Advanced flaw production method for in-service inspection qualification mock-ups

One of the key issues in in-service inspection qualification is the representativeness of the defects used in qualification specimens. The best representativeness is achieved with realistic defects. However, present specimen production techniques have some significant weaknesses, such as unrealistic defects or additional alterations induced in the surrounding material. Specimens manufactured, for example, by weld implantation or with weld solidification defects always result in one or more extra weld interfaces. These interfaces can be detected by NDT. To overcome problems with the current specimens, a new defect manufacturing technique was developed. The new technique produces natural, representative defects without introducing additional weld metal or other unwanted alterations to the specimen.The new method enables artificial production of single, separate fatigue cracks by thermal loading. The method is based on a natural thermal fatigue damage mechanism and enables production of real cracks directly into the samples. Cracks are produced without welding or machining and without any preliminary surface treatment or artificial initiator such as a notch or a precrack. Single crack or a network of cracks can be induced into the base material, welded areas, HAZ, weld claddings, threaded areas, T-joints, etc. The location, orientation and size of produced cracks can be accurately controlled. Produced cracks can be used to simulate different types of service-induced cracks such as thermal fatigue, mechanical fatigue and stress corrosion cracks. It is shown that artificially produced thermal fatigue cracks correspond well with the real, service-induced cracks and overcome the problems of traditional qualification specimen manufacturing techniques.     

Reaction engineering studies in a polytropic fixed-bed reactor over a highly active and selective catalyst for oxidative methane coupling

The oxidative coupling of methane (OCM) was carried out in a polytropic fixed-bed reactor applying a Zr/La/Sr catalyst developed by the Neste company. Over this catalyst the OCM reaction follows a complex reaction scheme which includes primary parallel reaction steps to CO, CO₂ and C₂H₆ and consecutive reactions of ethane to ethylene or CO_x. Yield of higher hydrocarbons C₂₊ obtained with this catalyst strongly depended on reaction conditions, i.e. low partial pressures of methane and oxygen obtained by diluting the feed gas with nitrogen and high reaction temperatures promoted C₂₊ selectivity and yield. The maximum yield amounted to 21.4% (20 Vol.-% CH₄, 9 Vol.-% O₂, 71 Vol.-% N₂, T = 860°C; X_CH4 = 41.8%, S = 52.5%). This result belongs to the highest yields reported in the open literature.     

Influence of titanium dioxide on crystallization behavior of an ethylene–propylene copolymer

Crystallization of an ethylene–propylene copolymer (E/P) filled with diverse weight percentages of titanium dioxide (TiO₂) was performed under isothermal and nonisothermal conditions to investigate the influence of the inorganic substance on the nucleation and growth mechanisms of the matrix. The overall and radial crystallization rates of the composite materials were measured using, respectively, differential scanning calorimetry (DSC) and optical microscopy. The nucleation density of E/P spherulites as a function of composition was investigated by scanning electron microscopy (SEM), revealing a nucleating effect of TiO₂. A comparison between the spherulitic texture of specimens showed a higher fineness of the composites relative to the neat matrix, whereas no changes of surface nucleation density were appreciable among composites within the explored compositional range. The thermal behavior is discussed in the light of the enhanced thermal conductivity of polymer composites, which conciliates the crystallization kinetics of the matrix, analyzed using the Avrami equation, to optical and SEM observations. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3409–3416, 2003     

Neural networks in process life cycle profit modelling

Changes in operational environment of the process industry such as decreasing selling prices, increased competition between companies and new legislation, set requirements for performance and effectiveness of the industrial production lines and processes. For the basis of this study, a life cycle profit (LCP) model of a pulp process was constructed using different kind of process information including chemical consumptions and production levels of material and energy flows in unit processes. However, all the information needed in the creation of relevant LCP model was not directly provided by information systems of the plant. In this study, neural networks was used to model pulp bleaching process and fill out missing information and furthermore to create estimators for the alkaline chemical consumption. A data-based modelling approach was applied using an example, where factors affecting the sodium hydroxide consumption in the bleaching stage were solved. The results showed that raw process data can be refined into new valuable information using computational methods and moreover to improve the accuracy of life cycle profit models.     

