Detection of suspicious internet traffic based on differential analysis and logical rules

Journal of Computer Virology and Hacking Techniques - Internet services and web-based applications are used in important and sensitive areas such as e-commerce, e-learning, e-health care, and...     

Unexploited Thapsia garganica,Orlaya maritima,and Retama raetam Seeds: Potential Sources of Unsaturated Fatty Acid and Natural Antioxidants

Total lipid contents, fatty acid compositions, phenolic profiles and antioxidants activities of seeds from Thapsia garganica, Orlaya maritima, and Retama raetam were investigated. The oil values were more than 26 %, except seeds of R. raetam (ca. 3 %). Unsaturated fatty acids accounted for the majority of the fatty acids (more than 75 %). Oleic and linoleic acid were the predominant fatty acids. Total phenolic compounds (24–104 mg GAE g^?1 DR), total flavonoids (4–102 mg QE g^?1g DR), total tannins (28–85 mg GAE g^?1 DR) and condensed tannins (0.62–131 mg CE g^?1 DR) were also determined. The antioxidant activities using different assays were evaluated. The predominant detected classes were the phenolic acids (42–85 %) and the flavonoids (11–48 %). The major phenolic acids were caffeic, trans‐4‐hydroxy‐3‐methoxycinnamic, p‐coumaric, and gallic acid. The predominant flavonoids were quercetin, luteolin, naringin, apigenin, and kaempferol. This study brings attention to the medicinal importance of these species as a source of oil and antioxidant molecules.     

Optimization of nutrient-induced germination of Bacillus sporothermodurans spores using response surface methodology

Spores of Bacillus sporothermodurans are known to be contaminant of dairy products and to be extremely heat-resistant. The induction of endospore germination before a heat treatment could be an efficient method to inactivate these bacteria and ensure milk stability. In this study, the nutrient-induced germination of B. sporothermodurans LTIS27 spores was studied. Testing the effect of 23 nutrient elements to trigger an important germination rate of B. sporothermodurans spores, only d-glucose, l-alanine, and inosine were considered as strong independent germinants. Both inosine and l-alanine play major roles as co-germinants with several other amino acids. A central composite experimental design with three factors (l-alanine, d-glucose, and temperature) using response surface methodology was used to optimize the nutrient-induced germination. The optimal rate of nutrient-induced germination (100%) of B. sporothermodurans spores was obtained after incubation of spore for 60 min at 35 °C in presence of 9 and 60 mM of d-glucose and l-alanine, respectively. The results in this study can help to predict the effect of environmental factors and nutrients on spore germination, which will be beneficial for screening of B. sporothermodurans in milk after induction their germination. Moreover, the chosen method of optimization of the nutrient-induced germination was efficient in finding the optimum values of three factors.     

Optimization of pressure-induced germination of Bacillus sporothermodurans spores in water and milk

Bacillus sporothermodurans produces highly resistant endospores that can survive ultra-high-temperature treatment in milk. The induction of endospore germination before a heat treatment could be an efficient method to inactivate these bacteria and ensure milk sterility. In this work, the rate of spore germination of B. sporothermodurans LTIS27 was measured in distilled water after high-pressure treatments with varying pressure (50–600 MPa), treatment temperature (20–50 °C), pressure-holding time (5–30 min) and post-pressurization incubation time (30–120 min) at 37 °C or 4 °C. The results showed that pressure-induced germination was maximal (62%) after a treatment at 200 MPa and 20 °C and increased with pressure-holding time and post-pressurization incubation time. Treatment temperature had no significant effect on germination. A central composite experimental design with three factors (pressure, pressure-holding time, and post-pressurization incubation time) using response surface methodology was used to optimize the germination rate in distilled water and in skim milk. No factor interaction was observed. Germination was induced at lower pressure and was faster in milk than in distilled water, but complete germination was not reached. The optimum germination obtained with experimental data was 5.0 log cfu/mL in distilled water and 5.2 log cfu/mL in milk from 5.7 log cfu/mL of spores initially present in the suspension. This study shows the potential of using high hydrostatic pressure to induce the germination of B. sporothermodurans spores in milk before a heat treatment.     

Study of the Mechanical Properties of Fibers Extracted from Tunisian Agave americana L.

