Hydrogen production through dry reforming of biogas using a porous electrochemical cell: Effects of a cobalt catalyst in the electrode and mixing of air with biogas

This paper reports the performance of porous Gd-doped ceria (GDC) electrochemical cells with Co metal in both electrodes (cell No. 1) and with Ni metal in the cathode and Co metal in the anode (cell No. 2) for CO₂ decomposition, CH₄ decomposition, and the dry reforming reaction of a biogas with CO₂ gas (CH₄ + CO₂ → 2H₂ + 2CO) or with O₂ gas in air (3CH₄ +?1.875CO₂ +?1.314O₂ → 6H₂ +?4.875CO +?0.7515O₂). GDC cell No. 1 produced H₂ gas at formation rates of 0.055 and 0.33?mL-H₂/(min?m²-electrode) per 1?mL-supplied gas/(min?m²-electrode) at 600?°C and 800?°C, respectively, by the reforming of the biogas with CO₂ gas. Similarly, cell No. 2 produced H₂ gas at formation rates of 0.40?mL-H₂/(min?m²) per 1?mL-supplied gas/(min?m²) at 800?°C from a mixture of biogas and CO₂ gas. The dry reforming of a real biogas with CO₂ or O₂ gas at 800?°C proceeded thermodynamically over the Co or Ni metal catalyst in the cathode of the porous GDC cell. Faraday's law controlled the dry reforming rate of the biogas at 600?°C in cell No. 2. This paper also clarifies the influence of carbon deposition, which originates from CH₄ pyrolysis (CH₄ → C + 2H₂) and disproportionation of CO gas (2CO → C + CO₂), on the cell performance during dry reforming. The dry reforming of a biogas with O₂ molecules from air exhibits high durability because of the oxidation of the deposited carbon by supplied air.     

Site‐Selective Iron(III) Chloride‐Catalyzed Arylation of 4‐Aryl‐4‐methoxy‐2,5‐cyclohexadienones for the Synthesis of Polyarylated Phenols

The iron(III) chloride‐catalyzed Friedel–Crafts arylation of 4‐aryl‐4‐methoxy‐2,5‐cyclohexadienones, which were easily prepared by the phenyliodine(III) diacetate (PIDA)‐mediated oxidation of 4‐arylphenols in methanol, proceeded site‐selectively to form meta‐terphenyl (2,4‐diarylphenol) derivatives in good yields. The subsequent PIDA‐mediated oxidation and iron(III) chloride‐catalyzed Friedel–Crafts arylation of the resulting products gave the corresponding 2,4,6‐triarylphenol derivatives. The present method provides useful highly substituted polyarylated compounds.

     

Stabilization of a Power System Including Inverter‐Type Distributed Generators by a Virtual Synchronous Generator

The capacity of distributed generators (DGs) connected to the grid by inverters is growing year after year. The inverters are generally controlled by a phase locked loop (PLL) in order to achieve synchronization with the power system frequency. Power systems may become unstable as the capacity of the inverter‐type DGs continues to increase, because the inverter frequency is controlled just to follow the frequency determined by other synchronous generators. It has been suggested that inverters be controlled to behave like a synchronous generator. This concept is referred to as the virtual synchronous generator (VSG). In this paper, a control scheme for a VSG is presented, and the design method for the required energy storage and the capacity for grid stabilization control by a VSG is investigated by computer simulations.     

Well‐Defined Functional Linear Aliphatic Diblock Copolyethers: A Versatile Linear Aliphatic Polyether Platform for Selective Functionalizations and Various Nanostructures

Low‐temperature anionic ring‐opening homopolymerizations and copolymerizations of two glycidol derivatives (allyl glycidyl ether (AGE) and ethoxyethyl glycidyl ether (EEGE)) are studied using a metal‐free catalyst system, 3‐phenyl‐1‐propanol (PPA) (an initiator) and 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris‐(dimethylamino)phosphoranylidenamino]‐2Λ⁵,4Λ⁵‐catenadi(phosphazene) (t‐Bu‐P₄) (a promoter) in order to obtain well‐defined functional linear polyethers and diblock copolymers. With the aid of the catalyst system, AGE is found to successfully undergo anionic ring‐opening polymerization (ROP) even at room temperature (low reaction temperature) without any side reactions, producing well‐defined linear AGE‐homopolymer in a unimodal narrow molecular weight distribution. Under the same conditions, EEGE also undergoes polymerization, producing a linear EEGE‐homopolymer in a unimodal narrow molecular‐weight distribution. In this case, however, a side reaction (i.e., chain‐transfer reaction) is found to occur at low levels during the early stages of polymerization. The chemical properties of the monomers in the context of the homopolymerization reactions are considered in the design of a protocol used to synthesize well‐defined linear diblock copolyethers with a variety of compositions. The approach, anionic polymerization via the sequential step feed of AGE and EEGE as the first and second monomers, is found to be free from side reactions at room temperature. Each block of the obtained linear diblock copolymers undergoes selective deprotection to permit further chemical modification for selective functionalization. In addition, thermal properties and structures of the polymers and their post‐modification products are examined. Overall, this study demonstrates that a low‐temperature metal‐free anionic ROP using the PPA/t‐Bu‐P₄ catalyst system is suitable for the production of well‐defined linear AGE‐homopolymers and their diblock copolymers with the EEGE monomer, which are versatile and selectively functionalizable linear aliphatic polyether platforms for a variety of post‐modifications, nanostructures, and their applications.     

