Electrochemical investigations on amorphous Fe-base alloys for alkaline water electrolysis

In this work different amorphous melt-spun Fe-alloys (Fe₈₂B₁₈, Fe₈₀Si₁₀B₁₀, Fe₆₀Co₂₀Si₁₀B₁₀) were investigated as cathode materials for the alkaline electrolysis of water. In particular, the influence of cobalt as well as the metalloids boron and silicon on the activity for the hydrogen evolution reaction (HER) was studied in 1 M KOH at 298 K using cyclic voltammetric, galvanostatic and polarization techniques. The electrocatalytic activity was evaluated in the view of the overpotential. It was found that cyclic voltammetric techniques can be used to activate the melt-spun Fe-alloys strongly. Different cyclic voltammetric activation procedures are discussed and the influence of the sweep rate and the potential window on the HER activity was elucidated. The experimental data indicate that the addition of metalloids and, most importantly, of cobalt improves the HER activity of the materials. Thus, the overpotential can be reduced by 200 mV compared to polycrystalline Ni.     

Efficient polymer nanocrystal hybrid solar cells by improved nanocrystal composition

We demonstrate the importance of the nanocrystal surface treatment and the inorganic composition for hybrid solar cells. Mixtures of CdSe nanorods and CdSe quantum dots integrated in hybrid solar cells together with the conjugated polymer poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b']-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) perform better than nanorod and quantum dot only based devices. In addition larger sized quantum dots show a similar improvement after integration in respective solar cells. Power conversion efficiency values exceeding 3% are observed. A first result on the shelf lifetime of such a device is highlighted.     

Preparation and soft lithographic printing of nano-sized ITO-dispersions for the manufacture of electrodes for TFTs

The production of printed electronics exhibits an enormous economical potential due to the possibility to manufacture innovative products at low cost. At the moment, one of the major challenges for the fabrication of printed electronics is the controllability of the material properties during processing and the miniaturization of the deposited structures. In this context, the application of soft lithographic techniques appears promising, because they allow a defined patterning of the materials in the range of few nanometers, which is far below the limits of other printing techniques like inkjet-printing or screen printing. This work proves the applicability of the soft lithographic technique micro-molding in capillaries (MIMIC) for the manufacture of conductive indium tin oxide (ITO) electrodes. For the creation of stable dispersions of ITO nano-sized particles, steric as well as electrostatic stabilization concepts are applied. The prepared dispersions are characterized with regard to the later processing via MIMIC. The geometry and the electrical properties of the soft lithographically deposited structures are determined to prove their functionality. Special attention is paid to the influence of the wetting behavior of the dispersions on the resulting geometry of the structures. Finally, the applicability of the optimized structures is demonstrated by the assembly of a thin film transistor (TFT), in which the deposited structures serve as source and drain electrodes.     

GaAs FET demodulator and down-convertor for optical-microwave links

A single-gate GaAs FET is utilised to simultaneously perform the photodetection and down-conversion functions of an optical-microwave link receiver, with the transistor supplying its own local oscillator signal through self-oscillation and harmonic generation. Operation up through 89 GHz is demonstrated.     

Technische Möglichkeiten und Akzeptanz mobiler Anwendungen

Mobile data communication applications, referred to in this paper as mobile applications, were one of the technological innovation and investment targets in recent years. From the past it became obvious that mono-disciplinary approaches to investigate mobile applications have shortcomings when it comes to successful innovation and investment decisions as interdependencies are insufficiently addressed. The paper therefore aims at structuring the scientific contributions of computer science, business economics and sociology in the context of mobile applications to approximate a holistic understanding comprising technological feasibility, economic opportunities and human needs.     

Microwave channelized active filters-a new modular approach toachieving compactness and high selectivity

The new class of microwave active filters being presented offers a convenient way to realize miniature filter circuits with sharp passband-to-stopband transitions. The approach, which lends itself to a broad range of narrowband and wideband filtering applications, involves parallel connections of frequency-selective, unilateral network branches that contain both passive and active subcircuits. Highly selective filtering action derives from controlled interferences among branch signal components. Attributes of the new technique include unconditional circuit stability, tolerance for large passive-circuit-element losses, practicability of narrowband lumped-element configurations, graceful performance degradation with active element parameter changes, and the advantage of module-based procedures for design and implementation. The broad applicability of the new approach is illustrated with three experimental demonstration circuits that employ off-the-shelf MMIC amplifier chips. The circuits comprise a 10-GHz notch filter of one quarter percent bandwidth, a 10-GHz bandpass filter of two percent bandwidth, and a 7.5-GHz lowpass filter     

Automatic detection of conserved RNA structure elements in complete RNA virus genomes

We propose a new method for detecting conserved RNA secondary structures in a family of related RNA sequences. Our method is based on a combination of thermodynamic structure prediction and phylogenetic comparison. In contrast to purely phylogenetic methods, our algorithm can be used for small data sets of approximately 10 sequences, efficiently exploiting the information contained in the sequence variability. The procedure constructs a prediction only for those parts of sequences that are consistent with a single conserved structure. Our implementation produces reasonable consensus structures without user interference. As an example we have analysed the complete HIV-1 and hepatitis C virus (HCV) genomes as well as the small segment of hantavirus. Our method confirms the known structures in HIV-1 and predicts previously unknown conserved RNA secondary structures in HCV.     

