Reusable Floating Beads with Immobilized Xylose-Fermenting Yeast Cells for Simultaneous Saccharification and Fermentation of Lime-Pretreated Rice Straw

Novel bioreactor beads for simultaneous saccharification and fermentation (SSF) of lime-pretreated rice straw (RS) into ethanol were prepared. Genetically modified Saccharomyces cerevisiae cells expressing genes encoding xylose reductase, xylitol dehydrogenase, and xylulokinase were immobilized in calcium alginate beads containing inorganic lightweight filler particles to reduce specific gravity. For SSF experiments, the beads were floated in slurry composed of lime-pretreated RS and enzymes and incubated under CO₂ atmosphere to reduce the pH for saccharification and fermentation. Following this reaction, beads were readily picked up from the upper part of the slurry and were directly transferred to the next vessel with slurry. After 240 h of incubation, ethanol production by the beads was equivalent to that by free cells, a trend that was repeated in nine additional runs, with slightly improved ethanol yields. Slurry with pre-saccharified lime-pretreated RS was subjected to SSF with floating beads for 168 h. Although higher cell concentrations in beads resulted in more rapid initial ethanol production rates, with negligible diauxic behavior for glucose and xylose utilization, no improvement in the ethanol yield was observed. A fermentor-scale SSF experiment with floating beads was successfully performed twice, with repeated use of the beads, resulting in the production of 40.0 and 39.7 g/L ethanol. There was no decomposition of the beads during agitation at 60 rpm. Thus, this bioreactor enables reuse of yeast cells for efficient ethanol production by SSF of lignocellulosic feedstock, without the need for instruments for centrifugation or filtration of whole slurry.     

Monitoring behaviour of catabolic genes and change of microbial community structures in seawater microcosms during aromatic compound degradation

The behaviour of microbial populations responsible for degradation of the aromatic compounds, phenol, benzoate, and salicylate, and changes of microbial community structures in seawater microcosms were analysed quantitatively and qualitatively using MPN–PCR and PCR–DGGE. The purpose of the study was to investigate the ecology of the entire microbial community during bioremediation. Bacterial populations possessing catechol 1,2-dioxygenase (C12O) DNA were evidently the primary degraders of phenol and benzoate, but others possessing catechol 2,3-dioxygenase (C23O) DNA increased to enhance substrate degradation under high-load conditions when the substrates were present for long periods. However, salicylate degradation was evidently facilitated by specific bacterial populations possessing C23O DNA. PCR–DGGE analyses suggested that bacterial populations already relatively dominant in the original microcosm contributed to phenol degradation. Bacteria composing a minor fraction of the original population apparently increased and contributed to benzoate degradation. Bacterial populations possessing C23O DNA were responsible for salicylate degradation, however, and different degrading bacteria were evidently selected for, depending on the initial salicylate concentration. Microbial community structure tended to be simplified by aromatic compound degradation. Thus, microbial monitoring can elucidate the behaviour of bacterial populations responsible for aromatic compound degradation and be used to assess the effects of bioremediation on intact microbial ecosystems.     

Effect of Ultrasonic Irradiation on the Probability of Primary Nucleation of L-Arginine Hydrochloride

Most of the amino acids that are utilized as medical raw materials and food additives show polymorphism. To improve the functionality of amino acid crystals, an effective method of polymorph control is required in the crystallization process. Here, primary nucleation of L-arginine hydrochloride by ultrasonication was investigated. L-Arginine hydrochloride exhibits polymorphism, and it crystallizes into three distinct crystal forms. A cooling crystallization experiment was performed, and nucleation of each polymorph upon ultrasonication was observed. In addition, the nucleation was analyzed using the nucleation probability theory. The results indicate that ultrasonic irradiation would significantly induce the nucleation of a particular polymorph.     

Evaluation of Two Sets of Sorghum Bagasse Samples as the Feedstock for Fermentable Sugar Recovery via the Calcium Capturing by Carbonation (CaCCO) Process

Abstract: Sorghum bagasse samples from two sets (n6 and bmr6; n18 and bmr18) of wild-type and corresponding “brown midrib” (bmr) mutant strains of sweet sorghum were evaluated as the feedstock for fermentable sugar recovery via the calcium capturing by carbonation (CaCCO) process, which involves Ca(OH)₂ pretreatment of bagasse with subsequent neutralization with CO₂ for enzymatic saccharification. Saccharification tests under various pretreatment conditions of the CaCCO process at different Ca(OH)₂ concentrations, temperatures or residence periods indicated that bmr strains are more sensitive to the pretreatment than their counterparts are. It is expected that variant bmr6 is more suitable for glucose recovery than its wild-type counterpart because of the higher glucan content and better glucose recovery with less severe pretreatment. Meanwhile, bmr18showed higher scores of glucose recovery than its counterpart did, only at low pretreatment severity, and did not yield higher sugar recovery under the more severe conditions. The trend was similar to that of xylose recovery data from the two bmr strains. The advantages of bmr strains were also proven by means of simultaneous saccharification and fermentation of CaCCO-pretreated bagasse samples by pentose-fermenting yeast strain Candida shehatae Cs 4R. The amounts needed for production of 1 L of ethanol from n6, bmr6, n18, and bmr18samples were estimated as 4.11, 3.46, 4.03, and 3.95 kg, respectively. The bmr strains seem to have excellent compatibility with the CaCCO process for ethanol production, and it is expected that integrated research from the feedstock to bioprocess may result in breakthroughs for commercialization.     

