Plowing with precedence: A variant of the windy postman problem

In winter, a common problem is to determine the route that a snowplow should take in order to minimize the distance traveled. We propose a variant of this arc routing problem that is motivated by the fact that deadhead travel over streets that have already been plowed is significantly faster than the time it takes to plow the street. This problem differs from most arc routing problems because the cost of traversing a street changes depending on the order of the streets on a route. We develop a method that generates near-optimal solutions to instances as large as 200 nodes.     

A multi-phase kinetic model to simulate hydration of slag–cement blends

Ground granulated blast furnace slag, which shows cementitious behavior (latent hydraulic activity) and pozzolanic characteristics (reaction with lime), has been widely used as a mineral admixture in normal and high strength concretes. Hydration of slag–blended cement is much more complex than that of ordinary Portland cement because of the mutual interactions between the cement hydration and the slag reaction. This paper presents a kinetic hydration model for cement–slag blends. The proposed model analyzes the slag reaction separate from cement hydration by considering the production of calcium hydroxide in cement hydration and its consumption in slag reactions. The amount of free water and the amount of calcium hydroxide left in the system were adopted as the control indicators for determining the slag reaction. Using the proposed model, the reaction ratio of slag can be evaluated as a function of curing age, considering the influences of the water to binder ratio, the slag replacement ratio and the curing temperature. Furthermore, the amount of chemically-bound water (self-cementing properties), calcium hydroxide (pozzolanic capabilities), and the heat released from hydration are evaluated by determining the contributions from both the cement hydration and the slag reaction. The evaluated results show good accordance with the experimental results.     

Binary adsorption behaviour of methane and nitrogen gases

Separation of methane and nitrogen gases is critical in the upgrading of LFG (Landfill gas), natural gas and coal bed gas in order to have a commercial heating value for methane. From an environmental point of view, methane capture from landfill gas is essential to prevent greenhouse gas emissions. Adsorption could be a beneficial process to capture low purity methane from a landfill site that is nearing the end of its lifecycle and produce high purity methane. In this work, Ceca 13X zeolite and Alcan Activated Alumina AA 320-AP have been studied for their potential for this separation and compared with Silicalite in literature. Pure and mixture adsorption isotherms were determined at 40 and 100?°C for these adsorbents by constant volume method and concentration pulse chromatographic technique, respectively. Mixture adsorption isotherms for the binary system of methane and nitrogen gases at 40 and 100?°C and 1 atmosphere total pressure have been determined by VV?CCPM (Van der Vlist and Van der Meijden Concentration Pulse Method). The application of Extended Langmuir model for this binary system have also been discussed and compared to the experimental results. Results show that equilibrium separation factor for silicalite is larger than zeolite Ceca 13X and Alcan activated alumina AA320-AP. Both Silicalite and Ceca 13X find application in the bulk separation of methane from nitrogen when y _CH4?>?0.4, especially in LFG, coal bed gas and natural gas.     

A Water Soluble Hydrated Metal Oxide primer for Adhesively Bonded Joints

Weight saving and manufacturing cost benefits have led to the increase in use of adhesively-bonded structures in the automotive, aerospace and marine industries. In order to be a viable alternative to, for example, metal fasteners, these adhesive bonds should maintain the strength typical of conventional fastener systems. In many applications, the bonds are put under a variety of environmental and mechanical stresses. For example, frequently these bonds are exposed over long periods of time to wet environments which can result in a loss of bond strength. The loss of strength can result from the extension of cracks and other deformations that occur in the adhesive or metal oxide which are accelerated by the moist environment. As a result of this deficiency, extensive research and development efforts have been undertaken to define methods and identify materials which improve bonded joint performance in humid conditions. For example, it is known that surface preparation is important in the bonding of aluminum and titanium, and cleanliness in the bonding of ceramic articles. Thus, it is essential that, before bonding, the adherend is cleaned and chemically pretreated to produce a surface which in combination with the adhesive develops the bond strengths which meet application requirements. The normal procedure after surface treatment is to apply a corrosion-inhibiting primer by a spray technique for surface protection prior to bonding and to insure resin penetration into the oxide structure which provides improved environmental resistance. A major drawback of spray application is the large volume of organic solvent (normally MEK) emitted to the atmosphere. A successful alternative is the recently-developed electrodeposited primer by Northrup Corp., which consists of water solubilized primer particles which migrate in an electric field to a conductive work piece where they are deposited in a dense, continuous coating.¹ The primer was developed for use with 121°C (250°F) curing epoxy adhesives. An Air Force sponsored contract is currently under way, the objective of which is to develop an electrodeposited water-based primer for use with 177°C (350°F) curing epoxy systems.² A water-based epoxy primer system for application using the more conventional spray techniques has also been decribed.³     