Disturbance of continuous, pump administration of cardiovascular drugs by hydrostatic pressure

Administration of highly concentrated, highly potent, and therefore highly dangerous drugs with syringe pumps is common in modern anaesthesia as well as in intensive care and emergency medicine. Because of their exact flow rates down to < 1 ml/h, these pumps are predestined for delivery of drugs with short half-lives, such as catecholamines and vasodilators. But intravenous application of drugs with syringe pumps is not without problems. While it is well known that syringes not fixed correctly into the pump can empty themselves by the influence of gravity, it seems not to be known that hydrostatic pressure can influence the flow rate of a correctly connected system even during continuous infusion. In this situation a change of height of the syringe pump in relation to the patient's position can have tremendous effects on hemodynamics due to unintended acceleration or deceleration of the flow rate. This case report demonstrates that the elevation of a connected epinephrine pump while moving a cardiac surgery patient after ACB operation from the operation table into his bed led to critical increases of heart rate, blood pressure and left atrial pressure. In order to quantify the problem we repeated the situation experimentally. It could be demonstrated that the elevation of the syringe pump by 80-100 cm delivers an additional bolus of 4-5 drops as the central venous catheter outlet. Lowering the pump consecutively leads to the opposite effect. In the case reported, the accidentally administered bolus of epinephrine was 12-15 micrograms (we use a concentration of 60 micrograms/ml epinephrine for continuous infusion with syringe pumps). From this accidental observation the following conclusion can be drawn: The change of height, in relation to the patient's position, of a running syringe pump during continuous infusion of highly concentrated cardiovascular drugs may cause considerable, even life-threatening hemodynamic disorders. Even in a closed infusion system (syringe-extension-central venous catheter), hydrostatic pressure influences infusion rate. Elevation of the pump leads to unintended bolus administration, and lowering of the pump is followed by an interruption of the infusion. In the knowledge of this phenomenon, unexpected hemodynamic reactions during transport of critically ill patients cannot always be interpreted as a result of inadequate anesthesia or volume load, but may be a consequence of incorrect handling of the syringe pumps as described in this report.     

Interaction of CO with planar Au/TiO2 model catalysts at elevated pressures

The interaction of CO with structurally well-defined, planar Au/TiO₂ model catalysts at elevated pressures (up to 50 mbar) was studied in-situ by polarization-modulated infrared reflection absorption spectroscopy and ex-situ by X-ray photoelectron spectroscopy performed before and after CO exposure. The results indicate a CO-induced partial reduction of the oxide surface, which is evidenced by a low frequency C–O vibration at 2060 cm⁻¹, combined with a spreading of the Au nanoparticles due to a modification of the Au-oxide interface energy. In a 2:1 CO:O₂ atmosphere, TiO₂ support reduction was not observed, and a pre-reduced surface was re-oxidized. The consequences of these results for the understanding of the CO oxidation mechanism on Au/TiO₂ (model) catalysts are discussed.     

Investigation of the nucleation and growth mechanisms of nanocrystalline diamond/amorphous carbon nanocomposite films

Nucleation and growth, but especially the development of the morphology of nanocrystalline diamond/amorphous carbon (NCD/a-C) nanocomposite films have been investigated by systematic variation of three important parameters, namely the deposition time, the growth rate, and the substrate pre-treatment used to enhance the nucleation density. The films have been characterized, among others, by scanning electron microscopy, atomic force microscopy, and Fourier transform infrared spectroscopy. It is shown that, by successive addition of ultradispersive diamond powder to the suspension of nanocrystalline diamond powder in n-pentane used for the ultrasonic pre-treatment, the nucleation density can be enhanced by two orders of magnitude from 1 · 10⁸ cm^− 2 to > 1 · 10¹⁰ cm^− 2. This reduces the thickness required to achieve closed films from 1 µm to 100 nm. However, once coalescence of the individual nodules emerging from the nucleation sites has taken place the films loose “memory” of the nucleation step and start to develop the typical NCD morphology consisting of larger features with diameters of some hundreds of nm which are in turn composed of much smaller features. Irrespective of the feature size and of the parameters used, the films of this investigation possess AFM rms roughnesses of 9–13 nm, indicating that rms values are not sufficient to characterize NCD surfaces.