Qualitative response of safety injection system for a large size break in the reactor coolant system cold leg

Safety injection system, accumulator injection system and residual heat removal system of CHASNUPP-1 were simulated using the computer code APROS. We observed the qualitative response of the simulated system during injection and re-circulation phases after LOCA. During rapid depressurization of SRC system due to leakage, these systems started coolant injection in the SRC system as per plant requirement. Different thermal-hydraulic parameters of the respective systems are presented and discussed. Results obtained are in good agreement with the reported document of the reference power plant.     

Energy-efficient clustering in mobile ad-hoc networks using multi-objective particle swarm optimization

A mobile ad hoc network (MANET) is dynamic in nature and is composed of wirelessly connected nodes that perform hop-by-hop routing without the help of any fixed infrastructure. One of the important requirements of a MANET is the efficiency of energy, which increases the lifetime of the network. Several techniques have been proposed by researchers to achieve this goal and one of them is clustering in MANETs that can help in providing an energy-efficient solution. Clustering involves the selection of cluster-heads (CHs) for each cluster and fewer CHs result in greater energy efficiency as these nodes drain more power than noncluster-heads. In the literature, several techniques are available for clustering by using optimization and evolutionary techniques that provide a single solution at a time. In this paper, we propose a multi-objective solution by using multi-objective particle swarm optimization (MOPSO) algorithm to optimize the number of clusters in an ad hoc network as well as energy dissipation in nodes in order to provide an energy-efficient solution and reduce the network traffic. In the proposed solution, inter-cluster and intra-cluster traffic is managed by the cluster-heads. The proposed algorithm takes into consideration the degree of nodes, transmission power, and battery power consumption of the mobile nodes. The main advantage of this method is that it provides a set of solutions at a time. These solutions are achieved through optimal Pareto front. We compare the results of the proposed approach with two other well-known clustering techniques; WCA and CLPSO-based clustering by using different performance metrics. We perform extensive simulations to show that the proposed approach is an effective approach for clustering in mobile ad hoc networks environment and performs better than the other two approaches.     

Your comments matter: incorporating viewers’ comments for ranking online video content using bibliometrics

ABSTRACT

The quality of user-generated content over World Wide Web media is a matter of serious concern for both creators and users. To measure the quality of content, webometric techniques are commonly used. In recent times, bibliometric techniques have been introduced to good effect for evaluation of the quality of user-generated content, which were originally used for scholarly data. However, the application of bibliometric techniques to evaluate the quality of YouTube content is limited to h-index and g-index considering only views. This paper advocates for and demonstrates the adaptation of existing Bibliometric indices including h-index, g-index and M-index exploiting both views and comments and proposes three indices h_vc, g_vc and m_vc for YouTube video channel ranking. The empirical results prove that the proposed indices using views along with the comments outperform the existing approaches on a real-world dataset of YouTube.     

Adaptive dynamic surface control of a hypersonic flight vehicle with improved tracking

This work presents a nonlinear adaptive dynamic surface air speed and a flight path angle control design procedure for the longitudinal dynamics of a generic hypersonic flight vehicle. The proposed design scheme takes into account the magnitude, rate, and bandwidth constraints on the actuator signals. A new approach is used to enhance tracking performance and avoid a large initial control signal. The uncertain nonlinear functions in the flight vehicle model are approximated by using radial basis function neural networks. A detailed stability analysis of the designed controllers shows that all the signals of the closed‐loop system are uniformly ultimately bounded. The robust performance of the design scheme is verified through numerical simulations of the flight vehicle model for various parameter variation test cases. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Iterative methods for solving extended general mixed variational inequalities

In this paper, we introduce and consider a new class of mixed variational inequalities involving four operators, which are called extended general mixed variational inequalities. Using the resolvent operator technique, we establish the equivalence between the extended general mixed variational inequalities and fixed point problems as well as resolvent equations. We use this alternative equivalent formulation to suggest and analyze some iterative methods for solving general mixed variational inequalities. We study the convergence criteria for the suggested iterative methods under suitable conditions. Our methods of proof are very simple as compared with other techniques. The results proved in this paper may be viewed as refinements and important generalizations of the previous known results.     

Formulation and characterisation of nanosuspension of herbal extracts for enhanced antiradical potential

Nanotechnology is a promising technique to increase the bioavailability of herbal medicines. This paper presents the nanosuspension approach for increasing the aqueous solubility and thereby bioactivity of important herbal extracts. Nanosuspensions of the seeds of three plants extract (Silybum marianum, Elettaria cardamomum and Coriandrum sativum) were prepared by using polyvinyl alcohol (1.5% w/v) as a stabiliser. Prepared nanoparticles were characterised by scanning electron microscope. Activity of nanosuspension formulation was assessed by using four in vitro antioxidant assays. S. marianum, E. cardamomum and C. sativum particle size was observed to fall in range of 446.1 ± 112.6, 456.63 ± 339.2 and 432.1 ± 172.8 nm, respectively, most of the particles were having spherical shape and smooth topology. These synthesised nanoparticles were found to be more effective against quenching free radical than their crude extracts and standards [butylated hydroxyl toluene and ascorbic acid]. C. sativum nanosuspension showed most free radical scavenging potential against 2,2-diphenyl-1-picrylhdrazyl (DPPH) and superoxide free radical scavenging assays (IC₅₀ 0.59 ± 0.01 and 0.81 ± 0.11 mg/ml). S. marianum nanosuspension was found to be most effective against DPPH radicals scavenging (IC₅₀ 0.34 ± 0.02 mg/ml). It was concluded that nanosuspension of herbal medicines potentiates the antioxidant potential.     

Group SkSP-R sampling plan for accelerated life tests

This study presents a group skip-lot sampling plan using resampling (SkSP-R) for accelerated life tests. It is assumed that the lifetime of a product follows Weibull distribution with known shape parameter under the use condition, while the scale parameter can be obtained from acceleration factor. The plan parameters are determined through a non-linear optimisation problem for fixed values of producer’s risk and consumer’s risk. The advantages of the proposed plan over the existing one are explained with some practical examples.     

Effect of Surface Finish on the Pitting Corrosion Behavior of Sensitized AISI 304 Austenitic Stainless Steel Alloys in 3.5% NaCl Solutions

The effect of surface condition down to 120 and 1000-grit finish, corresponding to 1.47 and 0.06 microns RMS (Root Mean Square), respectively, on the pitting corrosion behavior of sensitized and mill-annealed AISI (American iron and steel institute) 304 stainless steel was studied in 3.5% NaCl solutions at 23 and 50°C by electrochemical methods. The polarization curves have revealed a clear dependence of pitting corrosion on the surface finish, on the degree of sensitization, as well as on the test temperature. Surface condition has made a significant contribution to pit initiation in that the pitting potential was lowered as the surface roughness increased. The deleterious effect of surface roughness on the pitting potential of the AISI 304 stainless steel alloy in 3.5% NaCl is more pronounced on sensitized samples and becomes more evident with increasing sensitization time and test temperature.