In Vivo Albumin-Binding of a C-Functionalized Cyclam Platform for 64Cu-PET/CT Imaging in Breast Cancer Model

An improved glucose-chelator-albumin bioconjugate (GluCAB) derivative, GluCAB-2^Mal, has been synthesized and studied for in vivo ⁶⁴Cu-PET/CT imaging in breast cancer mice models together with its first-generation analogue GluCAB-1^Mal. The radioligand works on the principle of tumor targeting through the enhanced permeability and retention (EPR) effect with a supportive role played by glucose metabolism. [⁶⁴Cu]Cu-GluCAB-2^Mal (99 % RCP) exhibited high serum stability with immediate binding to serum proteins. In vivo experiments for comparison between tumor targeting of [⁶⁴Cu]Cu-GluCAB-2^Mal and previous-generation [⁶⁴Cu]Cu-GluCAB-1^Mal encompassed microPET/CT imaging and biodistribution analysis in an allograft E0771 breast cancer mouse model. Tumor uptake of [⁶⁴Cu]Cu-GluCAB-2^Mal was clearly evident with twice as much accumulation as compared to its predecessor and a tumor/muscle ratio of up to 5 after 24 h. Further comparison indicated a decrease in liver accumulation for [⁶⁴Cu]Cu-Glu-CAB-2^Mal.     

Fat Distribution and Lipid Profile of Young Adults with Congenital Adrenal Hyperplasia Due to 21-Hydroxylase Enzyme Deficiency

We aimed to compare detailed fat distribution and lipid profile between young adults with congenital adrenal hyperplasia due to 21-hydroxylase enzyme deficiency and a control group. We also verified independent associations of treatment duration and daily hydrocortisone dose equivalent (HDE) with lipid profile within patients. This case–control study included 23 patients (7 male and 16 female) matched by an age range of young adults (18–31 years) with 20 control subjects (8 male and 12 female). Dual energy X-ray absorptiometry was used to measure the fat distribution. Male patients demonstrated elevated indices of fat mass for total (7.7 ± 2.1 vs. 4.5 ± 1.3 kg/m², p = 0.003), trunk (4.0 ± 1.2 vs. 2.2 ± 0.8 kg/m², p = 0.005), android (0.63 ± 0.24 vs. 0.32 ± 0.15 kg/m², p = 0.008), gynoid (1.34 ± 0.43 vs. 0.74 ± 0.24 kg/m², p = 0.005), arm (0.65 ± 0.16 vs. 0.39 ± 0.10 kg/m², p = 0.009), and leg regions (2.7 ± 0.8 vs. 1.6 ± 0.4 kg/m², p = 0.005) than the control group, but not in females. However, female patients demonstrated elevated ratio of low-density lipoprotein cholesterol to high-density lipoprotein cholesterol (1.90 ± 0.46 vs. 1.39 ± 0.47, p = 0.009) than the control group, but not in males. Total fat mass was inversely correlated with total testosterone (r = −0.64, p = 0.014) and positively correlated with leptin in males (r = 0.75, p = 0.002). An elevated daily HDE (β = 0.43, p = 0.038 and β = 0.47, p = 0.033) and trunk to total fat mass ratio (β = 0.46, p = 0.025, and β = 0.45, p = 0.037) were independently correlated with impaired lipid profile markers. Although there is no altered lipid profile, male patients demonstrated an increased fat distribution. However, female patients presented with an impaired lipid profile marker but demonstrated close values of normal fat distribution. Interestingly, the dose of glucocorticoid therapy can have some role in the lipid mechanisms.     

