An experimental study of forced convective heat transfer for fully developed Al 2 O 3 –water nanofluid in an annulus tube

Nanofluids have been known as practical materials to ameliorate heat transfer within diverse industrial systems. The current work presents an empirical study on forced convection effects of Al₂O₃–water nanofluid within an annulus tube. A laminar flow regime has been considered to perform the experiment in high Reynolds number range using several concentrations of nanofluid. Also, the boundary conditions include a constant uniform heat flux applied on the outer shell and an adiabatic condition to the inner tube. Nanofluid particle is visualized with transmission electron microscopy to figure out the nanofluid particles. Additionally, the pressure drop is obtained by measuring the inlet and outlet pressure with respect to the ambient condition. The experimental results showed that adding nanoparticles to the base fluid will increase the heat transfer coefficient (HTC) and average Nusselt number. In addition, by increasing viscosity effects at maximum Reynolds number of 1140 and increasing nanofluid concentration from 1% to 4% (maximum performance at 4%), HTC increases by 18%.     

Effects of cold plasma on the color parameters of Hyssop (Hyssopus officinalis L.) using color imaging instrumentation and spectrophotometer

This research was conducted to evaluate the effects of cold atmospheric plasma treatment on the color of Hyssop (Hyssopus officinalis L.) and also to compare the usage of the spectrophotometer vs the color imaging instrumentation for the evaluation of the treatment on the color parameters. The experiments were investigated at different treatment times of 1, 5, and 10 minutes and the voltage values of 17, 20, and 23 kV. Possible changes of color were evaluated by using CIE L*a*b* values obtained with HunterLab colorimeter and CIE L*a*b* values obtained with a digital still camera (DSC) using digital image processing (MATLAB software). The values of L*, a*, and b* of the samples were obtained using both the methods. The results revealed that the L*, a*, and b* values of the treated Hyssop samples changed with increasing the treatment time and the voltage applied. Evaluating the interaction effects revealed that there was a significant difference in the (−a^*/b^* ) ratio. In addition, the results showed that the effects of all variables on the color parameters were significantly different in the case of the DSC using digital image processing. However, these effects were not significantly different using HunterLab colorimeter except for time variable and interaction effects of a* and (−a^*/b^* ) ratio. The lightest green color and the maximum chlorophyll content loss were observed for 23 kV applied over 10 minutes. Based on the results, the digital image processing can be used as a practical tool to study the variations at the color of dried Hyssop leaves after cold plasma treatment.     

Novel electrospun polymer electrolytes incorporated with Keggin‐type hetero polyoxometalate fillers as solvent‐free electrolytes for lithium ion batteries

In this study, solvent‐free nanofibrous electrolytes were fabricated through an electrospinning method. Polyethylene oxide (PEO), lithium perchlorate and ethylene carbonate were used as polymer matrix, salt and plasticizer respectively in the electrolyte structures. Keggin‐type hetero polyoxometalate (Cu‐POM@Ru‐rGO, Ni‐POM@Ru‐rGO and Co‐POM@Ru‐rGO (POM, polyoxometalate; rGO, reduced graphene oxide)) nanoparticles were synthesized and inserted into the PEO‐based nanofibrous electrolytes. TEM and SEM analyses were carried out for further evaluation of the synthesized filler structures and the electrospun nanofibre morphologies. The fractions of free ions and crystalline phases of the as‐spun electrolytes were estimated by obtaining Fourier transform infrared and XRD spectra, respectively. The results showed a significant improvement in the ionic conductivity of the nanofibrous electrolytes by increasing filler concentrations. The highest ionic conductivity of 0.28 mS cm^?1 was obtained by the introduction of 0.49 wt% Co‐POM@Ru‐rGO into the electrospun electrolyte at ambient temperature. Compared with solution‐cast polymeric electrolytes, the electrospun electrolytes present superior ionic conductivity. Moreover, the cycle stability of the as‐spun electrolytes was clearly improved by the addition of fillers. Furthermore, the mechanical strength was enhanced with the insertion of 0.07 wt% fillers to the electrospun electrolytes. The results implied that the prepared nanofibres are good candidates as solvent‐free electrolytes for lithium ion batteries. © 2020 Society of Chemical Industry     

Scene-level two-pass video rate controller for H.265/HEVC standard

Multimedia Tools and Applications - A scene-level two-pass video rate controller for high efficiency video coding (HEVC) standard is proposed in this paper. The proposed rate controller is suitable...     

Study of the performance of dry methane reforming in a microchannel reactor using sputtered Ni/Al2O3 coating on stainless steel

In this study, a microchannel reactor was designed, its catalytic performance in dry methane reforming (DRM) was assessed, and the results were compared with those observed in a conventional fixed bed reactor. The catalyst was prepared in two forms, including catalyst pellets and catalyst-coated plate. The microchannel reactor had thin films of Ni/Al₂O₃ coated on stainless steel substrate via radio frequency (RF) magnetron sputtering method in various sputtering times. The fall-off rate of the catalyst-coated plates can be neglected after putting the plates under the high-temperature DRM reaction, due to the formation of firm active catalyst coatings. The performance of the samples was evaluated at different temperatures from 700 to 800 °C, at P = 1 atm, with a CH₄:CO₂ ratio of 1. The results of XRD showed that with increasing the sputtering time, there was an increase in crystallinity. As observed in FESEM images, the sample prepared with 5 min of sputtering was dense and uniform. The results of EDX not only proved the dispersion of the samples observed in XRD and FESEM analysis, but also verified the presence of the utilized elements. The temperature of 800 °C and the sample with 5 min sputtering time were selected as the optimum condition that provided the best performance. Catalytic performance was investigated in fixed bed reactor at the same GHSV; based on the results there were no significant conversions in the fixed bed reactor. The results of the stability test in the microchannel reactor showed a good performance during 30 h on stream. Therefore, Ni/Al₂O₃ thin films had a satisfactory performance in the designed microchannel. Our study shows that this type of reactor has many advantages in terms of performance, compactness, and economic concerns.     

