Fabrication and properties of pressure-sintered reaction-bonded Si3N4 ceramics with addition of Eu2O3–MgO–Y2O3

Dense pressure-sintered reaction-bonded Si₃N₄ (PSRBSN) ceramics were obtained by a hot-press sintering method. Precursor Si powders were prepared with Eu₂O₃–MgO–Y₂O₃ sintering additive. The addition of Eu₂O₃–MgO–Y₂O₃ was shown to promote full nitridation of the Si powder. The nitrided Si₃N₄ particles had an equiaxial morphology, without whisker formation, after the Si powders doped with Eu₂O₃–MgO–Y₂O₃ were nitrided at 1400 °C for 2 h. After hot pressing, the relative density, Vickers hardness, flexural strength, and fracture toughness of the PSRBSN ceramics, with 5 wt% Eu₂O₃ doping, were 98.3 ± 0.2%, 17.8 ± 0.8 GPa, 697.0 ± 67.0 MPa, and 7.3 ± 0.3 MPa m^1/2, respectively. The thermal conductivity was 73.6 ± 0.2 W m^?1 K^?1, significantly higher than the counterpart without Eu₂O₃ doping, or with ZrO₂ doping by conventional methods.     

Effect of Nb content on the phase composition,densification, microstructure,and mechanical properties of high-entropy boride ceramics

Dense high-entropy (Hf,Zr,Ti,Ta,Nb)B₂ ceramics with Nb contents ranging from 0 to 20 at% were produced by a two-step spark plasma sintering process. X-ray diffraction indicated that a single-phase with hexagonal structure was detected in the composition without Nb. In contrast, two phases with the same hexagonal structure, but slightly different lattice parameters were present in compositions containing Nb. The addition of Nb resulted in the presence of a Nb-rich second phase and the amount of the second phase increased as the Nb content increased. The relative densities were all >99.5 %, but decreased from ～100 % to ～99.5 % as the Nb content increased from 0 to 20 at%. The average grain size decreased from 13.9 ± 5.5 μm for the composition without Nb additions to 5.2 ± 2.0 μm for the composition containing 20 at% Nb. The reduction of grain size with increasing Nb content was due to the suppression of grain growth by the Nb-rich second phase. The addition of Nb increased Young’s modulus and Vickers hardness, but decreased shear modulus. While some Nb dissolved into the main phase, a Nb-rich second phase was formed in all Nb-containing compositions.     

Experimental Investigation on Low-Velocity Impact Performance of 3D Woven Textile Composites

Applied Composite Materials - The objectives of this experimental study are to develop impact-resistant three-dimensional (3D) woven textile-reinforced composites as well as to clarify the...     

水泥对红壤pH值及植物生长影响的试验研究

中国南方地区广泛分布的酸性红壤严重影响植物的正常生长.针对此问题,以水泥掺量为0.1％、1％、2％、3％、4％的红壤为研究对象,开展了水泥对红壤pH值影响试验和盆栽种植试验.水泥对红壤pH值影响试验结果表明:红壤pH值随着水泥掺量的增加而增加,并随养护时间增加,pH值不断减小.养护28 d后,水泥掺量每增加1％,红壤pH值增加0.75.盆栽种植试验研究表明:当水泥掺量为0.1％时,狗牙根发芽率和生长高度表现最好,随着水泥掺量的增加,狗牙根发芽率降低,生长高度不断减小.水泥掺量每增加1％,狗牙根发芽率减少12.63％,狗牙根生长高度排序为:0.1％＞1％＞2％＞3％＞4％.     

单自由度八杆仿生机构构型与尺度同步设计方法

单自由度八杆仿生机构杆长参数较多，是仿生机器人领域研究的难点之一。为提高设计效率，提出一种构型与尺度同步设计方法。在选定的运动链和机架的基础上，以不等式形式分步给出运动可行性及外形约束条件，使得上一步的杆长可作为下一步求解的已知值。通过该过程，在得到八杆仿生机构构型的同时，快速得到所有杆长的初步可行域。循环上述过程，逐步缩小约束条件的范围，可使得八杆机构的杆长快速接近目标值。在此基础上，分类讨论了连杆搭接顺序、约束条件及基本运动链的差异对求解难度及构型结果的影响。利用所提出的单自由度八杆仿生机构的设计方法，在对初始条件进行合理选取的前提下，可在初步得到构型的同时将杆长限定在较小范围内，实现了构型与尺度的同步设计。该方法还可应用于其他单自由度机构的设计当中，具有较好的借鉴意义。     