改定JASS 5における再生骨材コンクリ一トの規定の概要

日本建築学会建築工事標準仕様書JASS 5鉄筋コンクリート工事が2009年2月に大改定された.今回の改定では、新技術の取込みはもとより、エコセメントや再生骨材コンクリートの節の新設などによる環境配慮への取組みの強化、かぶり厚さなどの規定の検査方法の充実、計画供用期間の級の超長期への対応や耐久性向上にかかわる乾燥収縮率*ヤング係数*許容ひび割れ幅などのコンクリートの品質基準の設定、調合強度の定め方の合理化を目指した構造体強度補正値(S値)の適用の拡大など、きわめて多岐にわたっている.また、水密コンクリートをはじめ特別な仕様のコンクリートについて、より実情に即した形で規定の充実が図られている.この報告は、そのうち、再生骨材コンクリートに関する規定について紹介する.     

Fast drive of displacement magnification mechanism with flexure hinge using loading type impact damper

A displacement magnification mechanism which uses flexure motion guide using elastic hinges can realize smooth frictionless motion but has poor vibration damping capability. An impact damper is a damping mechanism which uses collision energy to dissipate vibration energy. If the damper is used for vibration control of the flexure mechanism, it may be able to dissipate unexpected vibration without killing the merits of the flexure mechanism. In the paper, a loading type impact damper is applied to settle down transient vibration of a displacement magnification mechanism. We investigate differences of damping effect by setting conditions of the damper. It is shown that the impact damper can eliminate residual vibration at step response effectively without steady state error. The experimental displacement magnification mechanism with impact damper can settle down less than 1/5 of the response without the damper under appropriate setting conditions. Influence of natural frequency ratio between damper and displacement magnification mechanism is investigated. Influences of indentation at impact point are also examined.     

Electron-beam doping-electron radiation effects in impurity overlayers and semiconductor substrates

3-9 MeV electrons were used to introduce impurity Ge atoms into Si wafers from Ge sheets, which are in contact with a Si surface at 20-60‡C in water bath. Concentration-dependent diffusivities of ∼10-18-10^-14 cm²sec^-1 for Ge in Si were measured. Activation energies of sputtering yield for Ge and of the diffusivity of Ge in Si are estimated to be ∼0.3 eV and ∼0.58 eV, respectively. In a case of hot (∼250‡C) irradiation in ∼1x10^-3 Torr vacuum, also the similar concentration profiles of impurity atoms in the substrates were observed.     

Factors affecting soluble selenium removal by a selenate-reducing bacterium Bacillus sp. SF-1

High concentrations of soluble selenium, selenate and selenite, have acute and chronic toxicity toward living things. With the aim of developing a biological process for selenium removal, the effects of a variety of parameters on the reduction of soluble selenium by a Bacillus sp. strain SF-1, which is capable of reductively transforming selenate into selenite and, subsequently, into nontoxic insoluble elemental selenium, were studied. The bacterial strain could effectively reduce 20 mM of selenate to selenite and 2 mM of selenite to elemental selenium in the presence of an appropriate carbon source and in the absence of oxygen. The reduction rate of selenate to selenite was much higher than that of selenite to elemental selenium, resulting in the transient accumulation of selenite during selenate reduction. The selenate reduction rate increased with increases in the selenate concentration up to 20 mM, while the rate of selenite reduction decreased sharply at selenite concentrations of more than 2 mM. The elemental selenium transformed from selenate via selenite was found both inside and outside the cells. Bacillus sp. SF-1 was able to utilize a variety of organic acids or sugars as a carbon source in selenate reduction. Although the copresence of sulfate did not inhibit selenate reduction, it was completely inhibited by some other oxyanions, including nitrate. A model sequencing batch system using the bacterial strain was developed and exhibited good performance in the treatment of wastewater containing high concentrations of selenate.     

Who wins when price information is more ubiquitous? An experiment to assess how infomediaries influence price

Internet retailers often make use of price search services (infomediaries) that have the effect of reducing consumer search and expanding seller market presence. Research on price and advertising suggests that this may not be a profitable strategy. We develop an experimental posted-offer market to estimate the impact of infomediaries on price of homogenous goods. We analyze panel data from a range of market conditions that address how infomediaries services affect both seller-level offered price as well as market-level transacted price. We find that, while sellers attempt to extract higher prices through a higher initial offer price when using an infomediary, they fail to successfully collect it; transacted prices remain largely unchanged. As a consequence the benefits of infomediaries fall primarily to the buyer who faces largely unchanged transacted prices, and substantially reduced search costs. Search costs are, in essence shifted to the seller. Sellers who participate in this sort of price comparison should be aware that they are following a high-volume/low profit per unit strategy.