β-phase transformation and thermoelectric power in FeSi2 and Fe2Si5 based alloys containing small amounts of Cu

The effects of Cu addition on the β phase formation rate and the thermoelectric power in various FeSi₂ and Fe₂Si₅ based alloys was examined. The peritectoid reaction (a+→β) in FeSi₂ alloys was initially enhanced by the addition of Cu but it became slower for longer annealing times. The retained metallic ε was harmful for the thermoelectric power. The inherent thermoelectric properties of (FeSi₂)_99−XMn₁Cu_X (X=0–1.O at.%), (FeSi₂)_99−X Co₁Cu_X (X=0–1.0 at.%) alloys were attained after the elimination of ε. In the case of eutectoid reaction (→β+Si). Differential thermal analysis, X-ray diffraction and microscopic observation clearly confirmed that the eutectoid reaction rate was drastically enhanced by the addition of a small amount of Cu and its rate decreased with decreasing Cu content. The rate also depends on the annealing temperature and reached a maximum at about 1073 K for most alloys. The addition of only 0.1 at.% Cu was still very effective even in Mn or Co doped alloys. The thermoelectric power of these alloys increased very quickly with annealing time. Their final values decreased with Cu content and saturated at 0.2 at.% Cu. The value of the 0.1 at.% Cu added alloy was higher than that of both the conventional p- and a-type FeSi₂ based alloys. These results suggest that the Fe₂Si₅ alloys with a small amount of Cu may be attractive as new thermoelectric materials.     

铝合金铸件充型过程及氧化膜卷入的数值模拟

对于直接有限差分法，提出了单元表面无量纲距离、表面充填比率和体积充填比率，以描述铸件充型过程中自由表面的形状，建立了相应的充型过程数学模型，考虑了自由表面形状对动量、质量和能量传输的影响；提出了充型过程自由表面碰撞中表面氧化膜破碎，及其后破碎氧化膜流动的计算模型。对实验铝合金铸件进行了模拟应用，通过实际铸件充型过程的特殊X射线实时观察和记录。及实际铸件的气孔、收缩缺陷分布的检测，对模拟结果进行了验证分析。结果表明：充型过程模拟结果与X射线实时观察结果吻合较好，尤其是自由表面的变化；氧化膜卷入模拟结果与实际铸件气孔、收缩缺陷的分布存在一定的对应关系。     

Environmentally Friendly Determination of Quality Parameters of Biodiesel/Diesel Blends Using Fourier Transform Infrared Spectra

Multivariate calibration models based on data from mid‐infrared spectroscopy of biodiesel/diesel blends were obtained. The blends were prepared from diesel oil and esters of soybean oil, waste cooking oil, and hydrogenated vegetable oil in proportions ranging from 0 to 100 % biodiesel. The results showed that the multivariate regression models with interval partial least squares (iPLS), backward interval partial least squares (biPLS), and synergy interval partial least squares (siPLS) were able to determine the fractions of the infrared spectrum that contain the relevant information for estimating the values of physicochemical properties, flash point, specific gravity, and cetane number, which are used in quality control of the blends. In the best models, the values of determination coefficients were greater than 0.9500, proving their efficiency as an alternative to traditional analytical methods.     

Combined surgery for coronary artery disease and thoracic aortic disease

Combined surgery in 6 cases who had coronary artery disease and thoracic aortic disease simultaneously was analyzed. Case # 1 had ascending aortic replacement under deep hypothermic circulatory arrest because of iatrogenic aortic dissection caused by aortic clamp during the routine coronary artery bypass grafting (CABG). Case # 2 had DeBakey type II chronic dissection. Case # 3 had type I aortic dissection 4 years after the initial CABG. Both case # 2 and # 3 had ascending aortic replacement under retrograde cerebral perfusion along with CABG. Transverse aortic replacement was performed in case # 4, # 5 and # 6 under selective cerebral perfusion along with CABG. Case # 4 was associated with ascending-transverse aortic aneurysm. Case # 5 had aortitis syndrome complicated with severe coronary ostial stenosis and cervical branch stenosis. Case # 6 also had aortitis syndrome, severe coronary ostial stenosis, heavily calcified ascending-transverse aorta, and mitral and aortic regurgitation. This case had mitral and aortic valve replacement additionally. Case # 2 died of low cardiac output syndrome and multi-organ failure postoperatively. Case # 4 did not recover from profound shock that followed the preoperative acute myocardial infarction. The problems of low cardiac output syndrome caused by long interval of ischemic cardiac arrest, and also the problems of proximal anastomotic site of saphenous vein grafts were discussed.     