瓦斯抽放钻孔涌水综合治理技术实践

针对高河矿W4307回风顺槽132-1#瓦斯抽放钻孔在施工过程中出水的问题,分析出水原因,在不起拔钻孔钻杆的情况下,对瓦斯抽放钻孔进行扩孔、安装套管、注浆固管及安装阀门控制放水,保证了孔口管的固结效果。试验表明:在放水过程中钻孔没有出现破坏,孔口管壁没有出现渗水和涌水现象,瓦斯抽放钻孔涌水治理效果良好。     

含新型有机硅缓蚀剂的制备及性能研究

为了研究缓蚀剂组分及添加条件对发射药性的影响,设计并制备了一种含新型有机硅的缓蚀剂材料;采用烧蚀管法,对比石蜡+TiO2型缓蚀剂,研究了新型有机硅缓蚀剂的静态降烧蚀效果;采用密闭爆发器研究了不同缓蚀剂添加条件对高能硝胺发射药点火和燃烧性能的影响;采用14.5mm弹道枪和壁温测试装置,研究不同缓蚀剂添加条件对膛壁温度、内弹道性能和枪口烟雾的影响。结果表明,采用含新型有机硅的缓蚀剂,降烧蚀效果更为显著;随着缓蚀剂添加量的增加,压力峰值、弹丸初速也会产生小幅下降,但总体影响幅度较小;添加缓蚀剂后,射击过程膛壁峰值温度显著下降,下降幅度随着缓蚀剂添加量的增加而增加,在缓蚀剂质量分数为3%时,对身管壁温降低幅度可达17.1%,且产生的枪口烟雾量较少;在缓蚀剂质量分数为5%时,缓蚀剂添加过量,枪口产生较大烟雾。该缓蚀剂及添加条件有望应用于低烧蚀发射药配方中。     

Personalized broad learning system for facial expression

Multimedia Tools and Applications - Understanding human emotions through facial expressions is key enabling technology for interactive robots. Most approaches of facial expression recognition are...     

Dichloroacetate Radiosensitizes Hypoxic Breast Cancer Cells

Mitochondrial metabolism is an attractive target for cancer therapy. Reprogramming metabolic pathways can potentially sensitize tumors with limited treatment options, such as triple-negative breast cancer (TNBC), to chemo- and/or radiotherapy. Dichloroacetate (DCA) is a specific inhibitor of the pyruvate dehydrogenase kinase (PDK), which leads to enhanced reactive oxygen species (ROS) production. ROS are the primary effector molecules of radiation and an increase hereof will enhance the radioresponse. In this study, we evaluated the effects of DCA and radiotherapy on two TNBC cell lines, namely EMT6 and 4T1, under aerobic and hypoxic conditions. As expected, DCA treatment decreased phosphorylated pyruvate dehydrogenase (PDH) and lowered both extracellular acidification rate (ECAR) and lactate production. Remarkably, DCA treatment led to a significant increase in ROS production (up to 15-fold) in hypoxic cancer cells but not in aerobic cells. Consistently, DCA radiosensitized hypoxic tumor cells and 3D spheroids while leaving the intrinsic radiosensitivity of the tumor cells unchanged. Our results suggest that although described as an oxidative phosphorylation (OXPHOS)-promoting drug, DCA can also increase hypoxic radioresponses. This study therefore paves the way for the targeting of mitochondrial metabolism of hypoxic cancer cells, in particular to combat radioresistance.     

The origin of the modulated structure in Sr2CuO3+δ (δ = 0.4): [CuO2] in-plane oxygen vacancy or apical oxygen vacancy?

We propose the question of the modulated structures of copper oxide is caused by the [CuO₂] in-plane oxygen vacancy or apical oxygen vacancy. Sr₂CuO_3+δ single-crystal samples were prepared using high-temperature and high-pressure methods. The major phase of Sr₂CuO_3+δ (δ = 0.4) single-crystal system is found to be constituted by the 5 a modulated structure with the Fmmm space group, which originates from the [CuO₂] in-plane oxygen vacancy appearing in octahedral Cu-O. Besides, the presence of the [CuO₂] in-plane oxygen vacancy may obliterate the superconductivity of the system. Experimental results deduce that the oxygen vacancy may appear in the apical oxygen sites in high-temperature copper oxide superconductors.