Induction of necrosis by zinc in prostate carcinoma cells and identification of proteins increased in association with this induction

Endothelin-1 (ET-1) is a cardiovascular peptide that binds to two distinct receptors, ET(A) and ET(B), resulting in systemic and regional vasoconstriction, alteration in sodium excretion, mitogenesis, and release of other vasoactive peptides such as atrial natriuretic peptide (ANP). A role for ET-1 has been proposed in congestive heart failure (CHF) based on the increase in circulating ET-1 in this cardiovascular disease state. The present study determined the cardiorenal and endocrine responses to chronic selective oral ETA antagonism in experimental CHF. Two groups of conscious dogs underwent 21 days of pacing-induced CHF. These groups included a control untreated group (n = 6) and a group that received an orally active ET(A) receptor antagonist (A-127722, Abbott Pharmaceuticals, 5 mg/kg PO bid, n = 6). Each group was studied at baseline before the onset of CHF and after 14 and 21 days of CHF. Compared with the CHF control group, the ET(A) receptor antagonism group at 14 days of CHF showed lower mean arterial pressure and systemic vascular resistance. Similarly, ET(A) receptor antagonism markedly attenuated the increase in circulating ANP despite similar atrial pressures. At 21 days of CHF, ET(A) receptor antagonism lowered pulmonary artery pressure, pulmonary vascular resistance, and systemic vascular resistance in association with a higher cardiac output. Plasma ANP remained suppressed. Despite the lower mean arterial pressure and circulating ANP in the ET(A) receptor antagonist group, the absolute decrease in sodium excretion from baseline was less compared with the untreated CHF control group. The present investigation supports the conclusion that endogenous ET-1 participates in the systemic and pulmonary vasoconstriction, the elevation of ANP, and the sodium retention that characterize this model of experimental CHF, suggesting a potential therapeutic role for ET(A) receptor antagonism in CHF.     

Highly reliable a‐IGZO TFTs on a plastic substrate for flexible AMOLED displays

We have successfully reduced threshold voltage shifts of amorphous In–Ga–Zn–O thin‐film transistors (a‐IGZO TFTs) on transparent polyimide films against bias‐temperature stress below 100 mV, which is equivalent to those on glass substrates. This high reliability was achieved by dense IGZO thin films and annealing temperature below 300 °C. We have reduced bulk defects of IGZO thin films and interface defects between gate insulator and IGZO thin film by optimizing deposition conditions of IGZO thin films and annealing conditions. Furthermore, a 3.0‐in. flexible active‐matrix organic light‐emitting diode was demonstrated with the highly reliable a‐IGZO TFT backplane on polyimide film. The polyimide film coating process is compatible with mass‐production lines. We believe that flexible organic light‐emitting diode displays can be mass produced using a‐IGZO TFT backplane on polyimide films.     

Microstructure and superconducting properties of rapidly-quenched copper-based alloys containing immiscible lead and bismuth elements

Copper-based superconducting alloys including finely dispersed f c c lead or h c p (Pb- Bi) particles in f c c copper matrix have been obtained by rapid quenching (Cu-M)_100-x Pb_x and (Cu-M)_100-x (Pb_0.6Bi_{0.4 x} (M = aluminium, silicon or tin;x < 10 at%) alloys containing immiscible elements such as lead and bismuth. The particle size and interparticle distance were about 30 to 130 nm and 20 to 200 nm for had particles and about 30 to 60 nm and 30 to 150 nm for (Pb- Bi) particles. The transition temperature,T _c, was in the range of 3.2 to 5.5 K for the Cu-M-Pb alloys and 6.2 to 6.3 K for the Cu-M-Pb-Bi alloys. Critical magnetic field,H _c2, and critical current density,J _c, for the later alloys were 0.47 to 0.93T at 4.2 K and 1.1 × 10⁵ to 2.7 × 10⁵ Am^–2 at zero applied field and 4.21 K. The mechanism of the appearance of such a soft-type superconductivity for the rapidly quenched copper-based alloys was discussed, and inferred to be due to the formation of a percolation path of a superconducting lead or Pb-Bi phase along the grain boundaries, sub-boundaries and/or tangled dislocations where the lead or Pb-Bi phase precipitated preferentially, rather than the proximity effect based on lead or Pb-Bi particles.     

A carboxyalkanethiol monolayer modified electrode for blocking of ascorbic acid oxidation and its application to a biosensor

Upon the application of amperometric biosensor to the biological fluid, ascorbic acid interferes the amperometric determination of analytes, because the oxidative potential of ascorbic acid is lower than that of electro active substances such as H₂O₂ produced by the enzymatic reaction. In this study we propose a method to block ascorbic acid based on the electrostatic interaction with self-assembled monolayer (SAM) and its application of the surface modified electrode to biosensor. In order to form SAM on the gold electrode with carboxyl group, 7-carboxy-heptanethiol (7-CHT) was used. The 7-CHT modified electrode did not show anodic response to ascorbic acid, but oxidized phenanthroline cobalt complex [Co(phen)₃²⁺], which can be used as a mediator of biosensor. Thus, the 7CHT-modified electrode was applied to biosensor mediated with Co(phen)₃²⁺. Fructose dehydrogenase (FDH) was immobilized to the 7-CHT modified electrode. Fructose was determined selectively with the FDH/7-CHT modified electrode at the range of 0.2-2 mM.     

