Gradient-based adaptive modeling for IoT data transmission reduction

Wireless Networks - Spatial and temporal correlation between sensor observations in an Internet of Things environment can be exploited to eliminate unnecessary transmissions. Transmitting less data...     

基于数值微分核脉冲信号数字处理方法

核反应堆核测量系统测量探测器输出的核脉冲信号，该信号后沿拖尾很长，在计数率较高时容易产生信号堆积和基线漂移等问题，导致源区计数率测量上限仅能达到105 Hz左右。文中基于数值微分方法，采用数字处理技术，在时域上分析了核脉冲信号经过前置放大、信号成形、低通滤波和脉冲甄别后的输出，并利用探测器实测信号进行了仿真。仿真结果表明，基于数值微分的数字处理方法可以实现相邻0.4 μs脉冲信号的识别和测量，将源区测量计数率上限提升到2×106 Hz以上。      

Multi-dimensional Data Quality Evaluation Method for Intelligent Distribution Network

正With the improvement of the information level of the intelligent distribution network,power enterprises have accumulated a large amount of data,and the quality problems such as data anomaly and redundancy are becoming increasingly prominent.In this context,this paper proposes a multi-dimensional data quality     

Combinatorial Immunophenotyping of Cell Populations with an Electronic Antibody Microarray

Immunophenotyping is widely used to characterize cell populations in basic research and to diagnose diseases from surface biomarkers in the clinic. This process usually requires complex instruments such as flow cytometers or fluorescence microscopes, which are typically housed in centralized laboratories. Microfluidics are combined with an integrated electrical sensor network to create an antibody microarray for label‐free cell immunophenotyping against multiple antigens. The device works by fractionating the sample via capturing target subpopulations in an array of microfluidic chambers functionalized against different antigens and by electrically quantifying the cell capture statistics through a network of code‐multiplexed electrical sensors. Through a combinatorial arrangement of antibody sequences along different microfluidic paths, the device can measure the prevalence of different cell subpopulations in a sample from computational analysis of the electrical output signal. The device performance is characterized by analyzing heterogeneous samples of mixed tumor cell populations and then the technique is applied to determine leukocyte subpopulations in blood samples and the results are validated against complete blood cell count and flow cytometry results. Label‐free immunophenotyping of cell populations against multiple targets on a disposable electronic chip presents opportunities in global health and telemedicine applications for cell‐based diagnostics and health monitoring.     

Nacre-Inspired,Liquid Metal-Based Ultrasensitive Electronic Skin by Spatially Regulated Cracking Strategy

The realization of liquid metal-based wearable systems will be a milestone toward high-performance, integrated electronic skin. However, despite the revolutionary progress achieved in many other components of electronic skin, liquid metal-based flexible sensors still suffer from poor sensitivity due to the insufficient resistance change of liquid metal to deformation. Herein, a nacre-inspired architecture composed of a biphasic pattern (liquid metal with Cr/Cu underlayer) as “bricks” and strain-sensitive Ag film as “mortar” is developed, which breaks the long-standing sensitivity bottleneck of liquid metal-based electronic skin. With 2 orders of magnitude of sensitivity amplification while maintaining wide (>85%) working range, for the first time, liquid metal-based strain sensors rival the state-of-art counterparts. This liquid metal composite features spatially regulated cracking behavior. On the one hand, hard Cr cells locally modulate the strain distribution, which avoids premature cut-through cracks and prolongs the defect propagation in the adjacent Ag film. On the other hand, the separated liquid metal cells prevent unfavorable continuous liquid-metal paths and create crack-free regions during strain. Demonstrated in diverse scenarios, the proposed design concept may spark more applications of ultrasensitive liquid metal-based electronic skins, and reveals a pathway for sensor development via crack engineering.     

Thermodynamic performance study of a new SOFC–CCHP system with diesel reforming by CLHG to produce hydrogen as fuel

In this paper, a combined cooling, heating and power system based on diesel-fueled chemical looping hydrogen generation and solid oxide fuel cell, and with CO₂ capture was established. The system can achieve efficient power generation while separating CO₂ without energy consumption, and effectively avoid the carbon deposition problem. Aspen software is used to simulate the process of the system, and FORTRAN program is used to calculate, through the thermodynamic analysis model, the unique performance change law of the new system using diesel is obtained, and thermodynamic analysis is performed on the system at last. The results show that the power efficiency of the new system is 54.1%, while the exergy efficiency and fuel energy saving ratio can reach 53%. At the same time, the influence of fuel flow and fuel utilization factor on the system performance does not continue to increase or decrease, and the system performance parameters will have a peak value with the change of pressure. The results not only provide a theoretical basis for the future construction of new diesel-fueled energy supply system, but also provide a new idea for the optimization scheme of energy-saving system and carbon recovery.     

消防监督检查中对火灾隐患的认定探析

文章将重点阐述消防监督检查中对火灾隐患的认定,并从实际角度出发,充分的考虑可能存在的问题,具体问题具体分析,制定相应的解决对策,以保证消防监督检查工作能够顺利的开展.     

广东早期砖薄壳结构的建构技术研究——1957-1958年新会的"逼拱"实验

揭示1957-1958年华南工学院土木系薄壳结构研究小组在新会的砖薄壳结构实验图景.以田野调查、文献分析、三维图示、超声波检测等方法发现、确认此研究小组在新会的6处薄壳建筑及其遗存情况.它们是广东地区推广砖薄壳建筑的起点,其中的回旋砖薄壳实验是从结构角度探索中国建筑民族形式的重要案例,弥补国内结构工程史学研究的薄弱点,也是共和国早期节约"三材"约束下的薄壳建造技术自主创新设计的重要内容.