Effect of Mo on corrosion behavior of Ni20Cr–xMo alloys in air with NaCl–KCl–CaCl2 vapor at 570°C

The effect of Mo on the corrosion behavior of Ni20Cr–xMo alloys in an oxidizing chlorine-containing atmosphere using air mixed with the salt-vapor mixture of NaCl–KCl–CaCl₂ at 570°C was investigated. The results revealed that the corrosion performance of the Ni20Cr alloys in the oxidizing chlorine atmosphere was improved by Mo addition of up to 3 wt%. The Mo-free alloy formed a potassium chromate during corrosion as a result of the reaction between the Cr₂O₃ scale and KCl vapor. The chromate formation increased the chlorine potential at the scale surface and induced the breakdown of the protective Cr₂O₃ scale, resulting in internal chromium chloride precipitates and a Cr-depleted zone. In contrast, the presence of Mo resulted in the formation of a NiO scale, which did not react with the salt vapors and, therefore, prevented the formation of chromates. The beneficial effect of Mo on the high-temperature chlorination of Ni–Cr alloys in salt-vapor-containing atmospheres was ascribed to the suppression of chlorine generation due to NiO scale formation.     

A Method for Systematic Assessment of Intrinsically Disordered Protein Regions by NMR

Intrinsically disordered proteins (IDPs) that lack stable conformations and are highly flexible have attracted the attention of biologists. Therefore, the development of a systematic method to identify polypeptide regions that are unstructured in solution is important. We have designed an “indirect/reflected” detection system for evaluating the physicochemical properties of IDPs using nuclear magnetic resonance (NMR). This approach employs a “chimeric membrane protein”-based method using the thermostable membrane protein PH0471. This protein contains two domains, a transmembrane helical region and a C-terminal OB (oligonucleotide/oligosaccharide binding)-fold domain (named NfeDC domain), connected by a flexible linker. NMR signals of the OB-fold domain of detergent-solubilized PH0471 are observed because of the flexibility of the linker region. In this study, the linker region was substituted with target IDPs. Fifty-three candidates were selected using the prediction tool POODLE and 35 expression vectors were constructed. Subsequently, we obtained ¹⁵N-labeled chimeric PH0471 proteins with 25 IDPs as linkers. The NMR spectra allowed us to classify IDPs into three categories: flexible, moderately flexible, and inflexible. The inflexible IDPs contain membrane-associating or aggregation-prone sequences. This is the first attempt to use an indirect/reflected NMR method to evaluate IDPs and can verify the predictions derived from our computational tools.     

The effect of the quality-oriented production approach on the delivery of prefabricated homes in Japan

During the 1960s and 1970s, Japanese housingmanufacturers focused solely on the `massproduction' of their products, resulting in asupply of virtually identical, rathermonotonous houses. Due to the `inferior' imageassociated with the low-quality appearance ofthese houses, the public immediately rejectedthem. Since then, manufacturers have placedgreater emphasis on improving industrializedhousing quality, and thereby customersatisfaction, such that today Japanese housingmanufacturers enjoy a reputation for providingquality housing that, while stillmass-produced, is customized – i.e., `masscustomization'.In order to meet today's diverse demands forhousing, Japanese manufacturers apply a quality-oriented production approach in themanufacturing of industrialized homes based ona cost-performance marketing strategy,which considerably increases housing quality byproviding standard fittings. As a result,even though affordable homes are still ingreat demand, manufacturers have actually beensuccessful in producing and marketing more expensive high-quality homes. This studyexamines the effect of the quality-orientedproduction approach on the delivery ofprefabricated homes in Japan, and highlightsthe interrelationship between thequality-oriented industrialized productionmethod that, in theory, helps reduceproduction costs and the marketing strategiesaimed at maintaining relatively highretail housing prices.     

Organic–inorganic nanomatrix structure and properties of related naturally occurring rubbery macromolecules

The outstanding mechanical properties of soft materials i.e. natural rubber are partly due to the organic–inorganic nanomatrix structure because numerous organic microparticles are dispersed in a small amount of an inorganic nanomatrix composed of inorganic nanoparticles and organic macromolecules. Here we form an organic–inorganic nanomatrix using graft-copolymerization of a vinyl monomer with an inorganic oxide precursor onto natural rubber particles with an average diameter of 1 μm dispersed in water. The inorganic oxide precursor is converted into inorganic oxide nanoparticles through hydrolysis and condensation, forming chemical linkages between natural rubber microparticles and inorganic oxide nanoparticles. Transmission electron microscopy indicates that the organic–inorganic nanomatrix is densely filled with inorganic oxide nanoparticles and the natural rubber microparticles are dispersed in the nanomatrix. This nanomatrix composite realizes both energetic elasticity and entropic elasticity of a soft material, opening a novel field of building block chemistry with respect to a pair of organic microparticles and inorganic nanoparticles.     

