning capacity and could be used in association with a final irrigation with EDTA to obtain smear layer removal.     

Designing optical glasses by machine learning coupled with a genetic algorithm

Engineering new glass compositions have experienced a sturdy tendency to move forward from (educated) trial-and-error to data- and simulation-driven strategies. In this work, we developed a computer program that combines data-driven predictive models (in this case, neural networks) with a genetic algorithm to design glass compositions with desired combinations of properties. First, we induced predictive models for the glass transition temperature (T_g) using a dataset of 45,302 compositions with 39 different chemical elements, and for the refractive index (n_d) using a dataset of 41,225 compositions with 38 different chemical elements. Then, we searched for relevant glass compositions using a genetic algorithm informed by a design trend of glasses having high n_d (1.7 or more) and low T_g (500 °C or less). Two candidate compositions suggested by the combined algorithms were selected and produced in the laboratory. These compositions are significantly different from those in the datasets used to induce the predictive models, showing that the used method is indeed capable of exploration. Both glasses met the constraints of the work, which supports the proposed framework. Therefore, this new tool can be immediately used for accelerating the design of new glasses. These results are a stepping stone in the pathway of machine learning-guided design of novel glasses.     

Single Molecule with Dual Function on Nanogold: Biofunctionalized Construct for In Vivo Photoacoustic Imaging and SERS Biosensing

Multimodal imaging provides complimentary information that is advantageous in studying both cellular and molecular mechanisms in vivo, which has tremendous potential in pre‐clinical research and clinical translational imaging. It is desirable to design probes for multimodal imaging that can be administered minimally but provides multifaceted information. Herein, we demonstrate the complementary dual functional ability of a nanoconstruct for molecular imaging in both photoacoustic (PA) and surface‐enhanced Raman scattering (SERS) biosensing simultaneously in tandem. To realize this, a group of NIR active organic molecules are designed and synthesized that possess both SERS and PA activity. Nanoconstructs realized by anchoring such molecules onto gold nanoparticles are demonstrated for targeting cancer biomarkers in vivo while providing complimentary information about biodistribution and targeting efficiency. In future, such nanoconstructs could play a major role in identifying surgical margins and also for disease monitoring in translational medicine.     

Effect of the root canal final rinse protocols on the debris and smear layer removal and on the push‐out strength of an epoxy‐based sealer

The aim of the present study was to evaluate the efficacy of QMiX, SmearClear, and 17% EDTA for the debris and smear layer removal from the root canal and its effects on the push‐out bond strength of an epoxy‐based sealer by scanning electron microscopy (SEM). Forty extracted human canines (n = 10) were assigned to the following final rinse protocols: G1‐distilled water (control), G2–17% EDTA, G3‐SmearClear, and G4‐QMiX. The specimens were submitted to a SEM analysis to evaluate the presence of debris and smear layer, respectively, in the apical or cervical segments. In sequence, forty extracted human maxillary canines with the root canals instrumented were divided into four groups (n = 10) similar to the SEM analysis study. After the filling with AH Plus, the roots were transversally sectioned to obtain dentinal slices. The specimens were submitted to a push‐out bond strength test using an electromechanical testing machine. The statistical analysis for the SEM and push‐out bond strength studies were performed using the Kruskal–Wallis and Dunn tests (α = 5%). There was no difference among the G2, G3, and G4 efficacy in removing the debris and smear layer (P > 0.05). The efficacy of these groups was superior to the control group. The push‐out bond strength values of G2, G3, and G4 were superior to the control group. The ability to remove the debris and smear layer by SmearClear and QMiX was as effective as the 17% EDTA. The final rinse with these solutions promoted similar push‐out bond strength values. Microsc. Res. Tech. 76:533–537, 2013. © 2013 Wiley Periodicals, Inc.     

Crystallization of porcine insulin with carbon dioxide as acidifying agent

Recent studies on the use of volatile electrolytes such as CO₂ in protein precipitation showed that these agents are a promising alternative to the conventional acids. This use of volatile electrolytes prevents protein denaturation due to local pH extremes, and saline effluent generation is greatly reduced, as the volatile electrolyte may be separated and recovered from solution just by pressure release. In this work, insulin was successfully crystallized in the presence of zinc using CO₂ as acidifying agent. The crystals obtained were rhombohedral, a common shape for porcine insulin crystals that contain zinc in their structure, and their average size varied with the mixing applied.