Short communication: Effect of pH on the heat stability of reconstituted reduced calcium milk protein concentrate dispersions

This study aimed to investigate the heat stability of dispersions from reconstituted reduced-calcium milk protein concentrate (RCMPC) with 80% protein or more. The tested RCMPC powders were produced from skim milk subjected to CO₂ treatment before and during the process of ultrafiltration. The CO₂ injection was controlled to obtain 0 (control, no CO₂ injection), 20, 30, and 40% reduction in calcium levels in the RCMPC powders. The RCMPC powders were reconstituted to 10% (wt/wt) protein in deionized water. These dispersions were tested for heat stability in a rocking oil bath at 140°C at unadjusted, 6.5, 6.7, 6.9, and 7.1 pH. Calcium ion activity (CIA) and ionic strength measurements were carried out using a Ca ion-selective electrode and conductivity meter. Unadjusted pH of the dispersions varied from 6.8 in control to 5.96 in 40% RCMPC dispersions. The CIA of unadjusted dispersions ranged from 1.31 mM in control to 2.83 mM in 40% RCMPC. Heat stability, expressed as heat coagulation time (HCT) of unadjusted dispersions decreased as the level of Ca removal in powders increased (from 13.81 min in control to 0.46 min in 40% RCMPC) and was negatively correlated with the CIA of the dispersions. For control RCMPC dispersions, the minimum and maximum heat stability were observed at dispersion pH of 6.5 and 6.9, respectively, followed by a decrease at pH 7.1 (CIA was the lowest). Dispersions from 40% RCMPC and pH 7.1 had the maximum HCT of 30.94 min among all RCMPC dispersions at all pH values. From this study, it can be concluded that improved heat stability in high protein formulation beverages subjected to UHT processing could be achieved through calcium reduction in milk protein concentrates using CO₂ injection.     

Geometrically non-linear transient analysis of laminated composite and sandwich shells with a refined theory and C finite elements

A C⁰ continuous finite element formulation of a higher order shear deformation theory is presented for predicting the linear and geometrically non-linear, in the sense of von Karman, transient responses of composite and sandwich laminated shells. The displacement model accounts for the non-linear cubic variation of the tangential displacement components through the thickness of the shell and the theory requires no shear correction coefficients. In the time domain, the explicit central difference integrator is used in conjunction with the special mass matrix diagonalization scheme which conserves the total mass of the element and includes effects due to rotary inertia terms. Numerical results for central transverse deflection and stresses are presented for composite and sandwich laminated shells with various boundary conditions subjected to different types of loads and are compared with the results from other sources. Some new results are also included for future reference.     

Accurate computing of facial expression recognition using a hybrid feature extraction technique

The Journal of Supercomputing - Facial expression recognition (FER) serves as an essential tool for understanding human emotional behaviors. Facial expressions provide a wealth of information about...     

Sugar coated ceramic nanocarriers for the oral delivery of hydrophobic drugs: formulation, optimization and evaluation

In order to enhance the delivery of poorly-soluble drugs, we have explored aquasomes (three-layered, ceramic core based, oligosaccharide coated nanoparticles) as potential carriers for the delivery of model hydrophobic drug piroxicam (log P = 3.1). Ceramic nanoparticles were prepared using two techniques; namely, co-precipitation by refluxing and co-precipitation by sonication. Core preparation was finally done using sonication approach; based on the higher % yield (42.4 ± 0.4%) and shorter duration (1 day) compared to the reflux method (27.4 ± 2.05%, 6 days). Lactose loading onto ceramic core was achieved using adsorption. Colorimetric analysis of lactose coating was done using Anthrone method. Optimization of process variables namely, incubation time and core to coat ratio (for sugar loading) was carried out. Optimum time of incubation was 3 h and the core to coat ratio was 4:1. The drug loading was achieved by incubating the sugar loaded cores in different concentrations of piroxicam solution and it was found that 1.5% w/v piroxicam was optimal. Structural characterization using Fourier-Transform Infra Red Spectroscopy (FTIR) confirmed the presence of sugar coating onto the core. Morphological evaluation using transmission electron microscopy (TEM) revealed spherical nanoparticles (size 56.56 ± 5.93 nm for lactose coated core and 184.75 ± 13.78 nm for piroxicam loaded aquasomes) confirming the nanometric dimensions.     

Dithranol-loaded nanostructured lipid carrier-based gel ameliorate psoriasis in imiquimod-induced mice psoriatic plaque model

Objective: The aim of this study was to formulate nanostructured lipid carriers (NLCs) of dithranol-loaded in gel for ease of application and to evaluate its anti-psoriatic efficacy vis-a-vis conventional ointment formulation.

Significance: This study will provide an insight about the use of nanocarriers, esp. NLCs loaded with dithranol for the effective treatment of psoriasis.

Methods: Dithranol-loaded NLCs were prepared by hot melt homogenization method and characterized for particle size and percentage entrapment efficiency. The optimized NLCs were loaded into gel and evaluated for drug release, spreadability, rheological behavior, and staining. Anti-psoriatic efficacy of the NLC gel was evaluated in imiquimod (IMQ) induced psoriatic plaque model in comparison with prepared conventional ointment formulation (1.15% w/w dithranol).

Results: NLCs were prepared with particle size below 300?nm, polydispersity index (PDI) below 0.3 and percentage entrapment efficiency of ～100%. The prepared NLC gel was then compared with the ointment for drug release, staining property, and efficacy. Topical application of dithranol-loaded NLC gel on IMQ-induced psoriatic plaque model reduced the symptoms of psoriasis assessed by both Psoriasis area severity index (PASI) scoring and enzyme-linked immunosorbent assay. There was a significant reduction in disease severity and cytokines like Interleukins-17, 22, 23 and Tumor necrosis factor-α by the developed system in comparison to the negative control.

Conclusions: To conclude dithranol-loaded NLCs in gel base was efficacious in management of psoriasis at the same drug concentration and also offer less cloth staining to that of the ointment product.     

Effect of Green Gram Husk Nanocellulose on Banana Fiber Composite

Nanocellulose is a significant bio entity in the present-day applications of nanocomposites. In this regard, the present work focuses on fabrication of green gram husk cellulose-based hybrid nanocomposites. In the process of nanocellulose extraction, residues obtained after each stage of treatment are characterized through physical and morphological tests. Later, nanocellulose is reinforced in unsaturated polyester with 1, 3, 5, and 7 wt. % to study the tensile properties. The peak tensile strength is found to be 39 MPa at 5wt% of cellulose nanocomposites. Noting the enhancement in tensile properties of nanocomposites, nanocellulose is reinforced in banana fiber composites and its influence on mechanical properties is studied. Nanocellulose/banana fiber hybrid composites showed enhanced tensile strength, flexural strength, and impact strength.     

Advances in computer–human interaction for detecting facial expression using dual tree multi band wavelet transform and Gaussian mixture model

Neural Computing and Applications - In human communication, facial expressions play an important role, which carries enough information about human emotions. Last two decades, it becomes a very...