Combustion synthesis of AlN doped with carbon and oxygen

Carbon-and-oxygen-doped AlN specimens were prepared by combustion synthesis using Al, graphite, and AlN. Graphite addition changed the product color from white to blue. By XRD, the lattice constant increased slightly with increasing carbon content. Blue AlN powder was synthesized with a molar ratio of the diluent AlN of 0.2-0.5 with a fixed graphite content of 0.05. At an AlN molar ratio exceeding 0.6, carbon was not successfully incorporated due to the lower reaction temperature. Calcination at 800°C in air removed residual graphite without changing the crystal structure or product color. Oxygen, nitrogen, and carbon analyses revealed that blue AlN powders contained 0.45-0.54 mass% carbon and 1.4-1.6 mass% oxygen, while the undoped AlN contained 0.021 mass% carbon and 0.94 mass% oxygen. The origin of the white-to-blue color change was investigated via reflection measurements. Blue AlN exhibits an absorption peak at 634 nm (1.96 eV). From first-principles electronic structure calculations, the C-doped AlN and carbon-and-oxygen-doped AlN with a 1:1 ratio could be classified as p-type, whereas the O-doped AlN and 1:3 carbon-and-oxygen-doped AlN were n-type. One reason for the absorption peak at 634 nm may be a transition from the conduction band to an upper unoccupied state. These results suggest the possible control of optical and electronic properties of AlN via carbon-and-oxygen doping.     

Phragmites australis: a novel biosorbent for the removal of heavy metals from aqueous solution

Reed (Phragmites australis), a commonly used macrophyte in the wetlands constructed for water purification, was investigated as a new biosorbent for the removal of Cu(2+), Cd(2+), Ni(2+), Pb(2+) and Zn(2+) from aqueous solution. The metal adsorption capacity of reed biomass was improved significantly by water-wash, base- and acid-treatment. The maximum sorption of NaOH-pretreated reed biomass was observed near neutral pH for Cu(2+), Cd(2+), Ni(2+) and Zn(2+), while that for Pb(2+) was from an acidic range of pH 4.0 or higher. The maximum metal adsorption capacity on a molar basis assumed by Langmuir model was in the order of Cu(2+)>Ni(2+)>Cd(2+)>Zn(2+)>Pb(2+). Reed biosorbent showed a very high adsorption affinity value, which helps predict its high ability to adsorb heavy metals at low concentration. Desorption of heavy metals and regeneration of the biosorbent was attained simultaneously by acid elution. Even after three cycles of adsorption-elution, the adsorption capacity was regained completely and the desorption efficiency of metal was maintained at around 90%.     

Compression molding and melt‐spinning of the blends of poly(lactic acid) and poly(butylene succinate‐co‐adipate)

Poly(lactic acid) (PLA) is a biobased polymer made from biomass having high mechanical properties for engineering materials applications. However, PLA has certain limited properties such as its brittleness and low heat distortion temperature. Thus, the aim of this study is to improve toughness of PLA by blending with poly(butylene succinate‐co‐adipate) (PBSA), the biodegradable polymer having high toughness. Polymer blends of PLA and PBSA were prepared using a twin screw extruder. The melt rheology and the thermal property of the blends were examined. Further the blends were fabricated into compression molded parts and melt‐spun fiber and were subjected to tensile and impact tests. When the PBSA content was low, PBSA phase was finely dispersed in the PLA matrix. On the other hand, when the PBSA content was high, this minor phase dispersed as a large droplet. Mechanical properties of the compression molded parts were affected by the dispersion state of PBSA minor component in PLA matrix. Impact strength of the compression molded parts was also improved by the addition of soft PBSA. The improvement was pronounced when the PBSA phase was finely dispersed in PLA matrix. However, the mechanical property of the blend fibers was affected by the postdrawing condition as well as the PBSA content. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41856.     

A consistent grayscale‐free topology optimization method using the level‐set method and zero‐level boundary tracking mesh

This paper proposes a level‐set based topology optimization method incorporating a boundary tracking mesh generating method and nonlinear programming. Because the boundary tracking mesh is always conformed to the structural boundary, good approximation to the boundary is maintained during optimization; therefore, structural design problems are solved completely without grayscale material. Previously, we introduced the boundary tracking mesh generating method into level‐set based topology optimization and updated the design variables by solving the level‐set equation. In order to adapt our previous method to general structural optimization frameworks, the incorporation of the method with nonlinear programming is investigated in this paper. To successfully incorporate nonlinear programming, the optimization problem is regularized using a double‐well potential. Furthermore, the sensitivities with respect to the design variables are strictly derived to maintain consistency in mathematical programming. We expect the investigation to open up a new class of grayscale‐free topology optimization. The usefulness of the proposed method is demonstrated using several numerical examples targeting two‐dimensional compliant mechanism and metallic waveguide design problems. Copyright © 2014 John Wiley & Sons, Ltd.     

