Characterization,in vitro bioactivity and biological studies of sol-gel-derived TiO2 substituted 58S bioactive glass

Bioactive glasses (BGs) have been used for bone formation and bone repair processes in recent years. This study investigated the titanium substitution effect on 58S BGs (Ti-BGs) 60SiO₂-(36 − X)CaO-4P₂O₅-XTiO₂ (X = 0, 3, and 5 mol.%) prepared by the sol-gel technique, and the main goal was to find the optimum amount of titanium in Ti-BGs. Synthesized BGs, which were investigated after immersion in simulated body fluid (SBF), were tested by X-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy. Moreover alkaline phosphate (ALP) activity, 3-(4,5dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and antibacterial studies were employed to investigate the biological properties of Ti-BGs. According to the FTIR and XRD test results, hydroxyapatite (HA) formation on Ti-BGs surfaces was confirmed. Meanwhile, the presence of 5 mol.% compared to 3 mol.% increased the HA grain distribution and their size on the Ti-BGs surface. Additionally, MTT and ALP results confirmed that the optimal amount of titanium substitution in BG was 5 mol.%. Since 5 mol.% Ti incorporated BG (BG-5) had the highest biocompatibility level, antibacterial properties, maximum cell proliferation, and ALP activity among the synthesized Ti-BGs, it is presented as the best candidate for further in vivo investigations.     

Synthesis of nanoporous Baghdadite by a modified sol-gel method and its structural and controlled release properties

In this research, a bimodal nanoporous Baghdadite (NB) (Ca3ZrSi2O9) was prepared by a modified sol-gel method using P123 as a surfactant. The effects of P123's contents on the structural and textural properties as well as the drug delivery behavior of NB were assessed in vitro. The usage of P123 offered a new route for the synthesis of NB. The synthesized NB samples with different amounts of P123 were studied through X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), N2 adsorption-desorption, field emission scanning electron microscopy (FESEM) equipped with energy-dispersive X-ray analysis spectroscopy (EDAX) and transmission electron microscopy (TEM). The results showed that a single-phase Baghdadite was obtained by this new method at the calcination temperature of 800?°C. It was found that an increase in P123's content up to 0.025?mol changed the morphology of NB samples from mountain-like to needle-like. The potential application of NB samples as drug delivery agents was assessed by estimating their release properties up to 240?h. This research revealed that the synthesized Baghdadite could be used as a potential nanoporous carrier with controlled release capability in bone tissue regeneration.     

Anti-D in a D-positive renal transplant patient

PURPOSE: We report a case of postoperative reparalysis in the recovery room, following nebulized epinephrine. The patient was pharmacologically reversed with edrophonium after paralysis with rocuronium. CLINICAL FINDINGS: A 12-yr-old girl developed postoperative reparalysis following the intraoperative administration of rocuronium. A total of 0.92 mg.kg-1 rocuronium was administered. After surgery, pharmacological reversal was achieved with 20 mg edrophonium with 0.15 mg atropine sulfate iv 35 min after the last administration of rocuronium. Muscular relaxation was monitored using an ulnar peripheral nerve stimulator (PNS). After reversal, a full train-of-four and sustained tetanus at 50 Hz were present. In the recovery room, following nebulized epinephrine, the patient became apneic. The patient was paralyzed and an ulnar PNS demonstrated only one faint twitch. The paralysis was reversed with 1.5 mg neostigmine with 0.3 mg glycopyrrolate. CONCLUSION: Postoperative reparalysis following rocuronium may be a cause of postoperative respiratory distress. The definitive diagnosis is made using PNS and observing the response to pharmacological reversal. Nebulized epinephrine may have a previously undescribed role in the development of postoperative reparalysis.     

