Flash Lamps as Ignition and Initiation Sources of the VS-2 Pyrotechnic Composition

In the present work it is found that the pyrotechnic composition VS-2 can be initiated with flash lamps IFC-500 and EVIS. VS-2 pyrotechnic composition contains 90% of mercury（Ⅱ） 5-hydrazinotetrazolate perchlorate and 10% of optically transparent copolymer of 2-methyl-5-vinyltetrazole and methacrylic acid （PVMT）. We have found that the flash lamps make it possible to initiate combustion of VS-2 composition with its transition to detonation both in cylindrical charges placed in brass caps of 5 mm diameter and 2 mm high， and film charges with 10 mm×80 mm in size and surface weights of 60 mg·cm^-2 and 90 mg·cm^-2， showing ignition delay times 10 μs and 3 μs， respectively. We also measured detonation velocities for VS-2 composition film charges， which were 4375-4505 m·s^-1 （of the charge being surface mass 60 mg·cm^-2） and 4221-4281 m·s^-1 （of the charge being surface mass 90 mg·cm^-2） and their blasting action on the aluminum plate. The depths of the normal shock wave imprints at the charge-barrier interface were 0.6-0.7 mm （for surface mass of the film charges 60 mg·cm^-2） and 1.2-1.3 mm （for surface mass of the film charges 90 mg·cm^-2）.     

Advantages and disadvantages of nuclear reactions used in reactors or cyclotrons,in addition to a theoretical study based on photodisintegration on natural indium for 111Ag production

Production routes were recorded on available reactions for ¹¹¹Ag production from nuclear reactors or cyclotrons using a natural palladium target based on ¹¹⁰Pd（n, γ） and ¹¹⁰pd（d, n） reactions, respectively.^natCd（γ,x） based on ¹¹⁰Cd（γ, p） has also been studied as a prospective reaction for the production of ¹¹¹Ag. Unfortunately, these nuclear reactions are difficult to utilize because, in some cases, they reduce the specific activi...     

Fe3O4-carbon spheres core–shell supported palladium nanoparticles: A robust and recyclable catalyst for suzuki coupling reaction

Suzuki-Miyaura (S-M) is regarded the most powerful way for synthesis biaryls, triaryls, or incorporating of substituted aryl moieties in organic preparation by the cross-coupling of aryl boronic acid with aryl halides using the Pd catalyst. This work reports the combining of the hydrothermal and microwave-assisted protocol to convert the glucose to magnetic carbon spheres (Fe₃O₄-CSPs) decorated with Pd nanoparticles (NPs) as the catalyst for Suzuki-Miyaura cross-coupling reactions. The physicochemical properties in the produced composite were examined using FESEM, HRTEM, nitrogen isotherms, Raman spectroscopy, FTIR, XPS, and XRD. The as-fabricated composite Pd/Fe₃O₄-CSPs is mostly spherical with a core–shell structure and possesses a great surface area of 253.2 m²·g^-1. Its catalytic performance demonstrates that the composite has excellent stability and high tolerance Suzuki-Miyaura cross-coupling reactions in 30 min at 80 ℃. Both activated and deactivated aryl halides provided excellent yield. The as-fabricated catalyst was recycled for up to four catalytic cycles without a substantial decline in performance. Moreover, this research offers a facile roadmap for synthesizing Pd/Fe₃O₄-CSPs composites and promoting the practical implementation of Pd/Fe₃O₄-CSPs catalysts for organic transformation processes.     

放顶煤液压支架在土耳其IMABT煤矿现场的应用

通过对土耳其IMBAT煤矿地质条件的分析研究，结合多种选型计算方法的验证，最终选择了合适的设备，使该矿的开采效率得到较大提升。同时也扩大了我国的煤炭开采装备应用范围。根据在土耳其IMBAT煤矿现场多年的服务经验，将理论与实践相结合，就综采放顶煤液压支架在土耳其IMABT煤矿现场的应用进行了论述。     

ZrCuAlNi系大块金属玻璃的非晶形成能力、热学和力学性能（英文）

分析ZrCuAlNi系大块金属玻璃的非晶形成能力、热学和力学性能。运用密实堆积和动态脆性指数模型从理论上确定合金的成分。采用铜模吸铸法在氩气保护下制备圆柱形和圆锥形铸锭。用X射线衍射表征圆锥形铸锭以便确定非晶结构。结果表明:两种合金的临界非晶直径为3 mm。用差示扫描量热法(DSC)分析其热行为,加热速率分别为0.5、0.67和0.83 K/s。γ参数、过冷液相区ΔT_x和约化玻璃转变温度T_(rg)等这些实验所得的参数均表明其具有高的非晶形成能力。非晶成分显示其脆性指数为40。合金的压缩试验采用的应变速率为0.016 s~(-1),得到弹性模量约为83 GPa,总应变约为5%,屈服强度为1.6 GPa,硬度为4 GPa。运用密实堆积和动态脆性指数模拟可以预测ZrCuAlNi系合金的非晶形成成分。     