Selective molecularly imprinted polymer nanofiber sorbent for the extraction of bisphenol A in a water sample

Novel molecularly imprinted polymer nanofibers (MIP‐NFs) were prepared for the adsorption of bisphenol A (BPA) in a water sample using the sol–gel process and the electrospinning technique. The effects of a number of synthesis parameters on the adsorption efficiency were investigated. The successful removal of BPA from MIP‐NFs was studied using UV–visible spectroscopy. The prepared MIP‐NFs were characterized by Fourier transform infrared, field emission SEM, TEM and energy dispersive X‐ray analysis. The results showed that the required molar ratio of 3‐aminopropyltriethoxysilane (APTES) to BPA was 15:1, which indicates a good performance in the rebinding test. Likewise, the molar ratio of APTES:acid:water was 1:2:9. The nylon 6 polymer solution, with a concentration of 12 wt%, showed a maximum adsorption capacity for BPA due to a decrease in the nanofiber diameter and an increase in the accessible sites. Furthermore, the maximum adsorption capacity of BPA was achieved at pH 7. Concerning the binding of BPA on MIP‐NFs, the experimental data matched well with the pseudo‐second‐order kinetics data and the Sips isotherm model. The saturated binding capacity for MIP‐NFs was predicted to be 115.1 mg g^?1, which was more than twice as high as that for non‐imprinted polymer nanofibers (46.82 mg g^?1). The results obtained in this study confirmed that the prepared MIP‐NFs showed considerable binding specificity for BPA in comparison with similar structural compounds such as phenol, naphthol and Naphthol AS, in aqueous solution. The binding capacity of MIP‐NFs remained almost constant after five cycles of reuse. The real sample analysis indicated that MIP‐NFs could be utilized as a useful sorbent material for the extraction of BPA from a water sample.     

Barium promoted manganese oxide catalysts in low-temperature methane catalytic combustion

In this study, a series of BaO-MnO_x mixed oxide catalysts were synthesized by the mechanochemical method and employed in lean methane catalytic combustion (MCC) at low temperatures. The synthesized catalysts were characterized by XRD, BET, TGA, FT-IR, H₂-TPR, O₂-TPD, and FESEM analyses. The results indicated that the 10 wt% BaO-MnO_x catalyst with a BET surface area of 25 m² g^?1 possessed the best catalytic performance. The higher activity of the 10 wt% BaO-MnO_x catalyst was due to the higher ability to supply oxygen through the components during the MCC process. The light-off temperature corresponding to 50% of the methane conversion was about 330 °C, which was about 50 °C lower than the pure MnO_x. Moreover, for the BaO(10)-MnO_x catalyst, the 10 and 90% of methane conversion temperatures were about 305 and 427 °C, respectively. Also, the 10 wt% BaO-MnO_x catalyst exhibited high catalytic stability under dry feed condition at 450 °C for 50 h. Furthermore, the influence of various parameters such as calcination temperature, feed ratio, GHSV, pretreatment condition, and presence of water vapor in the feedstock was studied on the catalytic performance.     

Zinc-doped hydroxyapatite and poly(propylene fumarate) nanocomposite scaffold for bone tissue engineering

Hydroxyapatite (HA) is a bioceramic material that shares similar crystal and chemical structures with inorganic components of the bone. However, HA lacks osteoinductive activity and has a brittle nature, making it challenging to apply for direct load-bearing bone applications. In this study, we used a wet chemical method to synthesize zinc-doped hydroxyapatite powders with different Zn/(Zn+Ca) molar ratios of 0, 0.025, 0.05, and 0.1. The corresponding Zn-HA was designated as HA, Zn2.5-HA, Zn5-HA, and Zn10-HA. The Zn-HA powders at 30 wt% were used to fabricate poly(propylene fumarate) (PPF)-based nanocomposite scaffolds (HA/PPF, Zn2.5-HA/PPF, Zn5-HA/PPF, and Zn10-HA/PPF). The physical properties of obtained scaffolds were examined by scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and atomic force microscopy (AFM). Live/dead cell viability assay showed that these scaffolds were biocompatible and supported excellent adhesion of MC3T3-E1 preosteoblast cells. Additionally, the proliferation of cells was detected at 1, 4, and 7 days on these scaffolds. Alkaline phosphatase (ALP) activity measurement and alizarin red staining showed good osteogenic differentiation and matrix mineralization for MC3T3-E1 cells growing on these scaffolds. Taken together, the results here indicate that Zn5-HA/PPF nanocomposite scaffolds are promising scaffold material for bone tissue engineering.

Graphical abstract