Aqueous‐Phase Reforming in a Microreactor: The Role of Surface Bubbles

In heterogeneous catalysis, the creation of gaseous products as bubbles in a liquid phase on the catalytic surface is associated with slip phenomena. In a microreactor, the slip length at the gas‐liquid interface is in the same order of magnitude as the reactor dimensions, which can affect fluid dynamics and transport phenomena. Here, the interplay of momentum, heat and mass transfer in a microreactor, when bubbles form on the catalytic surface, was investigated using two‐dimensional simulations. The effect of bubbles on the endothermic process of aqueous‐phase reforming of a glycerol solution was evaluated in terms of conversion and conversion and temperature in the reactor. Altogether, this study highlights the impact of bubbles, not only on the transport phenomena but also on the reactor performance.     

Monolithically-integrated BiVO4/p+-n GaAs1-xPx tandem photoanodes capable of unassisted solar water splitting

Monolithically-integrated tandem photoanodes were fabricated on substrates consisting of epitaxial n-GaAs_1-xP_x (x ? 0.32) grown on n⁺-GaAs wafers. A p⁺-n junction photovoltaic (PV) cell was first formed by zinc diffusion into the n-GaAs_0.68P_0.32 from a deposited ZnO coating. After diffusion the ZnO serves as a transparent electrical contact to the resulting p⁺-GaAs_0.68P_0.32 surface layer. Transparent, conducting SnO₂:F provides chemical and mechanical protection for the ZnO and the underlying PV cell, and it electrically connects this cell to a top BiVO₄ photocatalyst layer. In some photoanodes, a WO₃ thin film was interposed between the SnO₂:F and BiVO₄. All oxide coatings were produced by ultrasonic spray pyrolysis except WO₃, which was spin coated. Unassisted (unbiased) solar water splitting was achieved, with a solar-to-hydrogen efficiency approaching 2%, without addition of any co-catalyst to the BiVO₄ surface. This work can provide insights to other researchers regarding scalable, low cost approaches for the planar monolithic integration of oxide photoanode materials with PV cells to create new tandem devices.     

Long Non-Coding RNAs as Master Regulators in Cardiovascular Diseases

Cardiovascular disease is the leading cause of death in the United States, accounting for nearly one in every seven deaths. Over the last decade, various targeted therapeutics have been introduced, but there has been no corresponding improvement in patient survival. Since the mortality rate of cardiovascular disease has not been significantly decreased, efforts have been made to understand the link between heart disease and novel therapeutic targets such as non-coding RNAs. Among multiple non-coding RNAs, long non-coding RNA (lncRNA) has emerged as a novel therapeutic in cardiovascular medicine. LncRNAs are endogenous RNAs that contain over 200 nucleotides and regulate gene expression. Recent studies suggest critical roles of lncRNAs in modulating the initiation and progression of cardiovascular diseases. For example, aberrant lncRNA expression has been associated with the pathogenesis of ischemic heart failure. In this article, we present a synopsis of recent discoveries that link the roles and molecular interactions of lncRNAs to cardiovascular diseases. Moreover, we describe the prevalence of circulating lncRNAs and assess their potential utilities as biomarkers for diagnosis and prognosis of heart disease.     

Identification and management of acid generating mine wastes-procedures and practices in south-east Asia and the Pacific regions

Development of mineral resources in the Asian/Pacific region are a particular concern due to the generation of solid waste and disposal of this waste in a wet and humid environment. This paper addresses the major geochemical issues associated with mine waste disposal under these conditions with particular emphasis on acid mine drainage and acid generating waste materials. A strategy is presented for classifying the acid forming potential of mine waste based on the acid-base account and the net acid generation (NAG) confirmation test. The need for a correct and adequate sampling strategy is highlighted since sample selection is a crucial step in the identification of acid generating waste.     

Learning from the extreme River Tyne flood in January 2005

Extreme floods often demonstrate unanticipated characteristics that pose problems for management and response. The floods on the Tyne and Eden in January 2005 provided numerous examples of such unexpected response. This paper describes characteristics of storm rainfall and runoff generation on the River Tyne catchment, flood effects and damage. Unusual aspects of hydrological behaviour are highlighted as a basis for assessing what lessons can be learned for flood risk management. These include problems associated with coincidence of extreme wind speeds and rainfall, the retarding influence of floodplain storage on flood wave travel time in extreme flows, the influence of critical storm duration on the severity of the resulting flood on headwaters and main river, and the variety of mechanisms of flood occurrence. The occurrence of such an extreme flood provides the opportunity to validate and enhance the review process of the Environment Agency's flood zone maps.     

