Nucleation and crystallization of Ba2Si3O8 spherulites in a barium aluminum silicate glass,and mechanical properties of the obtained glass-ceramics

The effect of spherulitic crystallization on the elastic moduli and fracture toughness of a barium aluminum silicate glass was investigated. The crystallization process results in Ba₂Si₃O₈ phase and is initiated from Ba rich nuclei. Nucleation is optimal in the 690-720 °C interval. Young’s modulus is increased by 12.5% when the glass-ceramic conversion is nearly complete. Nevertheless, as the size and the volume fraction of crystals are increased, some microcracking shows up upon cooling from the crystallization temperature. An optimal improvement of the fracture toughness (SEPB method) by 27 % is observed for a 49 % volume fraction of 5 to 10 μm large spherulites.     

Identification of rockfall source areas using the seed cell concept and bivariate susceptibility modelling

The objective of this research was to prepare a rockfall susceptibility map. Explorations were conducted in the Dubra?ina River basin (Croatia). The input data included a geological map, an orthophoto and a 1-m digital terrain model (DTM). After a talus inventory was prepared, the seed cell concept was applied to define the rockfall source areas. The contributing factors (predictors) of rockfalls were evaluated by the chi-squared test. The analysis confirmed the following predictors: CORINE land cover, lithology, slope, aspect, distance from a spring, distance from a road, distance from a fault, distance from a stream, and distance from the rock-soil geological boundary. A matrix pairwise comparison of the predictor ratings was used to define the most significant contributing factors. The predictors that affected the susceptibility map in the share of 86.3% were the slope (61.6%), lithology (13.4%), CORINE land cover (6.2%), and distance from the rock-soil geological boundary (5.1%). Two susceptibility maps were prepared: one using all nine contributing factors and another using the four most significant factors. The analysis showed that both maps were good, with the same areas under the receiver operating characteristic (ROC) curves. The map prepared with only four contributing factors can be considered a better map due to its more precise spatial definition of critical areas. It can be concluded that geological map, 1-m DTM and orthophoto provide enough data to prepare reliable rockfall susceptibility map. The application of the bivariate statistical zonation method called the “frequency ratio method” was proven to be successful. This research demonstrates that the application of the seed cell concept can be useful to speed up the process of rockfall source area detections in large research regions.

     

A novel inverse modeling control for piezo positioning stage

Journal of Mechanical Science and Technology - This paper focuses on the application of a novel inverse nonlinear autoregressive with exogenous input (NARX) structure and a fuzzy inference system...     

A methodology for estimating airborne virus exposures in indoor environments using the spatial distribution of expiratory aerosols and virus viability characteristics

This study investigated the feasibility of using the spatial distribution of expiratory aerosols and the viability functions of airborne viruses to estimate exposures to airborne viruses in an indoor environment under imperfectly mixed condition. A method adopting this approach was tested in an air-conditioned hospital ward. Artificial coughs were produced by aerosolizing a simulated respiratory fluid containing a known concentration of benign bacteriophage. The bacteriophage exposures estimated on the basis of the spatial aerosol distributions and its viability function were in reasonable agreement with those measured directly by biological air sampling and culturing. The ventilation flow and coughing orientation were found to play significant roles in aerosol transport, leading to different spatial distribution patterns in bacteriophage exposure. Bacteriophage exposures decreased with lateral distance from the infector when the infector coughed vertically upward. In contrast, exposures were constant or even increased with distance in the case of lateral coughing. The possibility of incorporating the proposed exposure estimation into a dose-response model for infection risk assessment was discussed. The study has also demonstrated the potential application of viability functions of airborne viral pathogens in exposure assessment and infection risk analysis, which are often unavailable in literature for some important communicable diseases. PRACTICAL IMPLICATIONS: The proposed method makes use of the viability function of the virus and the spatial distribution of the expiratory aerosols for virus exposure estimation. Spatial differences in aerosol distribution and its influences on virus exposure in an air space can be determined. Variations in infectious dose with carrier aerosol size could also be considered. The proposed method may serve as a tool for further investigation of ventilation design and infection control in clinical or other indoor environments.     