Brillouin-Scattering Study of the Elastic Constants of ErVO4

The room-temperature elastic constants of ErVO₄ were considerably smaller than those of isostructural silicate and phosphate analogs. The generally "less-rigid" crystalline lattice and weaker metal-oxygen bond-strength in the RVO₄ (R = rare earth elements) phases indicates that these materials are of interest for potential applications as an interphase component in toughened oxide ceramic composites.     

Template‐Free Fabrication of Mesoporous Alumina Nanospheres Using Post‐Synthesis Water‐Ethanol Treatment of Monodispersed Aluminium Glycerate Nanospheres for Molybdenum Adsorption

This work reports the template‐free fabrication of mesoporous Al₂O₃ nanospheres with greatly enhanced textural characteristics through a newly developed post‐synthesis “water‐ethanol” treatment of aluminium glycerate nanospheres followed by high temperature calcination. The proposed “water‐ethanol” treatment is highly advantageous as the resulting mesoporous Al₂O₃ nanospheres exhibit 2–4 times higher surface area (up to 251 m² g^?1), narrower pore size distribution, and significantly lower crystallization temperature than those obtained without any post‐synthesis treatment. To demonstrate the generality of the proposed strategy, a nearly identical post‐synthesis “water treatment” method is successfully used to prepare mesoporous monometallic (e.g., manganese oxide (MnO₂)) and bimetallic oxide (e.g., CuCo₂O₄ and MnCo₂O₄) nanospheres assembled of nanosheets or nanoplates with highly enhanced textural characteristics from the corresponding monometallic and bimetallic glycerate nanospheres, respectively. When evaluated as molybdenum (Mo) adsorbents for potential use in molybdenum‐99/technetium‐99m (⁹⁹Mo/^99mTc) generators, the treated mesoporous Al₂O₃ nanospheres display higher molybdenum adsorption performance than non‐treated Al₂O₃ nanospheres and commercial Al₂O₃, thereby suggesting the effectiveness of the proposed strategy for improving the functional performance of oxide materials. It is expected that the proposed method can be utilized to prepare other mesoporous metal oxides with enhanced textural characteristics and functional performance.     

Using selective precipitant for uranyl ions — Fundamental studies for evaluating the precipitant performance

We have developed a simple reprocessing process for spent FBR fuels using N-cyclohexyl-2-pyrrolidone (NCP) which has selective precipitation ability for UO₂²⁺ ions. It was confirmed that NCP has sufficient precipitation ability for UO₂²⁺ ions, decontamination capability (separation of UO₂²⁺ from simulated fission products), and resistance to γ-ray radiation in nitric acid solutions. These findings indicate that NCP is applicable to our reprocessing process. We have also evaluated performances of other precipitants such as N-n-propyl-2-pyrrolidone (NProP), N-n-butyl-2-pyrrolidone (NBP), and N-n-butyl-2-pyridone (NBPyr). It was found that higher decontamination factors (DFs) are obtained by using NProP and NBP. This can be interpreted that the hydrophobicity of NProP and NBP is lower than that of NCP. Furthermore, we have obtained an experimental result that the resistance of NBPyr to γ-ray radiation is superior to that of NCP.     

Experimental study of bubbly swirling flow in a vertical tube using ultrasonic velocity profiler (UVP) and wire mesh sensor (WMS)

Two-phase air-water bubbly swirling flow through a pipe is a complex turbulent flow and its prediction is still challenging. The present paper describes the experimental investigation of the air-water bubbly swirling flow in vertical co-current flow. Swirling flow is induced by a twisted tape in a 20 mm inner diameter pipe. The flow is investigated using Ultrasonic velocity profiler (UVP), which allows the measurement of liquid and gas velocities simultaneously. Furthermore, simultaneous measurement of void fraction is performed using Wire mesh sensor (WMS). The experimental results reveal that swirling flow has significant impact on bubbles’ distribution. In low liquid flow rate, the average bubble velocity is fairly uniform along the radial position and void fraction increases in the near wall region. However, increasing liquid flow rate at constant gas flow rate leads to increase in void fraction in the core region, this is mainly due to drift velocity which is affected by centrifugal force. Experimental findings and parametric trends based on the effects of swirling flow are summarized and discussed.     

Nusselt number correlations for a microchannel heat exchanger hot water supplier with S-shaped fins

Using 3D-CFD code, Nusselt number correlations for a microchannel heat exchanger (MCHE) with S-shaped fins used for hot water suppliers are obtained through numerical experiments and then validated. The supercritical carbon dioxide working fluid is assumed to operate around the pseudo-critical point, where fluid properties change radically. Calculations with 20 different temperatures are executed to produce Nusselt number correlations for each side. The fluid inlet temperature in each calculation is defined as 2 °C lower or higher than the constant wall temperature, respectively, for cold and hot side simulations. The small temperature difference of 2 °C is sufficiently small to regard thermal–hydraulic properties as constant. A new integrating method using the correlations to calculate the heat-transfer-performance is proposed. The resultant heat-transfer-performance is compared with that of another numerical result, which is reduced from large geometry and integration. The results agree within 3% error; the calculation accuracy of the method is confirmed. Experimental results with MCHE verify the correlations. The difference is approximately 5%. Using few computer resources, these Nusselt number correlations and the heat-transfer-performance calculation methods using correlation information are sufficiently accurate to evaluate heat exchangers.