Experimentelle Untersuchung des Abwälzverhaltens von Beveloidverzahnungen mit lokal angepassten Verzahnungsdaten entlang der Zahnbreite

Forschung im Ingenieurwesen - Zur Übertragung von Drehmoment und Drehzahl in beliebiger Achsanordnung eignen sich bei kleinem Achswinkel bis 30° Beveloidverzahnungen. Besonders...     

Evaluation of Transport Phenomena for Removing Vanadium from Petrochemical Industry Solid Waste

Transport phenomena are investigated which are involved in the electrokinetic remediation process used for removing vanadium from deactivated catalysts from oil catalytic cracking that are currently allotted to cement plants and class-I landfills. Variables such as the concentration of electrolyte, electric potential, and applied electric current were evaluated in order to determine the effects produced by electroosmosis, diffusion, hydraulic gradient, and electromigration on the removal of vanadium from the catalyst. It was observed that migration is the most relevant phenomenon in the remediation tests, and for the best remediation condition, the migratory flow accounted for about 87 % of the vanadium removal.     

Methyltransferase Contingencies in the Pathway of Everninomicin D Antibiotics and Analogues

Everninomicins are orthoester oligosaccharide antibiotics with potent activity against multidrug-resistant bacterial pathogens. Everninomicins act by disrupting ribosomal assembly in a distinct region in comparison to clinically prescribed drugs. We employed microporous intergeneric conjugation with Escherichia coli to manipulate Micromonospora for targeted gene-replacement studies of multiple putative methyltransferases across the octasaccharide scaffold of everninomicin effecting the A₁, C, F, and H rings. Analyses of gene-replacement and genetic complementation mutants established the mutability of the everninomicin scaffold through the generation of 12 previously unreported analogues and, together with previous results, permitted assignment of the ten methyltransferases required for everninomicin biosynthesis. The in vitro activity of A₁- and H-ring-modifying methyltransferases demonstrated the ability to catalyze late-stage modification of the scaffold on an A₁-ring phenol and H-ring C-4’ hydroxy moiety. Together these results establish the potential of the everninomicin scaffold for modification through mutagenesis and in vitro modification of advanced biosynthetic intermediates.     

Improved Second Generation Iron Pincer Complexes for Effective Ester Hydrogenation

Hydrogenation of esters to alcohols with a well‐defined iron ^iPr2PNP pincer complex has been recently reported by us and other groups. We now introduce a novel and sterically less hindered ^Et2PNP congener that provides superior catalytic activity in the hydrogenation of various carboxylic acid esters and lactones compared to the known complex. Successful hydrogenation proceeds under relatively mild conditions (60 °C) with lower catalyst loadings.

     

Performance characteristics of the anaerobic baffled reactor

An anaerobic sludge blanket process, termed the anaerobic baffled reactor (ABR), has been developed and shows promise for industrial wastewater treatment. It combines the advantages of high stability and reliability with a high void volume. The risk of clogging and sludge bed expansion with resulting high microbial losses is reduced and there is no need for special gas collection or biological solids separation systems. Organic loadings as high as 36 g COD l^?1day^?1 have been achieved with COD removal rates of more than 24 g COD l^?1 day^?1 and methane production rates exceeding 6 volumes per day per unit volume of reactor. The hypothesis, that the ABR may be adequately modeled as a fixed-film reactor, has been supported. Therefore, a unified approach, based on fundamentals of bacterial kinetics and mass transport, appears useful for modeling this and similar systems. Pilot plant studies are necessary to determine the scaling factors of the system as well as the overall efficiency and costs.     

Efficient and accurate measurement of very sharp crystallographic textures: A new measurement strategy

A new measurement strategy is introduced to determine very pronounced crystallographic textures of polycrystalline materials most accurately and efficiently. It features optimized adaptively refined successive X-ray pole figure measurements. To optimize both the total experimental time as well as the angular resolution, and thus the accuracy of pole figure measurements, traveling salesman problems on the hemisphere of poles have to be resolved. The corresponding algorithm is encoded and implemented as part of the software controlling the texture goniometer. The procedure was applied to pole figure measurements of a NiW alloy with extremely sharp Cube texture. The results are presented and compared to conventional measurement strategies.     

Evaluation of the wettability of mortar component granular materials through contact angle measurements

The wettability of granular materials has a direct effect on the workability of pastes, mortars and concretes containing such materials. Given this, the wetting behaviour of two Portland cements, two mineral admixtures (limestone filler and silica fume) and different sand types (siliceous, limestone and granite) was evaluated through the measurement of the contact angle between these materials and water. The results show that all the materials possess high wettability. A chemical agent, dichlorodimethylsilane, was used to modify the surface properties of a 0–1 mm siliceous sand, making it more hydrophobic and, therefore, unable to be spontaneously wetted by water. The properties of a mortar produced with the silane-treated sand were evaluated, showing improvements on workability as a result of the chemical treatment.     

ITER vacuum vessel: Design review and start of procurement process

The ITER vacuum vessel (VV) is one of the most critical components in the ITER project. It is on the critical path in the construction schedule and it is also a safety important class component (SIC), providing the first confinement barrier.As a result of reviews and the latest physics analyses, design requirements have been updated (e.g. ELM/VS coils) and a few design changes have to be implemented. This paper covers the updates of the VV vertical and horizontal EM load conditions during asymmetric VDEs, the design analysis of the ELM/VS coils and their interfaces to the VV, the blanket manifold design and the preparation of the technical specification in preparation for the procurement arrangement to be signed.