Photochemical Reactions in Supramolecular Assemblies of Gels: Dimerizations and Polymerizations via Pericyclic Reactions

Gel state reactions offer new direction for the reactivity of the organic molecules or metal‐organic materials upon photoirradiation with shorter reaction times and high yields compared to solid and solution states. The restricted molecular movement among the molecules in the soft solids control the stereoselectivity of the photoproducts in the gel state reactions. To date, most of the strategies based on self‐assembly have been demonstrated in the solid state, in particular for [2+2] reactions of olefins and polymerization reactions of diacetylenes via 1,4 addition. The soft materials are of emerging materials in recent days given their many applicative day‐to‐day aspects. This review gives a glimpse of recent reports on pericyclic reactions in the gel state that are designed based on the self‐assembly concept. Also it highlights how such reactions accompany the physical changes in the structure of the gels and stereo controlled products with high yields.     

Inorganic-Based Printed Thermoelectric Materials and Devices

One of the simplest ways to generate electric power from waste heat is thermoelectric (TE) energy conversion. So far, most of the research on thermoelectrics has focused on inorganic bulk TE materials and their device applications. However, high production costs per power output and limited shape conformity hinder applications of state-of-the-art thermoelectric devices (TEDs). In recent years, printed thermoelectrics has emerged as an exciting pathway for their potential in the production of low-cost shape-conformable TEDs. Although several inorganic bulk TE materials with high performance are successfully developed, achieving high performance in inorganic-based printed TE materials is still a challenge. Nevertheless, significant progress has been made in printed thermoelectrics in recent years. In this review article, it is started with an introduction signifying the importance of printed thermoelectrics followed by a discussion of theoretical concepts of thermoelectricity, from fundamental transport phenomena to device efficiency. Afterward, the general process of inorganic TE ink formulation is summarized, and the current development of the inorganic and hybrid inks with the mention of their TE properties and their influencing factors is elaborated. In the end, TEDs with different architecture and geometries are highlighted by documenting their performance and fabrication techniques.     

A novel scheme to detect the best cloud service provider using logarithmic operational law in generalized spherical fuzzy environment

Knowledge and Information Systems - Generalized spherical fuzzy number (GSFN) is an extension of spherical fuzzy number (SFN) which deals the uncertainties involved in the real-life problems in...     

Simplification of English and Bengali Sentences for Improving Quality of Machine Translation

Neural Processing Letters - Training translation systems with complex and compound sentences are generally considered computationally tough and such systems fail to process, the large syntactical...     

Fuzzy triangulation signature for detection of change in human emotion from face video image sequence

The present article proposes a geometry-based fuzzy relational technique for capturing gradual change in human emotion over time available from relevant face image sequences. As associated features, we make use of fuzzy membership arising out of five triangle signatures such as - (i) Fuzzy Isosceles Triangle Signature (FIS), (ii) Fuzzy Right Triangle Signature (FRS), (iii) Fuzzy Right Isosceles Triangle Signature (FIRS), (iv) Fuzzy Equilateral Triangle Signature (FES), and (v) Other Fuzzy Triangles Signature (OFS) to achieve the task of appropriate classification of facial transition from neutrality to one among the six expressions viz. anger (AN), disgust (DI), fear (FE), happiness (HA), sadness (SA) and surprise (SU). The effectiveness of the Multilayer Perceptron (MLP) classifier is tested and validated through 10 fold cross-validation method on three benchmark image sequence datasets namely Extended Cohn-Kanade (CK+), M&M Initiative (MMI), and Multimedia Understanding Group (MUG). Experimental outcomes are found to have achieved accuracy to the tune of 98.47%, 93.56%, and 99.25% on CK+, MMI, and MUG respectively vindicating the effectiveness by exhibiting the superiority of our proposed technique in comparison to other state-of-the-art methods in this regard.

     

Tunable Crystallinity in Regioregular Poly(3‐Hexylthiophene) Thin Films and Its Impact on Field Effect Mobility

The properties of poly(alkylthiophenes) in solution are found to have a profound impact on the self assembly process and thus the microstructural and electrical properties of the resultant thin films. Ordered supramolecular precursors can be formed in regioregular poly(3‐hexylthiophene) (P3HT) solutions through the application of low intensity ultrasound. These precursors survive the casting process, resulting in a dramatic increase in the degree of crystallinity of the thin films obtained by spin coating. The crystallinity of the films is tunable, with a continuous evolution of mesoscale structures observed as a function of ultrasonic irradiation time. The photophysical properties of P3HT in solution as well in the solid state suggest that the application of ultrasound leads to a π stacking induced molecular aggregation resulting in field effect mobilities as high as 0.03 cm² V^?1 s^?1. A multiphase morphology, comprising short quasi‐ordered and larger, ordered nanofibrils embedded in a disordered amorphous phase is formed as a result of irradiation for at least 1 min. Two distinct regions of charge transport are identified, characterized by an initial sharp increase in the field effect mobility by two orders of magnitude due to an increase in crystallinity up to the percolation limit, followed by a gradual saturation where the mobility becomes independent of the thin film microstructure.     