A theoretical and experimental study of phosphate ester inhibitors for AISI 1018 in carbon dioxide-saturated 3.5 wt% NaCl solution

Phosphate ester was investigated as a corrosion inhibitor for AISI 1018 carbon steel in carbon dioxide-saturated chloride solutions at different temperatures and pressures. The corrosion tests were realized by electrochemical techniques, weight loss measurements, bubble tests, and a high-pressure/high-temperature autoclave system. The corrosion tests demonstrated that the investigated molecule is an excellent corrosion inhibitor. The inhibiting effect is even bigger at high pressure and temperature than at atmospheric pressure and room temperature. The thermodynamic parameters were calculated and determined to obey the Langmuir isotherm. Polarization studies revealed that the evaluated inhibitor is a mixed type.     

Polymorphism in Gd2Ge2O7 ceramics: Structural,vibrational, and optical features

In this work, Gd₂Ge₂O₇ polymorphs were obtained by solid-state reactions at 1100–1300 °C. Structural and vibrational features were investigated by X-ray diffraction and Raman spectroscopy. For the triclinic (space group P1) polymorph, all the predicted phonons were discerned in perfect agreement with the group theory calculations, while for the tetragonal polymorph (space group P4₁2₁2), 53 bands of the 81 predicted modes could be identified and characterized. The Gd³⁺ 4f-4f electronic transitions were investigated by diffuse reflectance spectroscopy in the range 200–340 nm. By applying the Kubelka-Munk function, it was possible to determine the bandgap values for all ceramics studied. The tetragonal polymorph exhibited higher bandgap values (5.88 eV) than the triclinic one (5.59 eV), which are both more energetic than other pyrochlore polymorphs reported in the literature. The results indicate that the presence of polymorphism in Gd₂Ge₂O₇ ceramics can be used to produce tailor-made materials since their crystal structures have a strong influence on their optical properties. Consequently, these properties could be used to tuning the optical properties of Gd-containing materials to sensitize and transfer energy to other luminescent lanthanide ions, aiming for innovative applications.     

Evaluation of small-scale combustion of an insensitive high explosive formulation containing 3-nitro-1,2,4-triazol-5-one (NTO), 2,4-dinitroanisole (DNAN), and 1,3,5-trinitroperhydro-1,3,5-triazine (RDX)

ABSTRACT

Energetic materials are often disposed by open-burning or open-detonation as it is a cost-effective and efficient means of destroying explosive material, and often minimizes the need to transport hazardous explosives to treatment facilities. This practice is often scrutinized for the negative environmental impact of the odorous and unsightly toxic gaseous emissions as well as the resulting deposition residues, which often contain unburned energetic materials. With the increasing use of Insensitive High Explosive compositions in munitions, it is essential that the potential environmental impact of their disposal is assessed before their extensive use to prevent the kind of contamination incidents experienced with legacy explosives. Therefore, the aim of this work was to develop a controlled laboratory experiment to identify the gaseous emissions and the energetic material residues that are generated through the combustion of the IHE components 3-nitro-1,2,4-triazol-5-one (NTO), 2,4-dinitroanisole (DNAN), and 1,3,5-trinitroperhydro-1,3,5-triazine (RDX). A sealed vial containing small (mg) quantities of energetic material was heated until the energetic material combusted. Gas chromatography/mass spectrometry (GCMS) was used to calculate the oxygen consumption and to identify the gases that were generated. The solid residues were analyzed by high-performance liquid chromatography (HPLC) to quantify unburned energetic material. Results showed that DNAN was the most resistant to burning, thus leaving significant quantities of unreacted starting material in the vial. An interesting observation for the IHE formulation was that DNAN also inhibited the combustion of NTO and RDX. The gases emitted during the open burning of IHE components and mixtures included CO, CO₂, and N₂O as expected, but the proportions differed when the components and mixture were compared, reflecting the influence of DNAN on the burning behavior. From our data, we concluded that open-burning DNAN-based formulations is an environmentally unfavorable waste-management practice for the disposal of IHEs mainly due to generation of solid residues as well as unburnt DNAN.     