Study of Shubnikov-de Haas oscillations and measurement of hole effective mass in compressively strained InXGa1−XSb quantum wells

In_XGa_1−XSb has the highest hole mobility amongst all III-V semiconductors which can be enhanced further with the use of strain. The use of confinement and strain in In_XGa_1−XSb quantum wells lifts the degeneracy between the light and heavy hole bands which leads to reduction in the hole effective mass in the lowest occupied band and an increase in the mobility. We present magnetotransport measurements on compressively strained In_XGa_1−XSb and GaSb quantum wells. Hall-bar and Van de Pauw structures were fabricated and Shubnikov-de Haas oscillations in the temperature range of T = 2-10 K for magnetic fields of B = 0-9 T were measured. The reduction of effective hole mass with strain was quantified. These results are in excellent agreement with modeling results from band structure calculations of the effective hole mass in the presence of strain and confinement.     

Synthesis and property study on Eu(III) complexes of modified poly(N-isopropylacrylamide)

Poly(N-isopropylacrylamide) with aromatic end groups (Ar-PNIPAM) were synthesized by atom transfer radical polymerization of N-isopropylacrylamide in isopropanol using phenyl 2-chloropropionate, (4′-phenyl)phenyl 2-chloropropionate, and (2′,6′-diphenyl)phenyl 2-chloropropionate as initiators and CuCl/tris(2-dimethylaminoethyl)amine (Me₆TREN) as a catalytic system. The resulting polymers had narrow polydispersity index of 1.10–1.14 and molecular weights of 3700–4600 g mol⁻¹. Then, novel functional complexes of Ar-PNIPAM, Europium(III) (Eu(III)), and α-Thenoyltrifluoroacetone (TTA) (Ar-PNIPAM/Eu(III)/TTA) with thermosensitive and fluorescent properties were synthesized and characterized by Fourier transform infrared spectra and fluorescence spectroscopy. Metal Eu(III) was not only bonded to oxygen and nitrogen atoms of polymer chain in PNIPAM, but also bonded to TTA. The maximum emission intensity of the complexes at 613 nm was enhanced about 22, 27, 33 times compared with that of the corresponding Eu(III). The lower critical solution temperatures (LCSTs) of Ar-PNIPAM/Eu(III)/TTA were slightly greater compared with that of PNIPAM. Eu(III) complexes had excellent fluorescence performance, the fluorescence spectrum presented characteristic emission of Eu(III) at 613 nm.     

Poly(tetrafluoroethylene)/(hexafluoropropylene) coatings for mitigating the corrosion of steel in a simulated geothermal environment

Study focused on investigating the usefulness of room temperature-curable poly(tetrafluoroethylene)/(hexafluoropropylene) as a polyfluorocarbon coating for mitigating corrosion of carbon steel in a simulated geothermal environment. Coated steel panels were exposed for up to 20 days in an autoclave containing 20,000 ppm CO₂-laden 13 wt.% NaCl solution at 200°C. The appearance of the coatings after 20 days exposure revealed that they adequately protected the underlying steel substrate against corrosion in this short-term exposure. However, the superficial layer of coating suffered hydrothermal oxidation, leading to conformational transformation of the fluorocarbon structure into a fragmental fluorocarboxylic acid derivative as the oxidation reaction product. This transformation generated three undesirable features: (1) an increase in the susceptibility of the coating surfaces to moisture; (2) a decline in the thermal stability of the coatings; (3) a reduction of the crystallinity of the polymer.     

Deposition of DLC film with adhesive W-DLC layer on stainless steel and its tribological properties

Tribological properties of a diamond-like carbon (DLC) coating with an adhesive tungsten-containing DLC (W-DLC) layer were investigated. The coatings were deposited onto AISI316L steel substrates and Si wafers using plasma enhanced chemical vapor deposition and tungsten co-sputtering of the metal target. Methane and argon gases were used as the precursor of the coatings. In this study, three types of coatings were evaluated: DLC/W-DLC on AISI316L (DLC-1), DLC/W-DLC on Si wafer (DLC-2), and DLC on Si wafer (DLC-3). The structural characterizations were performed by transmission electron microscopy and tapping mode atomic force microscopy. At the boundary between the W-DLC layer and the AISI316L substrate, microscopic decohesion or delamination was not observed. The surface roughness of the DLC-1 coating was greater than that of the DLC-2 coating. This feature was derived from the surface roughness of the initial surface of the AISI316L substrate. Friction tests were performed using a rotation-type ball-on-flat configuration tribometer. The observed friction of the DLC-1 coating was unstable compared with the DLC-2 or DLC-3 coatings. This was due to wear debris which had risen to the friction surface resulting in unstable friction on the DLC-1 coating. During the friction studies, the top DLC layer was removed from the adhesive W-DLC layer because the adhesive strength at this part was not enough. In order to achieve the low and stable friction of the DLC coating with the W-DLC layer on AISI316L, it is necessary to improve the smoothness of the surface and the adhesion between the DLC coating and the W-DLC layer.