Hydrogen storage performance of methyl-substituted mesoporous silica with tailored textural characteristics

Journal of Porous Materials - The present study reports a systematic analysis of morphology and hydrogen sorption capacity of mesoporous organic-inorganic silica prepared by varying the silica...     

Biosynthesis of silver nanoparticles in collagen gel improves their medical use in periodontitis treatment

Silver nanoparticles (AgNP) suspensions were biosynthesized by silver ions reduction in the presence of collagen, a nontoxic, organic polymer, intending to improve their medical use in periodontitis treatment. Spectrophotometric measurements showed a time- and concentration-dependent increase of AgNP formation in each suspension variant. Transmission electron microscopy revealed spherical morphology of AgNP in collagen and their mean diameter size was around 30?nm. The particle size distribution and zeta potential values of AgNP in collagen were determined by dynamic light scattering measurements. The surface charge of AgNP in collagen was positive, while commercial AgNP stabilized in citrate had negative surface charge. In vitro cytotoxicity testing of AgNP in collagen showed that they were biocompatible with human gingival fibroblasts in a wider range of concentrations than commercial nanoparticles. The antibacterial activity of AgNP in collagen against two pathogenic strains present in the periodontal pocket was dose-dependent and higher than that of AgNP in citrate. All these results demonstrated that AgNP prepared in collagen gel had improved properties, like small diameter, positive surface charge, high biocompatibility in human gingival fibroblasts, efficiency against bacterial growth and, thus, better therapeutic potential in periodontal disease treatment.     

Robocast zirconia-toughened alumina scaffolds: Processing,structural characterisation and interaction with human primary osteoblasts

Zirconia-toughened alumina (ZTA) is the gold-standard ceramic in hip arthroplasty, but still lacks direct osseointegration and a metal shell, often coated with a bioactive layer, is currently required. The latter could potentially be replaced by a thinner, architectured ZTA layer, thereby allowing for larger acetabular components, with larger range of motion and lower dislocation risk. Robocasting may be an adequate technique to fabricate the architectured layer. Therefore, as a first step, this study aimed to produce ZTA scaffolds (3D-ZTA) by robocasting and assess their in vitro response. Shape retention was achieved by using a stable, well-dispersed, high solid loading ink injected in acid pH waterbath. 3D-ZTA exhibit regularly spaced microporous, rough struts and fully interconnected macroporosity. Human primary osteoblasts were homogenously distributed inside 3D-ZTA and showed increased osteogenic marker expression compared to 2D-ZTA control. Further work will focus on optimizing scaffold design to improve cell retention and extracellular matrix maturation.     

Synthesis and characterization of a titanium phosphate-tellurite glass for Faraday rotators

This work is focused on investigation of thermal, structural, optical, magnetic, and magneto-optical properties of novel titanium phosphate-tellurite glass applied as Faraday rotators. The glass belonging to the system 35Li₂O–10Al₂O₃–5TiO₂–45P₂O₅–5TeO₂ was prepared by a nonconventional wet route of raw materials processing, followed by melting-quenching-annealing steps. Some important physical properties of the investigated glass have been measured and calculated, providing knowledge related to glass compactness, electronic structure, glass forming capability, etc. XRD analysis evidenced an amorphous network structure of the investigated glass. The optical absorption in the Vis domain is mainly due to Ti³⁺ ions and Te₂ clusters formed during the glass melting process. A relatively low optical absorption is noticed over 600 nm that activates a significant Faraday magneto-optical effect. Photoluminescence bands in the blue, red, and infrared domains are observed, caused by Te₂ clusters formed during the glass melting process. The magnetization in dependency on applied magnetic field reveals a complex behavior of the glass, depending on temperature. Thus, it is found a ferromagnetic behavior up to 2000 Oe, a paramagnetic component up to 40 000 Oe, followed by a diamagnetic one over 40 000 Oe. Faraday rotation angle and Verdet constant values in the visible domain are correlated with the reduced TeO₂ content of the glass.     

Assessment of chemical looping-based conceptual designs for high efficient hydrogen and power co-generation applied to gasification processes

Carbon capture and storage (CCS) technologies are expected to play a significant role in the coming decades for curbing the greenhouse gas emissions and to ensure a sustainable development of power generation and other energy-intensive industrial sectors. Chemical looping systems are very promising options for intrinsically capture CO₂ with lower cost and energy penalties. Gasification offers significant advantages compared with other technologies in term of lower energy and cost penalties for carbon capture, utilization of wide range of fuels, poly-generation capability, plant flexibility, lower environmental impact, etc.     