Electrical contact properties between the accumulation layer and metal electrodes in ultrathin poly(3-hexylthiophene)(P3HT) field effect transistors

Probing contact properties between an ultrathin conjugated polymer film and metal electrodes in field effect transistors (FETs) is crucial not only to understanding charge transport properties in the accumulation layer but also in building organic sensors with high sensitivity. We investigated the contact properties between gold electrodes and poly(3-hexylthiophene) (P3HT) as a function of film thickness using gated four-point sheet resistance measurements. In an FET with a 2 nm thick P3HT film, a large voltage drop of 1.9 V (V(D) = -3 V) corresponding to a contact resistance of 2.3 × 10(8) Ω was observed. An effective FET mobility of 1.4 × 10(-3) cm(2)/(V s) was calculated when the voltage drop at the contacts was factored out, which is approximately a factor of 3 greater than the two-contact FET mobility of 5.5 × 10(-4) cm(2)/(V s). A sharp decrease in the ratio of the contact resistance to the channel resistance was observed with increasing film thickness up to a thickness of approximately 6 nm, separating a contact limited regime from a charge transport limited regime. The origin of the large contact resistance observed in the device prepared with an ultrathin P3HT film is discussed in light of results from X-ray diffraction (XRD) and atomic force microscopy (AFM) studies.     

Comparative analysis of storage modules under different dispatch strategies for an optimum decentralized hybrid energy solution: a case study of a remote Indian village

India has a large poor population in spite of having a steady economic growth. Supply of centralized grid power to remote villages of India is not feasible due to adverse topography and poor economic condition of the villagers. To supply the reliable power at a minimum cost including penalty due to carbon dioxide emission, a suitable decentralized energy combination using locally available resources may be a better sustainable solution. The economy of such a hybrid energy supply system significantly depends on storage devices and dispatch strategies. Therefore, selection of appropriate storage devices and dispatch strategy need to be optimized based on available local resources. In this study, the comparative analysis of techno-economic factors for five different storage devices (lead acid battery, lithium-ion battery, vanadium redox battery, zinc bromide battery and pumped hydro energy storage) are studied under two different dispatch strategies, i.e., Load Following and Cycle Charging. The estimated cost of energy and net present cost of the recommended optimum combined energy system are in the range of US$0.197/kWh–US$0.453/kWh and US$3,62,384–US$5,76,369, respectively. The cost of energy, net present cost and carbon dioxide emission for the selected energy generators combination with the zinc bromide battery is 48.964–56.512%, 24.149–32.147% and 43.419–55.865% lower than other storage-based energy systems, respectively. The abovementioned economic and environmental factors are lower by 34.113, 10.489 and 31.094%, respectively, under Load Following dispatch strategy with respect to the Cycle Charging dispatch strategy for the optimum energy combination with zinc bromide battery.

Graphical abstract

     

Effects of Silicon on Growth,Yield and Fruit Quality of Cantaloupe under Drought Stress

Silicon - Silicon (Si) plays an important role in mitigating adverse effects of various biotic and abiotic stresses including drought. Polyhouse experiment was conducted to evaluate the effects of...     

Design and Performance Study of Dynamic Fractors in Any of the Four Quadrants

A fractor is a simple fractional-order system. Its transfer function is \(1/Fs^{\alpha }\); the coefficient, F, is called the fractance, and \(\alpha \) is called the exponent of the fractor. This paper presents how a fractor can be realized, using RC ladder circuit, meeting the predefined specifications on both F and \(\alpha \). Besides, commonly reported fractors have \(\alpha \) between 0 and 1. So, their constant phase angles (CPA) are always restricted between \(0^{\circ }\) and \(-90^{\circ }\). This work has employed GIC topology to realize fractors from any of the four quadrants, which means fractors with \(\alpha \) between \(-\)2 and +2. Hence, one can achieve any desired CPA between \(+180^{\circ }\) and \(-180^{\circ }\). The paper also exhibits how these GIC parameters can be used to tune the fractance of emulated fractors in real time, thus realizing dynamic fractors. In this work, a number of fractors are developed as per proposed technique, their impedance characteristics are studied, and fractance values are tuned experimentally.