The folding of centromeric DNA strands into intercalated structures: a physicochemical and computational study

We have carried out a physicochemical and computational analysis on the stability of the intercalated structures formed by cytosine-rich DNA strands. In the computational study, the electrostatic energy components have been calculated using a Poisson-Boltzmann model, and the non-polar energy components have been computed with a van der Waals function and/or a term dependent on the solvent-accessible surface area of the molecules. The results have been compared with those obtained for Watson-Crick duplexes and with thermodynamic data derived from UV experiments. We have found that intercalated DNA is mainly stabilized by very favorable electrostatic interactions between hydrogen-bonded protonated and neutral cytosines, and by non-polar forces including the hydrophobic effect and enhanced van der Waals contacts. Cytosine protonation electrostatically promotes the association of DNA strands into a tetrameric structure. The electrostatic interactions between stacked C.C+ pairs are strongly attenuated by the reaction field of the solvent, and are modulated by a complex interplay of geometric and protonation factors. The forces stabilizing intercalated DNA must offset an entropic penalty due to the uptake of protons for cytosine protonation, at neutral pH, and also the electrostatic contribution to the solvation free energy. The latter energy component is less favorable for protonated DNA due to the partial neutralization of the negative charge of the molecule, and probably affects other protonated DNA and RNA structures such as C+-containing triplexes.     

Immigration and Construction: The Makeup of the Workforce in the Washington, D.C., Metropolitan Area

There are an estimated 11 million illegal immigrants currently residing in the United States. Of this population, research shows that approximately 19% work in the construction industry, comprising around 14% of all construction workforces. The Washington, D.C. metropolitan region has a unique makeup of workforces within the construction industry. Between September 2006 and February 2007, 896 construction workers from several projects in the Washington, D.C. metropolitan area participated in a survey. The study targeted the low-skilled, immigrant-saturated trades in construction. The most compelling finding in this study was that illegal immigrants make up a far greater proportion of the construction workers in low-skilled trades than indicated by national averages, 55% as compared to between 20 and 36% nationally. This will increase the impact of immigration and immigration reform substantially for the Washington, D.C. metropolitan.     

Effects of prenatal cocaine exposure on embryonic expression of sonic hedgehog

PURPOSE: To estimate the impact of visual impairment in older Australians on the use of community support services. METHODS: In the Blue Mountains Eye Study, 3654 people aged 49 or older were examined- 82.4% of eligible residents in an area west of Sydney, Australia. Presenting and best-corrected visual acuities were measured using a LogMAR chart. Subjects were categorized as having visual impairment if their better eye read 40 or fewer letters (20/40 or worse). Interview data included marital and other socioeconomic status measures, living status (alone or with spouse or other person), use of community support services, reliance on regular help from nonspouse family members or friends, and perceived ability to go out alone. RESULTS: After adjusting for age, gender, education, living status, walking disability, and health-related factors, for each one-line (five-letter) decrease in best-corrected visual acuity, there was a corresponding increase in reliance on community support services (odds ratio [OR], 1.17; 95% confidence interval, [CI] 1.07-1.28) or combined community and family support (OR 1.22; 95% CI, 1.12-1.32). Visually impaired persons were three times as likely to use regular support services provided by the municipality (OR 3.1; 95% CI, 1.8-5.1). A similar increased reliance on regular help from community, nonspouse family members, or friends was found. Visually impaired persons were also much more likely to state that they thought they were unable to go out alone (OR 6.2; 95% CI, 2.6-14.3). The findings were similar when presenting visual acuity was used to define visual impairment or after subjects with walking disabilities were excluded. Visual impairment seemed to have a greater effect on use of community support services in women than in men. CONCLUSIONS: After adjustment was made for confounding factors, visual impairment was found to affect significantly and negatively the independence of elderly people, particularly older women. Presenting visual acuity closely approximated best-corrected visual acuity in its impact on the use of community support services.     

Detection algorithm and initial laboratory results using V-BLASTspace-time communication architecture

The signal detection algorithm of the vertical BLAST (Bell Laboratories Layered Space-Time) wireless communications architecture is briefly described. Using this joint space-time approach, spectral efficiencies ranging from 20-40 bit/s/Hz have been demonstrated in the laboratory under flat fading conditions at indoor fading rates. Early results are presented