Boiling heat transfer characteristics of a sulfuric-acid flow in thermochemical iodine–sulfur cycle

The Japan Atomic Energy Agency has been conducting research and development on the thermo-chemical iodine–sulfur (IS) process, which is one of the most attractive water-splitting hydrogen production methods that uses nuclear thermal energy. The sulfuric acid decomposer is one of the key components of the IS process. The boiling heat transfer coefficients of sulfuric acid solutions are required to design the sulfuric acid decomposer. These coefficients were measured in aqueous solutions where the mole fraction of H₂O ranged from 0.17 to 0.37 (heat flux range from 16.9 kW/m² to 5.6 kW/m²) and compared with the empirical correlations formulated for binary mixtures. A combination of the Stephan–Körner correlation, using the empirical constant A₀ = 2.00, and the Nishikawa–Fujita correlation was used to predict the experimental results with an accuracy of ±10%.     

Erythropoietin Action in Stress Response,Tissue Maintenance and Metabolism

Erythropoietin (EPO) regulation of red blood cell production and its induction at reduced oxygen tension provides for the important erythropoietic response to ischemic stress. The cloning and production of recombinant human EPO has led to its clinical use in patients with anemia for two and half decades and has facilitated studies of EPO action. Reports of animal and cell models of ischemic stress in vitro and injury suggest potential EPO benefit beyond red blood cell production including vascular endothelial response to increase nitric oxide production, which facilitates oxygen delivery to brain, heart and other non-hematopoietic tissues. This review discusses these and other reports of EPO action beyond red blood cell production, including EPO response affecting metabolism and obesity in animal models. Observations of EPO activity in cell and animal model systems, including mice with tissue specific deletion of EPO receptor (EpoR), suggest the potential for EPO response in metabolism and disease.     

Are hybrid sit–stand postures a good compromise between sitting and standing?

Potential alternatives for conventional sitting and standing postures are hybrid sit-stand postures (i.e. perching). The purposes of this study were (i) to identify where lumbopelvic and pelvic angles deviate from sitting and standing and (ii) to use these breakpoints to define three distinct postural phases: sitting, perching, and standing, in order to examine differences in muscle activations and ground reaction forces between phases. Twenty-four participants completed 19 1-min static trials, from sitting (90°) to standing (180°), sequentially in 5°trunk–thigh angle increments. The perching phase was determined to be 145–175° for males and 160–175° for females. For both sexes, knee extensor activity was lower in standing compared to perching or sitting (p < .01). Anterior–posterior forces were the highest in perching (p < .001), requiring ～15% of body-weight. Chair designs aimed at reducing the lower limb demands within 115–170° trunk–thigh angle may improve the feasibility of sustaining the perched posture.

Practitioner summary: Individuals who develop low back pain in sitting or standing may benefit from hybrid sit-stand postures (perching), yet kinematic and kinetic changes associated with these postures have not been investigated. Perching can improve lumbar posture at a cost of increased lower limb demands, suggesting potential avenues for chair design improvement.

Abbreviations: A/P: anterior-posterior; M/L: medial-lateral; LBP: low back pain; EMG: electromyography; TES: thoracic erector spinae; LES: lumbar erector spinae; VMO: vastus medialis obliquus; MVC: maximum voluntary contraction; ASIS: anterior superior iliac spine; PSIS: posterior superior iliac spine; BW: body weight; RMSE: root mean square error; SD: standard deviation; ROM: range of motion     

Navigation behavior based on self-organized spatial representation in hierarchical recurrent neural network

ABSTRACT

A cognitive map is an internal model of the external world and contains the spatial representation of the surrounding environment. The existence of the cognitive map was first identified in rats; rats can navigate to their desired destination using cognitive maps while dealing with environmental uncertainty. We performed a mobile robot navigation experiment where obstacles were randomly placed using hierarchical recurrent neural network (HRNN) with multiple timescales. The HRNN was trained to navigate the mobile robot to the destination indicated by a snapshot image. After the training, the HRNN was able to successfully avoid the obstacles and navigate to the destination from any location in the environment. Analysis of the internal states of the HRNN showed that the module with fast timescale handles obstacle avoidance and the one with slow timescale has spatial representation corresponding to the spatial position of the destination. Moreover, in the experiment wherein the novel path appeared, the trained HRNN performed shortcut behavior. The shortcut behavior shows that the HRNN performed navigation using the self-organized spatial representation in the slow recurrent neural network. This indicates that training of goal-oriented navigation, i.e. the navigation motivated by a snapshot image of the destination results in the self-organization of cognitive map-like representation.     

香港部屋 日本新潟县

<正>香港部屋座落在日本新潟县中鱼沼郡津南町内的一个村落里。津南的上乡被大自然紧紧包围着,是一个有大树,有小草,充满着雪国风貌的青葱之地。为了不打扰这份自然和宁静,LAAB以融入作为设计理念,希望香港部屋成为这个村落的一部分。屋顶微微倾侧,和村落中此起彼落的民居建筑物互相呼应。LAAB用新潟当地的鱼沼杉木和常见的镀铁板