Measurement of Young’s Modulus and Poisson’s Ratio of Thermal Barrier Coating Based on Bending of Three-Layered Plate

Thermal barrier coatings (TBCs) are used to protect the hot sections of gas turbine engines and airplane engines. A TBC system comprises a substrate, bond coat, and TBC topcoat. The development of an accurate method for determining the Young’s modulus and Poisson’s ratio of TBC using a multilayered specimen is of importance. In this study, we applied the bending theory of a laminated plate to a three-layered material and proposed models to determine the Young’s modulus and Poisson’s ratio of the TBC layer using the bending strain of the TBC system specimen. Three methods were developed by utilizing (i) the coating biaxial strain, (ii) substrate biaxial strain, or (iii) coating and substrate biaxial strains. Subsequently, we determined appropriate dimensions of the specimen and span by using three-dimensional finite element analysis, and numerically verified the usefulness of the three proposed methods. However, the Young’s modulus and Poisson’s ratio determined using the multilayered specimen with a substrate are sensitive to experimental errors. Therefore, we evaluated the sensitivity of the three proposed methods to experimental error, and we determined the most insensitive method among them. Finally, we experimentally demonstrated the usefulness of this method.     

Development of silicon wafer packaging technology for deep UV LED

This paper reports a deep‐ultraviolet LED (deep‐UV‐LED) package based on silicon MEMS process technology (Si‐PKG). The package consists of a cavity formed by silicon crystalline anisotropic etching, through‐silicon vias (TSVs) filled with electroplated Cu, bonding metals made of electroplated Ni/AuSn and a quartz lid for hermetic sealing. A deep‐UV LED die is directly mounted in the Si‐PKG by AuSn eutectic bonding without a submount. It has advantages in terms of size, heat dissipation, light utilization efficiency, productivity and cost over conventional AlN ceramic packages. We confirmed a light output of 30 mW and effective reflection on Si (111) cavity slopes in the Si‐PKG. Based on simulation, further improvement of the optical output is expected by optimizing DUV‐LED die mount condition.     

Process Intensification of Living Cationic Polymerization of Isobutylene by a Flow Reaction System

Increasing the reaction temperature of the living cationic polymerization of isobutylene is crucial for industrial production due to the cost of refrigeration. The reaction temperature increase was achieved with an accelerated reaction rate using a flow reaction system. The polymerization conditions, including the flow reactor design, were based on the results of kinetic studies. Utilizing a milli‐scale flow reactor, polyisobutylene, which has a narrow molecular weight distribution, was obtained within a considerably short residence time at a high temperature. Furthermore, it was confirmed that the value of M_w/M_n correlates with the product of the Reynolds number and the angle of collision.     

Evaluation of the containment vessel failure time from operator’s notifications during a severe accident

This paper aims at clarifying the potential and the limit of the method to surmise the timing of the containment vessel (CV) failure utilizing the Emergency Action Levels (EALs) issued as a nuclear operator’s notification in an early phase of the severe accident (SA). We analyzed the timings of the EALs issued in all kinds of the SA sequences of several PWR plant models by using the SA analysis code, MAAP. We found high correlations between the timing of SE41 (EAL issued at CV pressure of 0.5 design pressure) and the timing of the CV failure in the typical scenarios, e.g. over-pressure failures. We could therefore establish an evaluating method to estimate the time for a CV failure. This method has the potential to support the decision-making in nuclear emergency preparedness.     

Involvement of Cytokines in the Pathogenesis of Diabetic Macular Edema

Diabetic macular edema (DME) is a critical complication of diabetic retinopathy, a condition that arises from the breakdown of the blood–retinal barrier and the consequent increase in vascular permeability. Over the years, attempts have been made to treat DME by various approaches, including laser photocoagulation, steroid triamcinolone acetonide, and vitrectomy. However, treatment was unsatisfactory until research identified vascular endothelial growth factor (VEGF) as a factor in the pathogenesis of DME. Intraocular anti-VEGF agents show good efficacy in DME. Nevertheless, in some patients the condition recurs or becomes resistant to treatment, suggesting that other factors may be involved. Because inflammation and retinal hypoxia are seen in DME, research has examined the potential role of cytokines and other inflammatory mediators. In this review, we provide an overview of this research and describe feedback mechanisms that may represent a target for novel treatments.     

Effects of phenylenediamines and alkoxysilanes on gas transport properties of polyimide - silica hybrid membranes

Gas transport properties of polyimides (PIs) and their silica hybrids were investigated. The PIs synthesized with several methyl-substituted phenylenediamines were hybridized with silica via a sol–gel process with different alkoxysilanes. The prepared hybrid membranes showed controlled gas permselectivity, depending on the selected phenylenediamines and alkoxysilanes. It was worth noting that the hybrids prepared with tetraethoxysilane possessed improved CO₂ permselectivity with increasing silica content, which tended to exceed the upper-bound trade-off line. This fact suggested the additional formation of free volume holes especially favorable for the CO₂/CH₄ separation around the polymer/silica interfacial area.     

Impact of Dynamic Interlayer Interactions on Thermal Conductivity of Ca3Co4O9

The phonon thermal conductivity of misfit-layered Ca₃Co₄O₉ has been calculated by perturbed molecular dynamics using a classical force field. Detailed numerical analyses reveal that, in spite of its smaller cross-sectional area, the CoO₂ layer transports more heat than the thicker rock salt (RS) layer, although its local thermal conduction is more suppressed than in another layered cobaltite, Na _x CoO₂. The origins of these differences have been elucidated through careful examination of the atomic arrangements in each layer. Since thermal conduction in the RS layer can be reduced without deteriorating electronic properties for which the CoO₂ layer is responsible, it is suggested that the RS layer should be modified to further suppress the overall in-plane thermal conductivity. Computational experiments with increasing number of Ca–O planes in the RS layer showed the opposite trend to what can be predicted based on the misfit between two dissimilar layers. Further analyses to reveal the origin of these unexpected results provide yet another strategy to further decrease the thermal conductivity, namely to control the dynamic interference between atoms across the interface between two layers.     

Thermal Analysis for Package Cooling Technology Using Phase-Change Material by Using Thermal Network Analysis and CFD Analysis With Enthalpy Porosity Method

This paper describes a transient cooling technology for electronic equipments using phase-change material (PCM). The module is made of low-cost materials, yet it is designed to achieve a reasonably high level of heat transfer performance. Paraffin is used as the PCM. In previous our report, we can estimate the cooling performance of PCM by using a thermal network method, which cannot calculate melted PCM flow. In this paper, we consider the heat transfer phenomena of PCM module more deeply by using computational fluid dynamics (CFD) analysis with an enthalpy porosity method. By using this method, we can calculate phase-change phenomena and flow phenomena of melted PCM with CFD analysis. First, we briefly explain the results of the experiment and the thermal network analysis. Then we describe the details of CFD analysis with the enthalpy porosity method. In this calculation, melted PCM flow and heat absorption of latent heat can be analyzed. Therefore, we can discuss the reason why the thermal network analysis can estimate cooling performance of PCM module without dealing with melted PCM flow. The calculation results showed that natural convective flow of melted PCM affects the cooling performance of the PCM module. In the case where the PCM module is set vertically, high temperature and low temperature locations exist on the substrate. If several devices are cooled with the PCM module, device consuming the most power must be set in the lower part of the PCM module. From these results, we can conclude that no natural convective flow occurs in our experiment due to the shape of the PCM module.