A novel ceramic matrix composite based on YNbO4–TiO2 for microwave applications

This work presents the dielectric properties of YNbO₄ (YNO)–TiO₂ composites in the microwave range. X-ray diffraction analysis demonstrates that the addition of TiO₂ to YNO results in the formation of a Y(Nb_0.5Ti_0.5)₂O₆ phase. In the microwave range, the values of permittivity and dielectric loss did not present major changes with the increment of TiO₂. Moreover, the addition of TiO₂ results in an improvement in the thermal stability of YNO, with YNO63 demonstrating a resonant frequency of ?8.96 ppm.°C^?1. We utilised numerical simulations to evaluate the behaviour of these materials as dielectric resonator antennae and it is found that they exhibit a reflection coefficient below ?10 dB at the resonant frequency, with a realised gain of 4.94 – 5.76 dBi, a bandwidth of 665–1050 MHz and a radiation efficiency above 84%. Our results indicate that YNO–TiO₂ composites are interesting candidates for microwave operating devices.     

Foliar Spraying of Silicon Associated with Salicylic Acid Increases Silicon Absorption and Peanut Growth

Silicon - Silicon (Si) combined with foliar spraying of salicylic acid (SA) can affect the absorption of this beneficial element. A study with Si non-accumulators plants (soybean and bean) observed...     

Synthesis and Characterization of Ti-Nb2O5 Catalysts for Discoloration Reaction of Bromophenol Blue and Indigo Carmine Dyes

Topics in Catalysis - This work investigated the photodegradation of bromophenol blue (BPB) and indigo carmine (IC) dye under UV–Visible light using pure oxides of titanium and niobium, as...     

Functionalized-radiolabeled hydroxyapatite/tenorite nanoparticles as theranostic agents for osteosarcoma

Hydroxyapatite (HA) nanoparticles (NPs) doped with different radioisotopes for use as theranostic systems play an important role in scientific research nowadays due to their ability to simultaneously act in the treatment and diagnosis of various types of cancers. In this work, we describe the synthesis and characterization of a hydroxyapatite/tenorite nanocomposite functionalized with folic acid, representing a nanotheranostic material with potential for application as an agent in positron emission tomography imaging systems and to act specifically in the treatment and diagnosis of osteosarcoma. ⁶⁴Cu and ³²P were produced by nuclear activation in the TRIGA reactor at CDTN. The obtained samples were characterized by XRD with Rietveld refinement, XAFS, SEM, BET, TGA, FTIR, CHN, ICP-AES, XPS and gamma spectroscopy. We investigated how CuO grows in HA NPs, the stability of the interactions between CuO and HA constituents and the interactions between folic acid and the surface of the HA NPs. The results indicate the formation of a second phase (tenorite) besides hydroxyapatite, and that the interactions between the two phases are stable, resulting in a nanocomposite. Furthermore, the activation of ⁶⁴Cu and ³²P inside the HA matrix, through the exposition to a neutron flux, produces a theranostic material of interest for biological tests.     

Quality enhancement of the abundant under‐valued crustacean,lobster krill (Munida spp.), during its chilled storage

Lobster krill (Munida genus) represents an under‐valued crustacean frequently caught on European fishing banks. In this work, its sensory, microbiological and biochemical qualities were evaluated during chilled storage. Additionally, the effects of a prestorage antimelanosic treatment consisting of soaking in sodium metabisulphite (SMB) solutions at two different concentrations (0.25% and 0.75%) were also studied. SMB prestorage treatment provided lobster specimens that still exhibited acceptable sensory quality after 10 days of storage, while control specimens were unacceptable at that time. SMB treatment also resulted in a significant (P < 0.05) inhibition of microbial growth, mainly of Enterobacteriaceae, psychrotrophes and proteolytic bacteria. Low lipid oxidation levels were observed for all batches; however, a significantly higher (P < 0.05) retention of polyunsaturated fatty acids was found in SMB‐treated lobster, especially in the 0.75% SMB batch. The results presented here open the way to the potential commercialisation of currently under‐utilised lobster krill as a chilled product.     

Effect of biodegradable film (lyophilised alga Fucus spiralis and sorbic acid) on quality properties of refrigerated megrim (Lepidorhombus whiffiagonis)

The effect of replacing the on‐board currently employed polyethylene film by a novel type of environmentally friendly packaging was studied. For it, a polylactic acid (PLA) biodegradable film including lyophilised alga Fucus spiralis and sorbic acid was applied during megrim (Lepidorhombus whiffiagonis) refrigeration and its effect on fish quality loss was evaluated. Thus, sensory assessment showed that samples wrapped up with PLA film including 8% alga and 1% sorbic acid were still acceptable on day 11, while control fish specimens (kept under polyethylene film) were rejected at that time. Under such biodegradable film condition, a preservative effect was also implied according to chemical indices assessment related to microbial activity (trimethylamine–N) and lipid oxidation development (peroxide and fluorescent compounds formation); additionally, lower mean numbers for different microbiological groups (aerobes, Enterobacteriaceae and psychrotrophs) were detected. This result provides a promising replacement strategy to enhance refrigerated fish quality and reduce the waste material content.     

Purified high‐sulfur coal as a fuel for direct carbon solid oxide fuel cells

The use of low‐rank coal in a clean and efficient manner is a major challenge facing the current coal technology. A high‐sulfur coal with 4.5 wt% sulfur is chosen to examine the compatibility of the pristine coal and the purified contrast with a solid oxide fuel cell (SOFC) with nickel cermet anodes. Desulfurization of the pristine coal is performed by molten caustic leaching method with a removal ratio of 80%. Analyses of the physicochemical properties of coal samples indicate that the purified coal has a more favorable structure and higher Boudouard reactivity, which is suitable as a fuel for fuel cells. The assessment of electrochemical performance reveals that the purification treatment not only makes the peak power density of SOFCs improve from 115 to 221 mW cm^?2 at 900°C but also extends their durability from 1.7 to 11.2 hours under a current density of 50 mA cm^?2 at 850°C with a fuel availability increasing from 6.25% to 40%. The postmortem analyses show that far less deposited carbon and nickel sulfide are observed on the anode surface. The fuel‐based investigation reveals that the purified coal is a promising fuel for direct carbon fuel cells.