Easy access to pharmaceutically relevant heterocycles by catalytic reactions involving α-imino gold carbene intermediates

This review summarizes recent advances in the field of gold-catalyzed synthesis of pharmaceutically relevant aza-heterocycles via in situ generated α-imino gold carbene complexes as intermediates.     

Performance of insulated FRP-strengthened concrete flexural members under fire conditions

This paper presents the results of fire resistance tests on carbon fiber-reinforced polymer (CFRP) strengthened concrete flexural members, i.e., T-beams and slabs. The strengthened members were protected with fire insulation and tested under the combined effects of thermal and structural loading. The variables considered in the tests include the applied load level, extent of strengthening, and thickness of the fire insulation applied to the beams and slabs. Furthermore, a previously developed numerical model was validated against the data generated from the fire tests; subsequently, it was utilized to undertake a case study. Results from fire tests and numerical studies indicate that owing to the protection provided by the fire insulation, the insulated CFRP-strengthened beams and slabs can withstand four and three hours of standard fire exposure, respectively, under service load conditions. The insulation layer impedes the temperature rise in the member; therefore, the CFRP–concrete composite action remains active for a longer duration and the steel reinforcement temperature remains below 400°C, which in turn enhances the capacity of the beams and slabs.     

Fire hazard in transportation infrastructure: Review,assessment, and mitigation strategies

This paper reviews the fire problem in critical transportation infrastructures such as bridges and tunnels. The magnitude of the fire problem is illustrated, and the recent increase in fire problems in bridges and tunnels is highlighted. Recent research undertaken to address fire problems in transportation structures is reviewed, as well as critical factors governing the performance of those structures. Furthermore, key strategies recommended for mitigating fire hazards in bridges and tunnels are presented, and their applicability to practical situations is demonstrated through a practical case study. Furthermore, research needs and emerging trends for enhancing the “state-of-the-art” in this area are discussed.     

Amination of biochar surface from watermelon peel for toxic chromium removal enhancement

Watermelon peel residues were used to produce a new biochar by dehydration method. The new biochar has undergone two methods of chemical modification and the effect of this chemical modification on its ability to adsorb Cr(VI) ions from aqueous solution has been investigated. Three biochars, Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, were made from watermelon peel via dehydration with 50% sulfuric acid to give Melon-B followed by oxidation with ozone and amination using ammonium hydroxide to give Melon-BO-NH_2 or Triethylenetetramine(TETA) to give Melon-BO-TETA. The prepared biochars were characterized by BET, BJH,SEM, FT-IR, TGA, DSC and EDAX analyses. The highest removal percentage of Cr(VI) ions was 69% for Melon-B,98% for Melon-BO-NH_2 and 99% for Melon-BO-TETA biochars of 100 mg·L~(-1) Cr(VI) ions initial concentration and 1.0 g·L~(-1) adsorbents dose. The unmodified biochar(Melon-B) and modified biochars(Melon-BO-NH_2 and Melon-BO-TETA) had maximum adsorption capacities(Qm) of 72.46, 123.46, and 333.33 mg·g~(-1), respectively.The amination of biochar reduced the pore size of modified biochar, whereas the surface area was enhanced.The obtained data of isotherm models were tested using different error function equations. The Freundlich,Tempkin and Langmuir isotherm models were best fitted to the experimental data of Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, respectively. The adsorption rate was primarily controlled by pseudo-second–order rate model. Conclusively, the functional groups interactions are important for adsorption mechanisms and expected to control the adsorption process. The adsorption for the Melon-B, Melon-BO-NH_2 and Melon-BO-TETA could be explained for acid–base interaction and hydrogen bonding interaction.     

美国陆军建设方向调整

<正>2014年3月25日,美国召开了第113届众议院军事委员会第2次会议,陆军部长约翰·M·麦克休和陆军参谋长雷蒙德·奥迪尔诺上将会前分别发表演讲,阐述关于美国陆军改革的观点。本文摘译自两人的发言录音,以飨读者。在过去的四年里,美军经历了几次国防预算削减。期间的2012年1月5日,奥巴马总统在国防部新闻发布会上公布了《保持美国在全球的领先优势:21世纪国防的优先任务》的新版美国《国防战略指南》