Loss and formation of malodorous volatile sulfhydryl compounds during wine storage

Volatile sulfur compounds (VSCs), particularly low molecular weight sulfhydryls like hydrogen sulfide (H₂S) and methanethiol (MeSH), are often observed in wines with sulfurous off-aromas. Recent work has shown both H₂S and MeSH can increase up to a few µM (> 40 µg/L) during anoxic storage, but the identity of the latent sources of these sulfhydryls is still disputed. This review critically evaluates the latent precursors and pathways likely to be responsible for the loss and formation of these sulfhydryls during wine storage based on the existing enology literature as well as studies from food chemistry, geochemistry, biochemistry, and synthetic chemistry. We propose that three precursor classes have sufficient concentration and metastability to serve as latent sulfhydryl precursors in wine: 1) transition metal-sulfhydryl complexes, particularly those formed following Cu(II) addition, which are released under anoxic conditions through an unknown mechanism; 2) asymmetric disulfides, polysulfanes, and (di)organopolysulfanes formed through transition-metal mediated oxidation (e.g., Cu(II)) of sulfhydryls or pesticide degradation, and released through sulfitolysis, metal-catalyzed thiol-disulfide exchange or related reactions; 3) S-alkylthioacetates, primarily formed during fermentation, and releasable hydrolytically. Some evidence also exists for S-amino acids serving as precursors. Based on these findings, we propose a “decision tree” approach to choosing appropriate strategies for managing wines with sulfurous off-aromas.     

A naturalistic study of commuter cyclists in the greater Stockholm area

Few naturalistic studies have been carried out with commuter cyclists to discover the types of problems they encounter on a daily basis. The study presented here has been commissioned by the City of Stockholm municipality and focuses specifically on commuter cyclists in the Greater Stockholm area. The aim of the study was to describe and pinpoint accessibility and safety problems, but also to generate an accessible geographical interface that could serve as a traffic planning tool for cycle network improvement. Statistical surveys in the Stockholm area have shown a rapid growth in the number of cyclists as well as an increase in problems associated with an overburdened cycle infrastructure. Given the heightened emphasis on transport system sustainability, the City of Stockholm is faced with the challenging task of trying to maintain and encourage the upward trend in commuter cycling through a process that involves problem identification, classification, prioritisation and resolution. An innovative methodology involving the use of GPS logging devices and small video cameras was developed and supported with analysis software designed specifically for the purposes of this study. Experienced commuter cyclists were recruited to cycle 17 different major cycle routes to and from the suburbs and inner city area during morning and afternoon peak traffic hours during the main cycle season. Over 500 safety and accessibility/mobility problems were identified and recorded from the data collected from 16 commuter cyclists. The method and representation of data proved successful for strategic traffic planning work at City of Stockholm and has since provided invaluable input for and the development of a new cycle plan for Greater Stockholm. Indirectly, the results of this work have also contributed to longer term safety and environmental targets.     

Thromboelastography in healthy dairy cows

Thromboelastography is a whole blood-based coagulation assay that can be used to investigate hypocoagulability and hypercoagulability, as seen with thromboembolic diseases and disseminated intravascular coagulation. Numerous coagulopathies due to different causes are reported in cows. The objective was to establish reference intervals for thromboelastography using the TEG 5000 (Haemonetics GmbH, Munich, Germany) with citrated whole blood samples and kaolin activation in dairy cows and to investigate possible thromboelastographic changes between cows in different lactation periods. An additional objective was to test the stability of samples for up to 100 h. Sixty blood samples from healthy Holstein-Friesian cows were examined. The samples were allocated to 3 different lactation groups (≤30 d postcalving, 31–99 d postcalving, ≥100 d postcalving). Thromboelastography was performed by using the TEG 5000 analyzer with citrated whole blood samples with kaolin activation. The calculated reference intervals were as follows: reaction time = 2.2 to 6.2 min, coagulation time = 0.8 to 2.0 min, angle α = 58.2 to 81.8°, maximum amplitude = 64.3 to 89.2 mm, and clot rigidity = 9.2 to 41.2 dyn/cm². The 3 different lactation groups showed no significant differences in TEG parameters. No significant difference was seen in samples stored for up to 48 h at room temperature, which indicates that delays in processing samples, such as those arising during transit, are not an issue.     

Examination of radio‐opacity enhancing additives in shape memory polyurethane foams

Three microparticle additives, tungsten (W), zirconium oxide (ZrO₂) , and barium sulfate (BaSO₄) were selected to enhance the radio‐opacity in shape memory polymer (SMP) foam biomaterials. The addition of filler causes no significant alterations of glass transition temperatures, density of the materials increases, pore diameter decreases, and total volume recovery decreases from approximately 70 times in unfilled foams to 20 times (4% W and 10% ZrO₂). The addition of W increases time to recovery; ZrO₂ causes little variation in time to shape recovery; BaSO₄ increases the time to recovery. On a 2.00 mean X‐ray density (mean X.D.) scale, a GDC coil standard has a mean X.D. of 0.62 ; 4% W enhances the mean X.D. to 1.89, 10% ZrO₂ to 1.39 and 4% BaSO₄ to 0.74. Radio‐opacity enhancing additives could be used to produce SMP foams with controlled shape memory kinetics, low density , and enhanced X ‐ray opacity for medical materials. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42054.