In-fibre LP11–LP21 mode conversion using force-induced long-period fibre gratings with polarization controllers

ABSTRACT

Mode conversion between higher-order modes is attained in a step-index four mode fibre using an in-line polarization controller followed by a force-induced long period fibre grating. By adjusting the field orientation of the LP₁₁ mode to the antisymmetric fibre grating, the LP₁₁ mode is converted to the LP₂₁ mode with a spatially periodic force of 50 N along the fibre length of 50?mm. The mode conversion is evaluated by observing the far-field and near-field patterns of the fibre output and by comparing the transmitted optical power with and without the additional two-mode fibre. The phase-matching grating period is required of the accuracy of roughly ±5?μm and the radiation loss during the mode conversion is as low as 0.01?dB.     

Dynamic Stabilization of DNA Assembly by Using Pyrrole-Imidazole Polyamide

We used N-methylpyrrole (Py)-N-methylimidazole-(Im) polyamide as an exogenous agent to modulate the formation of DNA assemblies at specific double-stranded sequences. The concept was demonstrated on the hybridization chain reaction that forms linear DNA. Through a series of melting curve analyses, we demonstrated that the binding of Py−Im polyamide positively influenced both the HCR initiation and elongation steps. In particular, Py−Im polyamide was found to drastically stabilize the DNA duplex such that its thermal stability approached that of an equivalent hairpin structure. Also, the polyamide served as an anchor between hairpin pairs in the HCR assembly, thus improving the originally weak interstrand stability. We hope that these proof-of-concept results can inspire future use of Py−Im polyamide as a molecular tool to modulate the formation of DNA assemblies.     

Characteristics of hydrogen-assisted intergranular fatigue crack growth in interstitial-free steel: role of plastic strain localization

The behavior of intergranular fatigue crack growth in an interstitial-free (IF) steel in a hydrogen environment was investigated at different frequencies. Focusing on the plastic strain localization, we observed details of the striation-like feature on the intergranular fracture surface, slip behavior around microvoids, and crystallographic orientation gradient underneath the fracture surface. It was determined that the intergranular fatigue crack growth mechanism in the IF steel is microvoid formation at the crack tip and subsequent coalescence with the crack. Moreover, it was found that the grain boundaries, acting as propagation paths, suffer from pre-damage arising from plastic strain localization near the grain boundaries even before the main crack propagates to a certain location. Therefore, fatigue cracks in a hydrogen environment easily propagate to the grain boundaries. The frequency dependence of fatigue crack growth in the hydrogen environment is significantly smaller than that in a low carbon steel, probably because of the frequency dependence of the pre-damage evolution behavior.     

Package Design of Ready-to-Drink Coffee Beverages Based on Food <Emphasis Type="Italic">Kansei</Emphasis> Model—Effects of Straw and Cognition Terms on Consumer’s Pleasantness

To design a consumer-oriented package that complements the taste and aroma of ready-to-drink chilled-cup coffee beverages by using the food kansei model, the effects of the diameter and the color of drinking straws as well as the cognition terms of coffee on consumer sensory characteristics and preferences were investigated. Variance and factor analyses of the sensory scores for chilled-cup coffee with milk and sugar using straws of different diameters, as rated by consumer panelists, extracted two perceived factors (F1, contribution ratio 36.5%, and F2, 28.6%). A two-dimensional plot of the average F1 and F2 scores of 123 panelists showed that the perceived characteristics of the same taste and aroma varied according to the straw diameter. An image investigation of different straw colors and another sensory evaluation using “black,” “brown,” and “green” straws were also performed. A principal component analysis of the image data revealed that the sensory characteristics of coffee with milk and sugar were imaged from the straw color. The second evaluation suggested that the images of straw colors affected the sensory characteristics. In addition, cluster and multiple-comparison analyses of Internet research data from consumers regarding the cognition terms for coffee exhibited three clusters representing the cognitive characteristics of terms by consumers and by developers and the differences of attractiveness degree on the cognition terms due to the consumers’ personal attributes. These studies provide useful information for the development of packages of chilled-cup coffee beverages.     

Model Test and Consolidation Analysis of Failure of a Loose Sandy Embankment Dam During Seepage

Failures of earth dam embankments and river dikes, which are constructed of sandy soils with low dry densities, have been observed to occur during rising of water levels. In this paper, a large-scale physical model test was conducted in order to investigate the behavior of a small dam embankment as water levels rose. The test results were simulated by use of a consolidation analysis method coupled with an elastoplastic model for unsaturated soils. All parameters used in the simulation were obtained from element tests; oedometer, triaxial compression, soil water retention, and permeability tests. First, in order to verify the parameters identified, direct shear tests were simulated using the consolidation analysis method; results of the simulation and the tests were consistent. From the embankment model test it was found that the crest of the embankment moved upstream at the first stage of impounding and then moved back. After a seepage surface appeared on the downstream slope, tension cracks occurred on the downstream slope, and sliding occurred through the crack and the downstream toe. The results of the simulation were consistent with those of the model test. This consolidation analysis method could be used to simulate the complex deformations induced by saturation collapse and shear strains and even failure behavior. Old embankments constructed with loose densities might have histories in which cracks occurred on the downstream slopes when the reservoir water level rose, and their stabilities might have decreased.     

Hydrostatic Pressure Influences HIF-2 Alpha Expression in Chondrocytes

Hypoxia-inducible factor (HIF)-2α is considered to play a major role in the progression of osteoarthritis. Recently, it was reported that pressure amplitude influences HIF-2α expression in murine endothelial cells. We examined whether hydrostatic pressure is involved in expression of HIF-2α in articular chondrocytes. Chondrocytes were cultured and stimulated by inflammation or hydrostatic pressure of 0, 5, 10, or 50 MPa. After stimulation, heat shock protein (HSP) 70, HIF-2α, nuclear factor kappa B (NF-κB), matrix metalloproteinase (MMP)-13, MMP-3, and vascular endothelial growth factor (VEGF) gene expression were evaluated. The levels of all gene expression were increased by inflammatory stress. When chondrocytes were exposed to a hydrostatic pressure of 5 MPa, HIF-2α, MMP-13, and MMP-3 gene expression increased significantly although those of HSP70 and NF-κB were not significantly different from the control group. In contrast, HIF-2α gene expression did not increase under a hydrostatic pressure of 50 MPa although HSP70 and NF-κB expression increased significantly compared to control. We considered that hydrostatic pressure of 5 MPa could regulate HIF-2α independent of NF-κB, because the level of HIF-2α gene expression increased significantly without upregulation of NF-κB expression at 5 MPa. Hydrostatic pressure may influence cartilage degeneration, inducing MMP-13 and MMP-3 expression through HIF-2α.     

Characterization of gold nanoparticle binding to microtubule filaments

Microtubule (MT) protein filaments were used as templates for fabricating Au nanowires as a bottom-up approach for fabricating building blocks for future integrated circuits. Photochemical reduction methods were employed to form Au nanoparticles which bind and uniformly cover the MT filaments. Synthesis of the MT-templated Au nanowires was characterized using UV/vis spectroscopy and transmission electron microscopy (TEM). In addition, binding between the MT filaments and Au nanoparticles was investigated using surface enhanced Raman spectroscopy (SERS) and X-ray photoelectron spectroscopy (XPS) to establish the nature of the binding sites. A variety of functional groups were identified by SERS to interact with the Au including imidazole, sulfur, aromatic rings, amine, and carboxylate. The imidazole ring in the histidine is the most prominent functional group for Au binding. The results from these studies provide better understanding of the binding between Au and the biotemplate and give insight concerning methods to improve Au coverage for MT-templated Au nanowires.