Comparison of particle-phase polycyclic aromatic hydrocarbons and their variability causes in the ambient air in Ho Chi Minh City, Vietnam and in Osaka, Japan, during 2005-2006

A comparative study of polycyclic aromatic hydrocarbons (PAHs) associated with particulate matter (TSP) in the ambient air in an urban area in Ho Chi Minh City, Vietnam and in Osaka, Japan was carried out from 2005 to 2006. The objective of this study was to investigate the environmental levels, emission sources, seasonal variations and health risk of eleven PAHs in the two cities, especially Ho Chi Minh City where air pollution is becoming a serious concern. The results showed that the concentrations of TSP and total PAHs were significantly higher in Ho Chi Minh City than levels in Osaka. The concentrations of 5- and 6-ring PAHs (BeP, BbF, BkF, BaP, BghiP and InP) were much higher in TSP samples in Ho Chi Minh City than in Osaka, accounting for 82% and 51% of total PAHs, respectively. These PAHs are known to be highly carcinogenic and mutagenic in humans. Vehicular emission is suggested as one of the main pollution sources of PAHs in both cities. Motorcycles and gasoline automobiles are suggested as the main emission sources of PAHs in Ho Chi Minh City, whereas diesel automobiles are the primary source in Osaka. Seasonal variations of PAHs were observed in this study; higher concentrations of PAHs were found in the rainy season (May-December) and lower concentrations corresponded to the dry season (February-April) in Ho Chi Minh City, while higher concentrations of PAHs were observed in the winter (November-January) in Osaka. The number of sunshine hours was an important meteorological factor affecting seasonal variations of PAHs in Ho Chi Minh City, while the temperature was a main factor causing the variations of PAHs in Osaka. The high BaP equivalent concentration of 5- and 6-ring PAHs even in the ambient air is an alarming signal for harmfulness to human health and environmental quality in Ho Chi Minh City.     

马尼托瓦克新型塔式起重机将在bauma China2014首次亮相

在bauma China2014上，马尼托瓦克将携两款新型Potain系列平头式塔机和1台Grove品牌KT890E型移动式越野起重机盛装亮相。Potain系列塔机是马尼托瓦克中国张家港工厂的最近创新成果。     

An adaptive clinical decision support system for serving the elderly with chronic diseases in healthcare industry

With the increasing ageing population worldwide, providing effective nursing care planning in nursing homes is important in meeting the expectations of elderly patients and in streamlining the healthcare information process, hence maintaining high‐quality services. Instead of the traditional manual nursing care planning formulation based on expert experience and subjective judgement, this paper describes an adaptive decision support system, namely, the cloud‐based nursing care planning system, to enable decision making in formulating nursing care strategies. By integrating cloud computing technology and the case‐based reasoning (CBR) technique, medical records and documents pertaining to the elderly can be captured in real time, whereas appropriate treatment plans based on past similar treatment records can be formulated. However, the current case adaptation processes in CBR rely on domain experts to modify retrieved cases, which may not satisfy the needs of the elderly. Therefore, text mining is integrated in the case adaptation process of CBR for extracting up‐to‐date medical information from the Internet so that its efficiency can be improved. By conducting a pilot study in a nursing home, it was shown that the time for formulating applicable treatment plans for elderly patients can be reduced, and the service satisfaction level can be enhanced.     

Indentation cracking and deformation mechanism of sodium aluminoborosilicate glasses

Developing less brittle oxide glasses is a grand challenge in the field of glass science and technology, as it would pave the way toward new glass applications and limit the overall raw material usage and energy consumption. However, in order to achieve this goal, more insight into the correlation between the chemical composition and material properties is required. In this work, we focus on the mechanical properties of quaternary sodium aluminoborosilicate glasses, wherein systematic changes in glass chemistry yield different resistances to indentation crack initiation. We discuss the origin of the composition dependence of indentation cracking based on an evaluation of the deformation mechanism taking place during the indentation event. To this end, we use a simple metric, the extent of indent side length recovery upon annealing, to quantify the extent of reversible volume deformation. Finally, we also compare the compositional trend in crack initiation resistance to that in crack growth resistance (fracture toughness), showing no simple correlation among the two.