Prospects of inedible plant oil-driven bio-lubricants for tribological characteristics – a review

ABSTRACT

Fossil fuel resource is on the draining stage which leads to an increment in the cost of the petroleum products. Nowadays, research is focused on the development of environmental friendly lubricants which are derivatives of renewable sources. Inedible plant oil-driven bio-lubricants are environmentally friendly because they are non-hazardous, biodegradable, as well as there is no emission of toxic gases. This study involves the characterisations, advantages, as well as utilisation of inedible plant oil-driven bio-lubricants as an alternative for tribological applications. This report presents the status about the global lubricant market as well as potential outlook. Inedible plant oil-driven bio-lubricants bear high viscosity, high lubricity, and high viscosity index which can enhance the equipment service life and has the ability to carry high load and results in minimum amount of metal traces during combustion.     

Heavy Water Additive in Formamidinium: A Novel Approach to Enhance Perovskite Solar Cell Efficiency

Heavy water or deuterium oxide (D₂O) comprises deuterium, a hydrogen isotope twice the mass of hydrogen. Contrary to the disadvantages of deuterated perovskites, such as shorter recombination lifetimes and lower/invariant efficiencies, the serendipitous effect of D₂O as a beneficial solvent additive for enhancing the power conversion efficiency (PCE) of triple-A cation (cesium (Cs)/methylammonium (MA)/formaminidium (FA)) perovskite solar cells from ≈19.2% (reference) to 20.8% (using 1 vol% D₂O) with higher stability is reported. Ultrafast optical spectroscopy confirms passivation of trap states, increased carrier recombination lifetimes, and enhanced charge carrier diffusion lengths in the deuterated samples. Fourier transform infrared spectroscopy and solid-state NMR spectroscopy validate the N–H₂ group as the preferential isotope exchange site. Furthermore, the NMR results reveal the induced alteration of the FA to MA ratio due to deuteration causes a widespread alteration to several dynamic processes that influence the photophysical properties. First-principles density functional theory calculations reveal a decrease in PbI₆ phonon frequencies in the deuterated perovskite lattice. This stabilizes the PbI₆ structures and weakens the electron–LO phonon (Fröhlich) coupling, yielding higher electron mobility. Importantly, these findings demonstrate that selective isotope exchange potentially opens new opportunities for tuning perovskite optoelectronic properties.     

Formation of acrylamide in microwave-roasted sorghum and associated dietary risk

The effect of microwave roasting parameters (300, 450 and 600 W; 5, 10 and 15 min) on acrylamide content in sorghum grain was determined using High Pressure Liquid Chromatography (HPLC)-photo diode array (PDA) detector coupled with C-18 column. Samples roasted at 300 and 450 W did not possess acrylamide, whereas 600 W (15 min) favoured formation of 2740.19 µg/kg of acrylamide, levels far exceeding the defined European Union (EU) limits. The chronic daily intake (CDI) for acrylamide through consumption of such grain flour was 3.25–9.5-fold higher to Joint FAO/WHO Expert Committee on Food Additives (JECFA) defined high exposure limits. The margin of exposure (MOE) values ranged from 4.3 to 12.76 and from 11.07 to 32.27 for neoplastic and neurological effects, respectively, demonstrating high exposure and serious health concerns associated with dietary intake of this toxicant. This study assesses the risk for the Indian population and highlights the importance of optimising process parameters for food product to minimise such exposure risks.     

Effect of hydrophilic and hydrophobic polymers on permeation of S-amlodipine besylate through intercalated polymeric transdermal matrix: 3(2) designing,optimization and characterization

Objective: Innovation in material science has made it possible to fabricate a pharmaceutical material of modifiable characteristics and utility, in delivering therapeutics at a sustained/controlled rate. The objective of this study is to design and optimize the controlled release transdermal films of S-Amlodipine besylate by intercalating hydrophilic and hydrophobic polymers.

Methods: 3(2) factorial design and response surface methodology was utilized to prepare formulations by intercalating the varied concentration of polymers(A) and penetration enhancer(B) in solvent. The effect of these independent factors on drug release and flux was investigated to substantiate the ex-vivo, stability and histological findings of the study.

Results: FTIR, DSC revealed the compatibility of drug with polymers; however, the semicrystallinity in drug was observed under PXRD. SEM micrographs showed homogeneous dispersion and entanglement of drug throughout the matrix. Results from the permeation study suggested the significant effect of factors on the ex vivo permeation of drug. It was observed that drug release was found to be increased with an increase in hydrophilic polymer concentration and PE. The formulations having polymers (EC:PVPK-30) at 7:3 showed maximum drug release with highest flux (102.60?±?1.12?µg/cm²/h) and permeability coefficient (32.78?±?1.38?cm/h). Significant effect of PE on lipid and protein framework of the skin was also observed which is responsible for increased permeation. The optimized formulation was found to be stable and showed no-sign of localized reactions, indicating safety and compatibility with the skin.

Conclusion: Thus, results indicated that the prepared intercalated transdermal matrix can be a promising nonoral carrier to deliver effective amounts of drug.     

Benchmarking large-scale data management for Internet of Things

The Journal of Supercomputing - In the current era of the Internet of Things (IoT), massive number of sensors are used in our daily lives. Sensors are everywhere around us. They exist in our homes,...     

A Holographic Technique Featuring Broad Range Sensitivity to Contour Diffuse Objects

Abstract

We have shown that the performances available from a two-source relief sensing interferometer are improved substantially by combining an innovative way of managing the phase resources inherent in the interferometer. The approach gives rise to the emergence of a flexible and versatile holographic contouring method capable of addressing surfaces of broadly varying depths. Experimental results are presented to support the proposal.     

KAGO: an approximate adaptive grid-based outlier detection approach using kernel density estimate

Pattern Analysis and Applications - Outlier detection approaches show their efficacy while extracting unforeseen knowledge in domains such as intrusion detection, e-commerce, and fraudulent...     

Catalytic effect of bis (cyclopentadienyl) nickel II on the improvement of the hydrogenation-dehydrogenation of Mg-MgH2 system

Bis(cyclopentadienyl) nickel II is one of the best precursors of nickel catalyst which remarkably improved the hydrogen absorption-desorption of Mg–MgH₂ system. The X-ray photoelectron spectroscopy (XPS) and Furrier Transformed Infrared Spectroscopy (FTIR) analyses revealed that bis (cyclopentadienyl) nickel II decomposed into metallic nickel during ball milling with MgH₂. The nickel thus formed has homogeneously doped over the Mg - MgH₂ surface. The Ni-doped Mg-MgH₂ have shown the excellent catalytic effect on hydrogen absorption-desorption. The catalyzed MgH₂ could desorb hydrogen below 225 °C (T_onset) under Ar flow, and absorb hydrogen at 50 °C under 1.5 MPa H₂ pressure. The hydrogen absorption-desorption temperatures are remarkably decreased as compared to the uncatalyzed Mg-MgH₂ system under the identical experimental conditions.