Improvement of 19F MR image uniformity in a mouse model of cellular therapy using inductive coupling

Magnetic Resonance Materials in Physics, Biology and Medicine - Improve 19F magnetic resonance imaging uniformity of perfluorocarbon (PFC)-labeled cells by using a secondary inductive resonator...     

Meeting the challenge of water sustainability: The role of process systems engineering

This white paper is the result of discussions during the FIPSE-4 conference ( http://fi-in-pse.org ) in June 2018. It aims to highlight open problems and provide directions for future research in the area of water with emphasis on its agricultural usages. Some of the open problems discussed are: (a) the use of ecosystems as unit operations to understand their role in providing freshwater and in cleaning polluted water; (b) consideration of interactions and independencies between flows of water and other resources, such as food, energy, materials, ecosystem services, and environmental emissions; (c) challenges in modeling, sensing, and closed-loop control in precision irrigation. In particular, the development of agro-hydrological models that balance computing speed versus solution details and accuracy: (d) The use of state and parameter estimation approaches, through field measurements, to obtain soil moisture levels accurately; and (e) decision support systems to administer water and nutrient needs for optimum yields of agricultural products.     

Biomechanical response of the human foot when standing in a natural position while exposed to vertical vibration from 10–200 Hz

Exposure to foot-transmitted vibration (FTV) can lead to pain and numbness in the toes and feet, increased cold sensitivity, blanching in the toes, and joint pain. Prolonged exposure can result in a clinical diagnosis of vibration-induced white foot (VIWFt). Data on the biomechanical response of the feet to FTV is limited; therefore, this study seeks to identify resonant frequencies for different anatomical locations on the human foot, while standing in a natural position. A laser Doppler vibrometer was used to measure vertical (z-axis) vibration on 21 participants at 24 anatomical locations on the right foot during exposure to a sine sweep from 10–200?Hz with a peak vertical velocity of 30?mm/s. The most notable differences in the average peak frequency occur between the toes (range: 99–147?Hz), midfoot (range: 51–84?Hz) and ankle (range: 16–39?Hz).

Practitioner Summary: The biomechanical response of the human foot exposed to foot-transmitted vibration, when standing in a natural position, was measured for 21 participants. The foot does not respond uniformly; the toes, midfoot, and ankle regions need to be considered independently in future development of isolation strategies and protective measures.     

Photon Upconversion Hydrogels for 3D Optogenetics

The ability to optically induce biological responses in 3D has been dwarfed by the physical limitations of visible light penetration to trigger photochemical processes. However, many biological systems are relatively transparent to low-energy light, which does not provide sufficient energy to induce photochemistry in 3D. To overcome this challenge, hydrogels that are capable of converting red or near-IR (NIR) light into blue light within the cell-laden 3D scaffolds are developed. The upconverted light can then excite optically active proteins in cells to trigger a photochemical response. The hydrogels operate by triplet–triplet annihilation upconversion. As proof-of-principle, it is found that the hydrogels trigger an optogenetic response by red/NIR irradiation of HeLa cells that have been engineered to express the blue-light sensitive protein Cry2olig. While it is remarkable to photoinduce the clustering of Cry2olig with blanket NIR irradiation in 3D, it is also demonstrated how the hydrogels trigger clustering within a single cell with great specificity and spatiotemporal control. In principle, these hydrogels may allow for photochemical control of cell function within 3D scaffolds, which can lead to a wealth of fundamental studies and biochemical applications.     

Effect of rheology and humic acids on the transport of environmental fluids: Potential implications for soil remediation revealed through microfluidics

This study investigated the potential effect of shear rheology and humic acids (HA) on the subsurface transport of polymeric fluids used for the remediation of contaminants. Polymeric fluids were prepared with guar, scleroglucan, and carboxymethyl cellulose (CMC). Guar fluids can be used to suspend reactive particles for contaminant degradation. Fluids prepared with 2.5 g/L of guar in water were viscous, and the crosslinker borax (1 g/L) made them viscoelastic. Microfluidics experiments showed that the increase in elasticity blocked the flow of guar in 350 μm channels. Guar, CMC, or scleroglucan fluids containing sodium thiosulfate can be used to trap toxic Cr(VI) in the subsurface and reduce it to harmless Cr(III). Trapping of Cr(VI) is achieved by the gelation of the fluids upon contact with chromium. Before mixing with chromium, HA did not affect the flow of CMC, guar, and scleroglucan in microfluidic channels. Quartz-crystal microbalance with dissipation monitoring experiments indicates that HA reduced sorption of guar onto silica, potentially promoting the transport of guar fluids in sandy aquifers. While HA slightly decreased the rate of gelation of CMC and scleroglucan upon contact with chromium, it did not affect the fast gelation rate of guar. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48465.     

Comparison of chlorine and chloramine in the release of mercury from dental amalgam

The purpose of this project was to compare the ability of chlorine (HOCl/OCl⁻) and monochloramine (NH₂Cl) to mobilize mercury from dental amalgam. Two types of amalgam were used in this investigation: laboratory-prepared amalgam and samples obtained from dental-unit wastewater. For disinfectant exposure simulations, 0.5 g of either the laboratory-generated or clinically obtained amalgam waste was added to 250 mL amber bottles. The amalgam samples were agitated by end-over-end rotation at 30 rpm in the presence of 1 mg/L chlorine, 10 mg/L chlorine, 1 mg/L monochloramine, 10 mg/L monochloramine, or deionized water for intervals of 0 h, 2 h, 4 h, 8 h, and 24 h for the clinically obtained amalgam waste samples and 4 h and 24 h for the laboratory-prepared samples. Chlorine and monochloramine concentrations were measured with a spectrophotometer. Samples were filtered through a 0.45 µm membrane filter and analyzed for mercury with USEPA standard method 245.7. When the two sample types were combined, the mean mercury level in the 1 mg/L chlorine group was 0.020 mg/L (n = 25, SD = 0.008). The 10 mg/L chlorine group had a mean mercury concentration of 0.59 mg/L (n = 25, SD = 1.06). The 1 mg/L chloramine group had a mean mercury level of 0.023 mg/L (n = 25, SD = 0.010). The 10 mg/L chloramine group had a mean mercury level of 0.024 mg/L (n = 25, SD = 0.011). Independent samples t-tests showed that there was a significant difference between the natural log mercury measurements of 10 mg/L chlorine compared to those of 1 mg/L and 10 mg/L chloramine. Changing from chlorine to chloramine disinfection at water treatment plants would not be expected to produce substantial increases in dissolved mercury levels in dental-unit wastewater.     

Use of in-stream reservoirs to reduce bacterial contamination of rural watersheds

An investigation into bacterial water quality problems was conducted on an interconnected stream and irrigation system within the Oldman River Basin of southern Alberta, Canada. Levels of indicator bacteria, including fecal coliforms, generic Escherichia coli and fecal streptococci, were repeatedly measured in streams and irrigation return canals of this river basin during the summer of 2001. Bacterial-loading segments of the irrigation/stream system were identified through a comparison of indicator bacteria levels in pairs of upstream and downstream sites. Mann-Whitney U-tests indicated that reservoirs significantly reduced bacterial counts. A temporal comparison of E. coli counts and river discharges suggested that these indicator bacteria do not originate from within in-stream sediments. Site-specific as well as cumulative inputs from a variety of non-point sources are likely to be responsible for the high downstream levels of indicator bacteria in this water system. The use of management practices such as in-stream reservoirs may significantly reduce contamination, and increase the quality of limited rural water supplies to allow their reuse and safe discharge into downstream water sources. The identification of bacteria-loading river/canal segments could also be used to prioritize restoration projects.