Dynamic Analysis of Truss‐Beam System

As the manned exploration of space continues, many complex structural components are being developed to construct the orbital platforms that will be used to house communication hardware, personnel, and manufacturing complexes. These components are extremely flexible and complex in their behavior. There is a need for a simple method for determining the dynamic characteristics of these space structures with a minimum of effort. A mathematical model of one of these structural elements, an articulating truss beam, has been developed to predict its dynamic response. Assumptions of the force interaction between the beam elements and the joints have been made for using this model. Algorithms are provided to determine the flexibility matrix of the truss beam for use in the equation of motion. The natural frequencies obtained from using this method are compared with those obtained by the finite element method. An experimental procedure is planned to validate the results from the theoretical method.     

Estimates of intakes: methodology and results of some studies carried out in Italy.

The methods which may be applied to estimating population intakes of food additives are outlined. The applications in studies of the intakes of some preservatives and food colours in Italy are reported. It was concluded that there is a need to investigate comparability between the various methods used. The surveys carried out indicated that, in general, the levels of consumption of the additives studied did not present a health risk.     

Qualitative response of safety injection system for a large size break in the reactor coolant system cold leg

Safety injection system, accumulator injection system and residual heat removal system of CHASNUPP-1 were simulated using the computer code APROS. We observed the qualitative response of the simulated system during injection and re-circulation phases after LOCA. During rapid depressurization of SRC system due to leakage, these systems started coolant injection in the SRC system as per plant requirement. Different thermal-hydraulic parameters of the respective systems are presented and discussed. Results obtained are in good agreement with the reported document of the reference power plant.     

A new framework for sign language alphabet hand posture recognition using geometrical features through artificial neural network (part 1)

Neural Computing and Applications - Hand pose tracking is essential in sign languages. An automatic recognition of performed hand signs facilitates a number of applications, especially for people...     

Energy-efficient clustering in mobile ad-hoc networks using multi-objective particle swarm optimization

A mobile ad hoc network (MANET) is dynamic in nature and is composed of wirelessly connected nodes that perform hop-by-hop routing without the help of any fixed infrastructure. One of the important requirements of a MANET is the efficiency of energy, which increases the lifetime of the network. Several techniques have been proposed by researchers to achieve this goal and one of them is clustering in MANETs that can help in providing an energy-efficient solution. Clustering involves the selection of cluster-heads (CHs) for each cluster and fewer CHs result in greater energy efficiency as these nodes drain more power than noncluster-heads. In the literature, several techniques are available for clustering by using optimization and evolutionary techniques that provide a single solution at a time. In this paper, we propose a multi-objective solution by using multi-objective particle swarm optimization (MOPSO) algorithm to optimize the number of clusters in an ad hoc network as well as energy dissipation in nodes in order to provide an energy-efficient solution and reduce the network traffic. In the proposed solution, inter-cluster and intra-cluster traffic is managed by the cluster-heads. The proposed algorithm takes into consideration the degree of nodes, transmission power, and battery power consumption of the mobile nodes. The main advantage of this method is that it provides a set of solutions at a time. These solutions are achieved through optimal Pareto front. We compare the results of the proposed approach with two other well-known clustering techniques; WCA and CLPSO-based clustering by using different performance metrics. We perform extensive simulations to show that the proposed approach is an effective approach for clustering in mobile ad hoc networks environment and performs better than the other two approaches.     

Your comments matter: incorporating viewers’ comments for ranking online video content using bibliometrics

ABSTRACT

The quality of user-generated content over World Wide Web media is a matter of serious concern for both creators and users. To measure the quality of content, webometric techniques are commonly used. In recent times, bibliometric techniques have been introduced to good effect for evaluation of the quality of user-generated content, which were originally used for scholarly data. However, the application of bibliometric techniques to evaluate the quality of YouTube content is limited to h-index and g-index considering only views. This paper advocates for and demonstrates the adaptation of existing Bibliometric indices including h-index, g-index and M-index exploiting both views and comments and proposes three indices h_vc, g_vc and m_vc for YouTube video channel ranking. The empirical results prove that the proposed indices using views along with the comments outperform the existing approaches on a real-world dataset of YouTube.