A case of ventricular septal perforation treated surgically with an infarction exclusion technique

We report an 85-year-old woman with postinfarction interventricular septal perforation. She underwent successful emergent surgical treatment by a slightly modified method based on David-Komeda's procedure. Perforation in this case occurred four days after acute myocardial infarction. Preoperative Qp/Qs was 2.58, and pulmonary artery pressure was 34/25 mmHg. The area of infarction was large, and the perforation was the linear type 2.5 cm long near the apex. A probe was not able to pass through the perforation due to its complicated configuration. A double Xenomedica patch was sutured on the left side of the interventricular septum without excising the infarcted area. The suture line was placed on healthy myocardium apart from the infarcted area. The Xenomedica patch was sandwiched between the closure line of the ventriculotomy. Four days after surgery, residual shunt was observed by echocardiogram, but this subsequently disappeared on the 17th postoperative day. The patient was discharged from our hospital on the 57th postoperative day, and is now doing quite well.     

Two-dimensional automata with rotated inputs (projection-type)

This paper introduces a new type of automaton on a two-dimensional tape, which decides acceptance or rejection of an input tape x by first scanning the tape x from various sides with parallel/sequential array readers, and by then scanning the pair of the halting state configurations (i.e., projections) generated by these array readers with a multitape finite automaton. We mainly concentrate on investigating the accepting power of two-dimensional automata which consist of one-way parallel/sequential array readers and a multitape finite automaton operating in real time.     

铝合金铸件氧化膜卷入的数值模拟

在直接有限差分法DFDM(Direct Finite Difference Method)进行铸件充型过程模拟的基础上,提出了充型过程自由表面碰撞中表面氧化膜破碎,及其后破碎氧化膜流动的计算模型.对试验铝合金铸件进行了模拟应用,使用特殊X射线装置对该铸件实际充型过程及自由表面进行了实时观察验证,通过实际铸件的气孔、收缩缺陷分布的检测,对氧化膜卷入模拟结果进行了定性验证分析.     

Bactericidal effects of konjac fluid on several food-poisoning bacteria

In this study, the bactericidal effects of Japanese alkaline foods on food-poisoning bacteria were evaluated. Konjac is an alkaline food soaked in calcinated calcium (the pH of konjac fluid ranges from 11.42 to 12.53). Konjac fluids completely inactivated Escherichia coli, enterohemorrhagic E. coli O157:H7 and E. coil O26:H9, Salmonella Enteritidis, Vibrio parahemolyticus. and Staphylococcus aureus. The initial level of 6 log CFU/ml dramatically decreased after incubation with konjac fluid, and no viable gram-negative bacterium cells could be detected within 1 to 2 days and no viable S. aureus cells could be detected within 3 to 5 days. On the other hand, treatment with konjac fluid was also effective in reducing levels of spore-forming bacteria (Bacillus subtilis, Bacillus cereus, Clostridium perfringens, and Clostridium botulinum type E and type A). At least a 4-log reduction of spore-forming bacteria was obtained in konjac fluid within 7 to 14 days. Vegetative cells were more susceptible to konjac fluid than spores were. When the initial cell count was 6 log CFU/ml, a few surviving spores remained for 60 to 90 days, but no spores could be detected after 120 days. When the initial count of spore-forming bacteria was 3 to 4 log CFU/ml, the cells considered vegetative were completely inactivated within I to 3 days. Repeated treatment with konjac fluid caused complete inactivation of spores in less than 1 to 3 days. Our studies indicate that konjac fluid, which has a long history of use in food, will control food-poisoning bacterial contamination during the production or preservation of konjac and other foods and has a preventive effect on bacteria that can cause severe disease at uniquely low levels.