Self-doped N-propansulfonic acid polyaniline-polyethylene terephthalate film used as active sensor element for humidity or gas detection

In this work, we report the fabrication of sensors’ element for humidity or gases, prepared by in situ polymerization of aniline N-propansulfonic acid using ammonium persulfate in acidic medium. The polymer is being used in the form of powder or deposited in multiple layers onto the PET film. Various techniques including Fourier Transform infrared (FTIR), ultraviolet-–visible spectroscopy (UV–vis), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to characterize the as-prepared sensing materials. The film has been tested for humidity influence, where the significant variations in electrical characteristics were observed, suggesting its usefulness for humidity sensors. Also, for different organic and inorganic gases, a relatively low operating temperature and important sensitivity were observed that indicate its applicability as an active element for general gases sensors. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47743.     

Structure and heat capacity of the NaCeF4 compound

This work continued our general research program on obtaining metallic cerium by electrodeposition from NaCeF4 dis-solved in different molten fluorides. The structure of NaCeF4 (cubic or hexagonal depe...     

Phytochemical Characterization of Veronica officinalis L., V. teucrium L. and V. orchidea Crantz from Romania and Their Antioxidant and Antimicrobial Properties

Aerial parts of Veronica species are used in Romanian traditional medicine for the treatment of various conditions like kidney diseases, cough, and catarrh, and are known for their wound-healing properties. In the present study, the phenolic and sterolic content and the antioxidant and antimicrobial activities of three Veronica species (Plantaginaceae), V. officinalis L., V. teucrium L. and V. orchidea Crantz, were studied. The identification and quantification of several phenolic compounds and phytosterols were performed using LC/MS techniques and the main components were p-coumaric acid, ferulic acid, luteoline, hispidulin and β-sitosterol. More than that, hispidulin, eupatorin and eupatilin were detected for the first time in the Veronica genus. Nevertheless, representatives of the Veronica genus were never investigated in terms of their phytosterol content. The antioxidant potential investigated by Trolox equivelents antioxidant capacity (TEAC) and EPR spectroscopy revealed that V. officinalis and V. orchidea extracts presented similar antioxidant capacities, whilst the values registered for V. teucrium extract are lower. Regarding the antimicrobial activity of the investigated species, Staphylococcus aureus, Listeria monocytogenes and Listeria ivanovii were the most sensitive strains with MIC values between 3.9 and 15.62 mg/mL. The results obtained by this study may serve to promote better use of representatives from the genus Veronica as antioxidant and antimicrobial agents.     

Effect of hydrolyzed collagen on thermal,mechanical and biological properties of poly(lactic acid) bionanocomposites

Iranian Polymer Journal - Bionanocomposites based on poly(lactic acid) (PLA), plasticized with commercial tributyl o-acetyl citrate (ATBC) and containing hydrolyzed collagen (HC) up to...     

Metallo-functionalized first-generation salicylaldimine poly(propylenimine) tetraamine dendrimers: Electrochemical study and atomic force microscopy imaging

The adsorption and the redox processes of two first-generation salicylaldiamine dendritic ligands and their copper, cobalt and nickel metallo-functionalized complexes have been studied at two types of carbon electrode surface. Glassy carbon (GC) was used in an electrochemistry study and highly oriented pyrolitic graphite (HOPG) in ex situ atomic force microscopy (AFM) imaging. All salicylaldimine ligands and their metallo-functionalized complexes adsorb on the surface of the HOPG electrode, resulting in the formation of nanoclusters and films, which vary between 0.9 and 6 nm in size, depending on the metallo-functionalized salicylaldimine dendrimer chemical composition and solution concentration. Differential pulse voltammetry of the surface-confined films has shown that the anodic reactions observed correspond to the oxidation of the hydroxyl groups present in the ligand structure of all compounds. However, by following the changes in peak currents, potentials and width at half height it has been shown that destabilization of the ligand internal structure occurred in the metallo-functionalized complexes depending on the metal involved. The electrochemical behaviour of the surface-confined films observed in buffer solution was related to the morphology, obtained by AFM, of the immobilised first-generation salicylaldiamine dendritic ligands and corresponding salicylaldimine metallo-functionalized complexes.