Effect of humic acids on heavy metal removal by zero-valent iron in batch and continuous flow column systems

The effects of Aldrich humic acids (HA) on the removal of Zero-valent iron (ZVI) was investigated in laboratory systems. In batch, the removal rate of Zn and Ni (5 mg l(-1)) was, respectively, 2.8 and 2.4 times lower in the presence of HA (20 mg l(-1)) than in the absence of HA, presumably due to the formation of HA-heavy metal complexes which prevented the removal reactions at the ZVI surface. Chromate removal was not affected. In a column test, two parallel systems were supplemented with a continuous input of simulated groundwater containing a mixture of the heavy metals Zn, Ni and Cr(VI) (5 mg l(-1) each), with or without HA (at 20 mg l(-1)). Initially, the two column systems efficiently (>90%) removed the heavy metals from the simulated groundwater. When the input heavy metal concentration was increased to 8-10 mg l(-1), a significant breakthrough of Ni and Zn, up to 80%, occurred in the column system fed with HA. Chromate and HA did not significantly break through. After 60 weeks, the effect of HA on leaching of the accumulated metals (approx. 2 mg g(-1)) was investigated. No significant leaching was observed. The results of this study suggest that the impact of dissolved organic matter on the efficiency and lifetime of a ZVI barrier for in situ removal of heavy metals should be considered in the design of the barrier.     

Feasibility of measuring phase relaxation time with subpicosecond pulses

Techniques to determine the phase relaxation time of absorbing dye solutions are evaluated. It is shown that, contrary to a recent paper by Cho et al., transmission of low intensity pulses cannot yield information on the relaxation of broad-band absorbing transitions.     

Degenerate four-wave mixing of picosecond pulses in the saturable amplification of a dye laser

We demonstrate intracavity degenerate four-wave mixing in the saturable gain medium of a dye laser. The dye laser is a synchronously pumped bidirectional ring laser that produces pulses of 4 ps duration. The dynamics of the interaction provides information on the phase coherence of the pulses. A simple theory of transient degenerate four-wave mixing is presented that accurately describes the measurements.     

Validation of a supervisory control system for energy savings in membrane bioreactors

The application of fixed operational protocols and settings for membrane bioreactors (MBR) often leads to suboptimal filtration conditions due to the dynamic nature of mixed liquor characteristics. With regard to process optimization and energy savings, the potential benefits of a dynamic control system, enabling to adapt fouling control actions (ACS outputs) in an automated way to the actual mixed liquor fouling propensity, are thus obvious. In this paper, the pilot-scale validation of such an advanced control system (ACS) is elaborated. A specific on-line fouling measurement method, the MBR-VFM (VITO Fouling Measurement), was used for the evaluation of the mixed liquor’s reversible fouling propensity, which was used as a primary ACS input parameter. A first series of tests with a gradual increase in complexity of the selected input and output parameters indicated the functionality of the ACS and demonstrated a substantial reduction of aeration, however sometimes at the expense of a higher fouling rate. The ACS was further fine-tuned and subsequently tested for a longer period under more dynamic operating conditions. A significant correlation was found between the reversible fouling potential measured by the MBR-VFM and the on-line permeability, indicating that the MBR-VFM is a suitable ACS input. Furthermore, an average 22% reduction in aeration flow to the membranes could be achieved without any obvious negative effect on filtration performance. This indicates that this approach is promising to optimize energy consumption in MBRs.     

Analysis of a ring-laser gyroscope with intracavity phase-conjugate coupling

A ring-laser gyroscope with the opposite modes coupled by an intracavity phase-conjugate interaction is examined analytically and numerically. It is shown that the coupling mitigates cross-saturation-induced mode extinction, allowing a homogeneously broadened medium to be used as the gain for a laser gyroscope. It is also shown that the coupling can induce a bias beat frequency that can potentially be used as an all-optical dither. The phase conjugation is shown to affect the lock-in threshold only indirectly. The results are compared with pertinent experiments from the literature.     