Agave americana L. fibers, the most abundant variety in Tunisia, have a quite important textile potential. This potential is demonstrated by studying the extraction of these fibers from leaves, their physical properties such us fineness or density and their mechanical behavior in tensile tests. In this work, results of a mechanical behavior study of fibers extracted from the Agave americana L. plant are presented. These results deal with the principal and mechanical characteristics of these fibers which are the strain at break, the elasticity modulus and the rupture facture. These results permitted to situate these fibers, compared to the other textile fibers, as materials that can be used in technical applications such as reinforcing composites or geotextile. In order to understand the mechanical properties of these fibers, a correlation study between the properties already cited and the fine structure was done. The obtained results showed that the mechanical properties of Agave americana L. fibers are closely related to the individual fibers deformations and to the natural matrix (lignin and gums) that are linked to these elementary fibers.     

An element-based formulation for ES-FEM and FS-FEM models for implementation in standard solid mechanics finite element codes for 2D and 3D static analysis

Edge-based and face-based smoothed finite element methods (ES-FEM and FS-FEM, respectively) are modified versions of the finite element method allowing to achieve more accurate results and to reduce sensitivity to mesh distortion, at least for linear elements. These properties make the two methods very attractive. However, their implementation in a standard finite element code is nontrivial because it requires heavy and extensive modifications to the code architecture. In this article, we present an element-based formulation of ES-FEM and FS-FEM methods allowing to implement the two methods in a standard finite element code with no modifications to its architecture. Moreover, the element-based formulation permits to easily manage any type of element, especially in 3D models where, to the best of the authors' knowledge, only tetrahedral elements are used in FS-FEM applications found in the literature. Shape functions for non-simplex 3D elements are proposed in order to apply FS-FEM to any standard finite element.     

Quantifying information transfer through a head-attached vibrotactile display: principles for design and control

Vibrotactile displays can extend the perception capabilities of visually impaired persons. Placing such devices on the head promises easy attachment and detachment without reducing other interaction abilities. However, the effectiveness of head-attached vibrotactile displays has never been thoroughly tested. This paper presents the results obtained from experiments with 22?subjects equipped with a display containing 12 coin-type motors equally spaced in a horizontal plane around the upper head region. Our display allowed single- as well as multimotor activation with up to six simultaneously active motors. We identified the minimum and comfort strength of vibrotactile stimulation, and measured the precision in perceiving the accurate number of active motors as well as the precision in localizing the stimuli on the head. While subjects identified the correct number of active motors in 94% of the cases when presented with only one active motor, this precision dropped to 40% for two and down to 5% for five simultaneously active motors. This strongly suggests to avoid multipoint stimulation even though the precision of localizing a position of a stimulus on the head is barely affected by the number of simultaneously active motors. Localization precision, however, varied significantly with the region of the head suggesting that the most front and back regions of the head should be avoided if high precision is required.     

Lipid Composition and Utilization in Early Stage Leptocephalus Larvae of Bonefish (Albula vulpes)

In order to encourage the survival of both captive and wild populations of bonefish (Albula vulpes), a deeper understanding of the species' early developmental characteristics is necessary. During ontogenesis, bonefish utilize lipids as a source of energy before the start of exogenous feeding. The goal of this study is to gain insight into the energetic needs of bonefish leptocephalus larvae in the post-hatch larval stage. Broodstock were collected in the wild and hormone induced. Spawning yielded eggs that were fertilized and were then incubated until hatching. Larval development was monitored throughout the duration of the trial until all larvae perished. Samples of larval tissue were taken to the lab for lipid analysis and composition was compared at different developmental stages. Larval lipid composition was significantly different across sample groups showing a change in lipid content related to development. After hatching, larvae gradually depleted wax esters-sterol ester (WE-SE) reserves over a period of 4 days, while simultaneously increasing hydrocarbon (HC). The role of WE-SE is seemingly tied to both buoyancy and energy reserves due to its high abundance immediately post-hatch and selective catabolism. As larvae weaned off of the nutrition provided by the yolk, exogenous feeding began to diversify lipid composition and overall lipid reserves were depleted. Future directions included the development of optimal larval feeds based on this analysis in order to gain more insight into the nutritional needs and requirements during the critical leptocephalus stages.