Biodegradation of poly(lactic acid)—cassava bagasse composites produced by injection molding

Neat poly (lactic acid) (PLA) and PLA/cassava bagasse (CB) composites were used to produce seedling tubes by extrusion and injection molding. The tubes were buried in simulated soil, and their biodegradation was investigated by weight loss, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). After 180 days, the composites' biodegradation was higher than neat PLA material, and the higher the CB content, the higher the biodegradation, which caused fissures and voids in the material. The biodegradation of PLA/CB composites increased the phosphorus content in the soil after 180 days. Composites of PLA with CB, an abundant agro-industrial residue in Brazil, are promising because they can reduce the environmental impact due to CB's proper destination, and the composites' costs and biodegradation are faster than pure PLA material. Both the faster biodegradation of the tube and the higher P content are advantageous for seedling tubes.     

Touch sensor and photovoltaic characteristics of CuSbS2 thin films

Spin-coated chalcostibite CuSbS₂ thin films (≈500 nm thick) were fabricated and the influence of the drying temperature on the structural, morphological, optical and thermoelectric properties of the films was investigated. Crystalline phase-pure chalcostibite has been obtained for the films dried at 180 °C and 210 °C, while below 180 °C these films are partially amorphous. Surprisingly, at drying temperature of 240 °C, a Cu_xS secondary phase appeared. The increase of the drying temperature leads to the increase of the particle size and the decrease of the optical band gap, which is interesting for optoelectronic applications. The highest power factor value was achieved for the film dried at 210 °C, due to the inexistence of secondary phases, which allowed realizing a stable thermoelectric touch sensor with a V_signal/_noise of 5. In addition, this film was tested as a photovoltaic (PV) device and a power conversion efficiency (PCE) of 0.030% with an open-circuit voltage (V_OC) of 0.36 V, a short-circuit current density (J_SC) of 0.278 mAcm^?2 and a fill factor (FF) of 0.27 were obtained. Therefore, this work evidences a pathway toward developing bi-functional devices with simultaneously thermoelectric touch sensor and photovoltaic functions.     

A computational literature review of football performance analysis through probabilistic topic modeling

This research aims to illustrate the potential use of concepts, techniques, and mining process tools to improve the systematic review process. Thus, a review was performed on two online databases (Scopus and ISI Web of Science) from 2012 to 2019. A total of 9649 studies were identified, which were analyzed using probabilistic topic modeling procedures within a machine learning approach. The Latent Dirichlet Allocation method, chosen for modeling, required the following stages: 1) data cleansing, and 2) data modeling into topics for coherence and perplexity analysis. All research was conducted according to the standards of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses in a fully computerized way. The computational literature review is an integral part of a broader literature review process. The results presented met three criteria: (1) literature review for a research area, (2) analysis and classification of journals, and (3) analysis and classification of academic and individual research teams. The contribution of the article is to demonstrate how the publication network is formed in this particular field of research, and how the content of abstracts can be automatically analyzed to provide a set of research topics for quick understanding and application in future projects.

     

Boccia game simulator: Serious game adapted for people with disabilities

Integration in the world of sport is one way for individuals with disabilities or motor disorders to feel more socially integrated, independent, and confident. Boccia is a Paralympic sport, which is increasingly getting more attention around the world. These facts have contributed to the objectives of this work. Including it in the serious games category enables to develop and rehabilitate the cognitive capabilities. The main focus was BC3 classification athletes (users with limited motor characteristics that require the use of an assistive device—a ramp, in this case). This paper describes a realistic Boccia game simulator adapted for people with disabilities that integrates a set of features that includes real physics and social features. These features can be used to enhance the interest of nonpractitioners of the sport and to improve the training conditions. The official Boccia regulation was added to the design of the simulator. The usability and approximation to the reality of the simulator were tested and validated based on the tests performed and data collected via a survey of users with no motor or psychological disorders. Realism and usability rating was almost excellent, and good results were achieved at the assessment of the game experience.     

Linear regression-based multifidelity surrogate for disturbance amplification in multiphase explosion

Structural and Multidisciplinary Optimization - When simulations are very expensive and many are required, as for optimization or uncertainty quantification, a way to reduce cost is using...