General topology optimization method with continuous and discrete orientation design using isoparametric projection

A general topology optimization method, which is capable of simultaneous design of density and orientation of anisotropic material, is proposed by introducing orientation design variables in addition to the density design variable. In this work, the Cartesian components of the orientation vector are utilized as the orientation design variables. The proposed method supports continuous orientation design, which is out of the scope of discrete material optimization approaches, as well as design using discrete angle sets. The advantage of this approach is that vector element representation is less likely to fail into local optima because it depends less on designs of former steps, especially compared with using the angle as a design variable (Continuous Fiber Angle Optimization) by providing a flexible path from one angle to another with relaxation of orientation design space. An additional advantage is that it is compatible with various projection or filtering methods such as sensitivity filters and density filters because it is free from unphysical bound or discontinuity such as the one at θ = 2π and θ = 0 seen with direct angle representation. One complication of Cartesian component representation is the point‐wise quadratic bound of the design variables; that is, each pair of element values has to reside in a given circular bound. To overcome this issue, we propose an isoparametric projection method, which transforms box bounds into circular bounds by a coordinate transformation with isoparametric shape functions without having the singular point that is seen at the origin with polar coordinate representation. A new topology optimization method is built by taking advantage of the aforementioned features and modern topology optimization techniques. Several numerical examples are provided to demonstrate its capability. Copyright © 2014 John Wiley & Sons, Ltd.     

Barosensitivity in Saccharomyces cerevisiae is Closely Associated with a Deletion of the COX1 Gene

High hydrostatic pressure causes physical stress to microorganisms; therefore, this technology may be applied to food pasteurization without introducing the unfavorable effects of thermal denaturation. However, its application is limited to high‐value foods because the treatment requires a robust steel vessel and expensive pressurization equipment. To reduce these costs, we studied the pasteurization of Saccharomyces cerevisiae using relatively moderate high‐pressure levels. A mutant strain isolated by ultraviolet mutagenesis showed significant loss of viability under high‐pressure conditions. Gene expression analysis of the mutant strain revealed that it incurred a deletion of the COX1 gene. Our results suggest that the pressure‐sensitivity can readily be introduced into industrial/food microorganisms by complementing a COX1 deleted mitochondria.     

Well‐Defined End‐Functionalized Conjugated Polymers/Oligomers Exhibiting Unique Emission Properties through the End Groups: The Exclusive Synthesis by Combined Olefin Metathesis with Wittig‐type Coupling

Acyclic diene metathesis polymerization using ruthenium–carbene catalysts affords defect‐free, high molecular weight poly(arylene vinylene)s containing all trans olefinic double bonds. The exclusive end‐functionalization in the resultant poly(fluorene vinylene)s or poly(phenylene vinylene)s can be attained by treating the vinyl end groups using a molybdenum–alkylidene catalyst/reagent (through olefin metathesis) followed by addition of various aldehydes (Wittig‐type coupling). Some of these end‐modified conjugated materials display unique emission properties, which are different from the original ones, through an interaction (energy transfer or structural change in the excited state) between the conjugated main chain and the end groups [oligo(thiophene)s, F‐BODIPY, etc.]. Exclusive synthesis of well‐defined, all‐trans end‐functionalized oligo(2,5‐dialkoxy‐1,4‐phenylene vinylene)s [(oligo(phenylene vinylene), alkoxy = O(CH₂)₂OSiⁱ Pr₃, up to 31 repeat units] is demonstrated by adopting a stepwise synthetic approach (olefin metathesis and the subsequent Wittig‐type cleavage). It is clearly demonstrated that their optical properties (especially the fluorescence spectra including photoluminescence quantum yields) are strongly affected by the end groups as well as the conjugation repeat units.     

Dimeric C34 Derivatives Linked through Disulfide Bridges as New HIV-1 Fusion Inhibitors

C34, a 34-mer fragment peptide, is contained in the HIV-1 envelope protein gp41. A dimeric derivative of C34 linked through a disulfide bridge at its C terminus was synthesized and found to display potent anti-HIV activity, comparable with that of a previously reported PEGylated dimer of C34REG. The reduction in the size of the linker moiety for dimerization was thus successful, and this result might shed some light on the mechanism of the suppression of six-helix bundle formation by these C34 dimeric derivatives. Addition of a Gly-Cys(CH₂CONH₂)-Gly-Gly motif at the N-terminal position of a C34 monomeric derivative significantly increased the anti-HIV-1 activity. This moiety functions as a new pharmacophore, and this might provide a useful insight into the design of potent HIV-1 fusion inhibitors.