The effects of paints and moisture content on the indoor air emissions from pinewood (Pinus sylvestris) boards

The emissions of volatile organic compounds (VOCs) from building materials may significantly contribute to indoor air pollution, and VOCs have been associated with odor annoyance and adverse health effects. Wood materials together with coatings are commonly used indoors for furniture and large surfaces such as walls, floors, and ceilings. This leads to high surface-to-volume ratios, and therefore, these materials may participate remarkably to the VOC levels of indoor environment. We studied emissions of VOCs and carbonyl compounds from pinewood (Pinus sylvestris) boards of 10% and 16% moisture contents (MC) with three paints using small-scale test chambers (27 L). The emissions from uncoated pinewood and paints (on a glass substrate) were tested as references. The 28-day experiment showed that the VOC emissions from uncoated pinewood were lower from sample with 16% MC. Painted pinewood samples showed lower emissions compared to paints on glass substrate. Additionally, paints on 16% MC pinewood exhibited lower emissions than on drier 10% MC wood. The emissions from painted pinewood samples were dominated by paint-based compounds, but the share of wood-based compounds increased over time. However, we noticed differences between the paints, and wood-based emissions were clearly higher with the most permeable paint.     

Antioxidant activity of phenolic and phenylethanoid glycosides from Teucrium polium L

In the present study, the chemical composition and antioxidant activities of Teucrium polium L. (Lamiaceae) were assessed. Fractionation of methanol extract obtained from the aerial parts of T. polium yielded one new phenylethanoid glycoside, named poliumoside B, together with four known flavonoids, two iridoid glycosides and a known poliumoside. The structures of all of these compounds were elucidated on the basis of spectroscopic data from 1D and 2D NMR experiments and MS spectral analyses. The antioxidant activities of the crude extracts and of the isolated compounds were evaluated through tests such as DPPH radical-scavenging capability, reducing power, xanthine oxidase inhibitory effect and inhibition of linoleic acid peroxidation. The highest antioxidant activity was found in the n-butanol extract, which also contained active polyphenols, thus suggesting that this plant could be used as a source of natural molecules, to provide safe antioxidant additives and nutraceuticals. The structure–activity relationships of the isolated compounds are also discussed.     

A mathematical method to estimate the equilibrium melting temperature from growth rate data

The regime transitions analysis is subject to all the limitations of the ordinary least squares method which is generally applied to the linearized form of the Lauritzen-Hoffman equation. Therefore, polymers growth rate has to be measured in a sufficiently wide temperature range to ensure a reliable kinetic analysis based on the secondary nucleation theory. Furthermore, an accurate value of the equilibrium melting temperature has to be used in order to achieve trustworthy thermodynamics outcomes, although this quantity may be affected by a high uncertainty. Here a method is proposed in order to verify directly from growth rate data the use of the most reliable value of the equilibrium melting temperature. The method is based on the comparison between the derivatives of the growth rate functions calculated by the Lauritzen-Hoffman equation using the outcomes of the regime analysis.     

Adapting Web content to mobile user agents

In this article, we describe an adaptation proxy we developed as a part of a Kontti research project at VTT Information Technology that lets mobile users access Web content that's not directly targeted to mobile user agents. More and more content is now available on the Internet, and there's a growing need for mobile users to be able to access it. Thus the authors describe the adaptation proxy, which lets mobile users access Web content that's not directly targeted to user agents of mobile devices. The adaptation proxy can adapt Extensible Hypertext Markup Language (XHTML) documents into XHTML mobile profile (XHTML MP) and Wireless Markup Language (WML), and can perform media adaptation. At the system's core is an adaptation framework to which new source and target XML languages can be introduced with relatively little effort.