Simulating water and nitrogen behaviour in soils cropped with winter wheat

The SWATNIT model [26], predicting water and nitrogen transport in cropped soils, was evaluated on experimental data of winter wheat for different N treatments. The experiments were monitored at three different locations on different soil types in the Netherlands. Crop growth was simulated using the SUCROS model [11] which was integrated in the SWATNIT model. Both water and nitrogen stress were incorporated. Except for the soil hydraulic properties, all model parameters were taken from literature. The model performance was evaluated on its capability to predict soil moisture profiles, nitrate and ammonia profiles, the time course of simulated total dry matter production and LAI; and crop N-uptake. Results for the simulations of the soil moisture profile indicate that the soil hydraulic properties did not reflect the actual physical behaviour of the soil with respect to soil moisture. Good agreement is found between the measured and simulated nitrate and ammonia profiles. The simulation of the nitrate content of the top layer at Bouwing was improved by increasing the NH ₄ ⁺ -N-distribution coefficient thereby improving the simulation of the NH ₄ ⁺ -N-content in this layer. Deviations between simulated and measured nitrate concentrations also occurred in the bottom layers (60–100 cm) of the soil profile. The phreatic ground water might influence the nitrate concentrations in the bottom layers. Concerning crop growth modelling, improvements are needed with respect to the partitioning of total dry matter production over the different plant organs in function of the stress, the calculation of the nitrogen stress and the total nitrogen uptake of the crop through a better estimate of the N-demand of the different plant organs.     

Modelling Cooling of Packaged Fruit Using 3D Shape Models

This study presents a novel methodology to model the cooling processes of horticultural produce using realistic product shapes rather than commonly used simplified 3D shapes, such as spheres. Variable 3D apple and pear models were created by means of a validated geometric model generator based on X-ray computed tomography images. The fruit were randomly stacked into a geometrical model of a corrugated fibreboard box using the Discrete Element Method. A forced-air cooling process was simulated for three such apple filling patterns using CFD and the results were compared to those obtained with fruit represented by equivalent spheres. No significant difference in average aerodynamic resistance between the real apple shape and its spherical representation was found. The main contributor to the overall pressure drop was the package design rather than product shape. However, large differences in local air velocity and convective heat transfer coefficients were found between the two representations. The degree of cooling uniformity between individual fruit was overestimated when using simplified product shapes: real apple fruit shapes cooled less uniform. This difference between real and simplified product shapes was even larger for a box filled with pear fruit that are more different from a spherical shape. These results demonstrate that improved computer-aided design approaches help in simulating more accurate convective cooling processes. In a next step, such simulations will be used for multi-objective optimization of packaging in terms of cold chain efficiency and cooling uniformity.     

Decontamination of seeds for seed sprout production by high hydrostatic pressure

Garden cress, sesame, radish, and mustard seeds immersed in water were treated with high pressure (250, 300, 350, and 400 MPa) for 15 min at 20 degrees C. After treatment, percentages of seeds germinating on water agar were recorded for up to 11 days. Of the seeds tested, radish seeds were found to be the most pressure sensitive, with seeds treated at 250 MPa reaching 100% germination 9 days later than untreated control seeds did. Garden cress seeds, on the other hand, were the most pressure resistant, with seeds treated at 250 MPa reaching 100% germination 1 day later than untreated control seeds did. Garden cress sprouts from seeds treated at 250 and 300 MPa also took about 1 day longer to reach average sprout length than sprouts from untreated control seeds did, indicating that sprout growth was not retarded once germination had occurred. Garden cress seeds were inoculated with suspensions of seven different bacteria (10(7) CFU/ml) and processed with high pressure. Treatment at 300 MPa (15 min, 20 degrees C) resulted in 6-log reductions of Salmonella Typhimurium, Escherichia coli MG1655, and Listeria innocua, > 4-log reductions of Shigella flexneri and pressure-resistant E. coli LMM1010, and a 2-log reduction of Staphylococcus aureus. Enterococcus faecalis was virtually not inactivated. For suspensions of the gram-positive bacteria, similar levels of inactivation in water in the absence of garden cress seeds were found, but the inactivation of E. coil LMM1010 and S. flexneri in water in the absence of garden cress seeds was significantly less extensive. These data suggest that garden cress seeds contain a component that acts synergistically with high hydrostatic pressure against gram-negative bacteria.